1m CAT6A Patch Cable Grey 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

1m CAT6A Patch Cable Yellow 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

1m CAT8 ethernet cable compliant with CAT8.1 for up to 25/40 gigabit network connections. The cable standard provides performance of up to 2000 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) 10GBASE-T (10 Gigabit Ethernet) 25GBASE-T (25 Gigabit Ethernet) & 40GBASE-T (40 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6a Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 25/40 Gigabit Ethernet supports 25/40GE. S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified

Specification 1m CAT8 Network Cable (CAT8.1) Supports 25/40 Gbps Ethernet S/FTP Shielded Cable 26AWG Copper Conductors Full Copper RJ45 50u gold plated connectors LSOH (Low Smoke Zero Halogen)

...

Our range of HDMI to DVI cables are bi-directional so can be used as HDMI to DVI or DVI to HDMI. The DVI-D connector will fit into DVI-D or DVI-I sockets but only supports the DVI-D digital signal. HDMI connector uses 19 pins connected to the DVI-D pins on the DVI connector supporting single link.

Specification HDMI <> DVI-D HDMI Type A male connector DVI-D single link connector Gold plated contacts Overall diameter 6mm 30 AWG conductors Supported resolutions 1080p @ 60 Hz (1920 x 1080) 1920 x 1200 & below.

...

External Serial ATA data cable for connecting external devices such as harddrive enclosures directly to your computer or computers e SATA backplate. Specification SATA Revision 2 3GB/s> e SATA 7 pin connector> 1 Metre> 26AWG ...

1m Flat VGA Cable ideal to be used under carpets or flooring only 2.5mm thick.

Specification Length 1 meter Cable

...

1m swivel & rotate angled HDMI cable High Speed with Ethernet supports HDMI 1.4 HDMI 2.0 & all previous HDMI versions.



...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification: 1 Meter Green UTP (Unshielded Twisted Pair) Cat 5e Low Smoke Zero Halogen Snagless Boot 24 AWGx 4P 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288 ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 1 Meter Red UTP (Unshielded Twisted Pair) Cat 5e Low Smoke Zero Halogen Snagless Boot 24 AWGx 4P3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288 ...

The 99CDLHD4MICRO series has a Micro (Type D) connector that was introduced with HDMI v 1.4. It keeps the standard 19 pins used in the Type A connector but shrinks it down to 2.8mm x 6.4mm. The Micro connector is to be used on mobile phones & other similar portable devices. The other side of the cable has a standard Type A connector for connecting to TVs & projectors etc.. The term HDMI v 1.4 is no longer used & instead is referred to as High Speed with Ethernet. Specification: HDMI Type A to Micro HDMI Type D Connectors HDMI High Speed with Ethernet Length 1m 32AWG Copper Cores Outer Diameter of 4.5mm PVC Jacket 4k x 2k Resolution Support ...