Our 8k Ultra High Speed HDMI Cable are designed to support the latest HDMI v 2.1

Specification. This cable ensures

...

Our 8k Ultra High Speed HDMI Cable are designed to support the latest HDMI v 2.1

Specification. This cable ensures

...

1m angled 3.5mm jack cable 90 degree jack plugs both ends ideal to be used in tight spaces. ...

1m angled figure 8 power lead UK 3 pin plug to angled figure 8 style plug. UK 3 pin plug to 90 degree angled C7. ...

1m Black RJ11 ADSL modem cable connects a broadband router to an ADSL microfilter. 4 core straight wired lead. ...

The BNC connector is used for RF signal connections for analogue & Serial Digital Interface video signals & CCTV equipment. It is also an alternative to the RCA connector when used for composite video on commercial video devices. Specifications 1 Meter Black moulded cable RG-58/U Coaxial Cable 50 Ohm BNC cable ...

1m C14 to C15 power cable designed to allow you to connect equipment that has a C16 socket (C15 on cable) such as servers & rack-mount switches to UPS or PDUs with C13 outputs (C14 on cable). The C15 connector although similar in appearance to the C13 has a higher temperature rating of 170 degrees rather than 70 degrees. You can tell the difference between a C13 & a C15 connector by the notch in the connector; this means a C15 plug will work with a C14 & a C16 socket. A C13 plug however will only work in a C14 socket.

Specification IEC C14 to IEC C15 3G 0.75mm Cable (H05RR-F) Length 1 metre Rubberized Power Cable VDE Approved C14 Connector VDE Approved C15 Connector VDE Approved C14 Cable

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 1 Metre Green UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

1m CAT6 Network Patch Cable
- Ethernet Cable
- FTP shielded with moulded RJ45 plugs. ...

1m white CAT8 network cable compliant with CAT8.1 for up to 25/40 gigabit network connections. The cable standard provides performance of up to 2000 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) 10GBASE-T (10 Gigabit Ethernet) 25GBASE-T (25 Gigabit Ethernet) & 40GBASE-T (40 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6a Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 25/40 Gigabit Ethernet supports 25/40GE. S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified

Specification 1m white CAT8 Ethernet Cable (CAT8.1) Supports 25/40 Gbps Networking S/FTP Shielded Cable 26AWG Copper Conductors Full Copper RJ45 50u gold plated connectors LSOH (Low Smoke Zero Halogen)

...