Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 15 Meter Red UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

15m CAT6 Network Patch Cable
- Ethernet Cable
- FTP shielded with moulded RJ45 plugs. ...

15m CAT6A Network Cable Yellow 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Length 15 metre ...

15m CAT6A SSTP LSOH Network Cable Blue 10 G Base-T Pure Copper Category 6A network cable commonly referred to as CAT6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSOH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). SFTP (or SSTP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a "bubble" which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

LC-LC Fibre optic cable 62.5/125 15m OM1 ...

LC-SC Fibre optic cable 62.5/125 15m OM1 ...

Fibre Optic Cable LC
- SC Orange 50/125
- 15m OM2 ...

Fibre Optic Cable LC
- ST Orange 50/125
- 15m ...

ST-SC Fibre optic cable 62.5/125 15m OM1 ...

AOC is short for Active Optical Cable which is the latest in cabling technology. AOC removes the copper conductors & replaces them with fibre optical cores & a small transmitter & receiver in the connectors. Copper cores still remain to carry power along the cable. The use of fibre optical cores allows the cable to be thinner & lighter The barriers of cable length is no longer a problem By using fibre optical cores EMC interference from power cables & lighting is no longer an issue. The cables also produce much less EMC themselves No signal loss over long distances No extenders boosters or runs of CAT5e needed. These simply connect to your host & device like a standard cable Our AOC comes in frustration free packaging These cables do not support video or power delivery. Specification: 15m USB (Universal Serial Bus) 3.1 C Male to USB (Universal Serial Bus) 3.1 C Male Supports 10 Gbps Metal Connectors Length 15 meters 4 Fibre cores / 4 Copper cores Supports 5v 900m A Cable Outer Diameter 4.5mm Cable Bend Radius 9mm CPR rated Frustration free packaging ...