15m 2x Phono to 3.5mm Aux In Cable Shielded 15m 3.5mm jack plug to 2x phono cable. 2x phono plugs / RCA plugs to 3.5mm Jack Plug. Gold plated connectors. Shielded Cable Ideal for connecting an ipod or MP3 player to a hi-fi or car audio aux input. Length 15m. ...

Our economy range of audio cables are assembled with nickel plated connectors for tarnish free low loss audio transfer ideal for your low cost audio needs.

Specification 3.5mm Stereo plug to 2x RCA Phono Plugs. Length 15 Meters. Nickel plated connectors.

...

Our standard range of audio cables are assembled with gold connectors for a higher quality connection between audio devices. Our three RCA plugs are assembled with left & right audio & yellow composite plugs.

Specification 3x RCA Plugs (Left Right + Video)
- 3x RCA Plugs (Left Right + Video) Gold 15 Meter


...

15m CAT6 Network Patch Cable Black Category 6 cable commonly referred to as CAT6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the CAT5/5e & Category 3 cable standards. Compared with CAT5 & CAT5e CAT6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. Ideal for home or office use.

Specification Length 15m Black UTP (Unshielded Twisted Pair) CAT 6 Moulded 24AWG x 4P (4 Pairs) Patch Type CM (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 & TIA/EIA-563-B.2-1 ETL/3P VERIFIED

...

15m CAT6 Network Cable Blue Category 6 cable commonly referred to as CAT6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the CAT5/5e & Category 3 cable standards. Compared with CAT5 & CAT5e CAT6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. Ideal for home or office use.

Specification Length 15m Blue UTP (Unshielded Twisted Pair) CAT 6 Moulded 24AWG x 4P (4 Pairs) Patch Type CM (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 & TIA/EIA-563-B.2-1 ETL/3P VERIFIED

...

Crossover cables are designed for connecting two computers together without a switch (or linking switches together) Specification 15 Meter Grey cable with black boots FULL DUPLEX Crossover wiring spec UTP (Unshielded Twisted Pair) ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethern Specification 15 Meter Grey cable with Black boots UTP (Unshielded Twisted Pair) Cat 5e Moulded 26 AWGX4P ETL VERIFIED ISO/IEC 11801 & TIA/EIA 568B.2 E213738 CM (UL) C (UL) ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet.

Specification Full copper CAT5e cable UTP (Unshielded Twisted Pair) RJ45 connectors for network ethernet connections Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P Full copper cable

...

15m CAT6A Red Network Cable 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Length 15 metre ...

15m CAT6A Network Cable White for 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...