10m white HDMI cable high speed with ethernet supports HDMI 1.4 & HDMI 2.0 equipment functions backwards compatible with older HDMI revisions. HDMI High Speed with Ethernet Supports 3D over HDMI Supports 1080p & 2160p 4K x 2K Resolutions Audio return channel HDMI Ethernet channel Gold flashed contacts White PVC jacket & hoods Length 10 Meter ...

15m Snagless Network Cable CAT5e UTP Yellow. CAT5e is a twisted pair cable used to connect network equipment. Most cables are unshielded relying on the twisted pair design for noise rejection. Ideal for connections between modems routers & network switches suitable for home & office use.

Specification Length 15 Meter Colour Yellow UTP (Unshielded Twisted Pair) CAT5e Pure Copper Cable Low Smoke Zero Halogen (LSOH) Snagless Boot 24 AWG x 4P (4 Pairs) 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288

...

15m Snagless Network Cable CAT5e UTP Red. CAT5e is a twisted pair cable used to connect network equipment. Most cables are unshielded relying on the twisted pair design for noise rejection. Ideal for connections between modems routers & network switches suitable for home & office use.

Specification Length 15 Meter Colour Red UTP (Unshielded Twisted Pair) CAT5e Pure Copper Cable Low Smoke Zero Halogen (LSOH) Snagless Boot 24 AWG x 4P (4 Pairs) 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288

...

Cable ties are manufactured from Nylon 66 with an operation temperature range of -40 to 85 degrees Celsius. Cables ties have multiple uses one of which would be cable management with a length of 150mm they are also ideal for network cable installations. Release tab for easy removal & re-use. Specification: Nylon Cable Tie Length 150mm Width 3.6mm Packs of 100 Flame Rating 94V-2 ...

Cable ties are manufactured from Nylon 66 with an operation temperature range of -40 to 85 degrees Celsius. Cables ties have multiple uses one of which would be cable management with a length of 150mm they are also ideal for network cable installations. Release tab for easy removal & re-use. Specification: Nylon Cable Tie Length 150mm Width 3.6mm Packs of 100 Flame Rating 94V-2 ...

Serial ATA power cable for converting 4 pin molex connector into 15 pin SATA power connector. Specification: 4 Pin Molex to Serial ATA Power Supply 4 Pin male molex power 15pin female SATA power 0.2MTR 18 AWG ...

USB 2.0 Micro B data cable for connecting devices such as mobile phones digital cameras & various other devices with a micro USB (Universal Serial Bus) port. This cable can also be used to charge applicable devices.

Specification USB (Universal Serial Bus) 2.0 short micro USB (Universal Serial Bus) cable Type A to Micro B Connectors Length 15cm colour white

...

3.5mm extension lead male jack plug to female socket cable 15m can be used to extend a 3.5mm jack cable or as a headphone extension cable. ...

High quality 15m brown network patch cable CAT5e

Specification constructed from full copper 26AWG cable.





...

15m CAT6A Patch Cable Green 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...