Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 1.5 Meter Grey UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 1.5 Meter Grey UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

1.5m CAT6A Patch Cable Grey 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

Our CDLDV range of HDMI to DVI cables are for connecting HDMI devices for DVI-D use only & come with Gold flashed connectors. HDMI connector uses 19 pins connected to the DVI-D pins on the DVI connector making it DVI-D single link. Please note: While the connector has the appearance of dual link the dual link pins are not connected to achieve HDMI to DVI-D dual link & active adapter cable will be required.

Specification DVI 24+1 Pin Connector (only single link pins connected) DVI-D Single Link 1920 x 1200 (WUXGA) @ 60 Hz HDMI 19 pin Gold flashed contacts Black cable Passive cable

...

1.5m Ethernet Cable CAT6A violet. Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Length 1.5m ...

90 Degree 3.5mm jack to jack cable right angle 3.5mm plug both ends. 3.5mm Right Angle to Right Angle Male to Male Connectors 3.5mm Stereo Jack (TRS) Gold Plated Black Length: 1.5 metre ...

Our SCART to S-VHS cables are built for audio & visual. Specification: SCART to S-VHS & twin RCA audio Gold contacts 1.5 Meter ...

Our SCART to composite cables are built for audio & visual.

Specification Scart Plug
- 3x RCA (Audio Left Right


...

Our SCART to Composite Video comes with left & right audio & an input/output switch giving you control over signal direction.



...

Our slim range of Gigabit ethernet cables have an outer diameter of only 2.8mm making these cables ideal for high-density networking set-ups such as inside racks & cabinets. The ERSLIM range are tested to CAT6 specifications but because the cables are 32AWG they are not recommended for use with Power over Ethernet (Po E).

Specification CAT6 UTP (Unshielded Twisted Pair) Gigabit Ethernet Cable / Patch Cable Super slim 2.8mm diamter Moulded connectors 32 AWG (Stranded) full copper pairs Low smoke zero halogen LSZH / LSOH Length 1.5m Colour yellow

...