Our standard range of audio cables are assembled with gold connectors for a higher quality connection between audio devices. Our three RCA plugs are assembled with left & right audio & yellow composite plugs.

Specification 3x RCA Plugs (Left Right + Video)
- 3x RCA Plugs (Left Right + Video) Gold 1.2 Meter


...

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs. The 1RR-01 is a nickel single RCA cable (sometimes known as a phono cable) for use with audio equipment typical use would be for mono applications or as a left channel on stereo equipment.

Specification 1x RCA Plug (Black)
- 1x RCA Plug (Black) Nickel 1.2 Meter


...

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs. For use with audio equipment where left & right channels are needed RED denotes right channel while BLACK denotes left. Specification: Two RCA Plug to Two RCA Plug 1.2 Meter Nickel connectors ...

The combination laptop security cable can be used to secure a laptop computer connecting to the inbuilt security slot to a desk leg or secure mount (not included). It has an adjustable combination lock that has a 10 000 possible codes. Specification Combination lock 10 000 different combinations Sealed oiled cable reduces corrosion Length 1.4m ...

1.5 meter white HDMI cable high speed with Ethernet cable Sharpview Gold white series Gold Plated for the ultimate in high definition picture transfer. ...

3.5mm Jack Plug to 2x Phono Cable 1.5m Premium. 1.5m 3.5mm jack plug to 2x phono cable. 3.5mm stereo jack plug to 2x phono plugs / RCA plugs. Gold plated connectors. Ideal for connectin an ipod or MP3 player to a hi-fi or car audio system with phono / rca inputs. ...

For 3.5mm Jack Plug to 6.3mm (1/4inch) Jack Plug audio equipment. Being bi-directional it can also be used to connect from a mono 6.35mm device into a 3.5mm mono connection or vice versa. Gold flashed contacts for better connection & anti-corrosion properties.

Specification 6.35mm Mono Jack Plug 3.5mm Mono Jack Plug Length 1.5 meter For mono audio connections Gold connectors

...

1.5m angled 3.5mm jack cable 90 degree jack plugs both ends ideal to be used in tight spaces. ...

1.5m CAT6A Patch Cable Black 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

1.5m CAT6A Patch Cable Green 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...