Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e or Ethernet patch cable. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networking. Specification: 0.5 Meter Green UTP (Unshielded Twisted Pair) Cat 5e Snagless Boot 24 AWG E213738 CM (UL) C (UL) 4P ISO/IEC 11801 & TIA/EIA 568B.2 ...

0.5m OM3 ST to SC fibre optic network cable ST to SC connectors aqua colour low smoke zero halogen jacket with 50um fibre core & 125um cladding. The OM3 range of optic fibre network cables offer a higher bandwidth & greater distance over OM2 cables.

Specification ST
- SC Connectors 50um core 125um cladding Duplex Multi-mode OM3 Supports 10 Gb Length 0.5 Meter Aqua LSZH jacket Insertion Loss 0.3d B Diameter 3.0mm Bend radius: 60mm Operating temperature: -20
- 60 deg C



...

0.5m USB (Universal Serial Bus) cable A to B ideal for connecting printers or peripherals to PCs or laptops etc. Specification: USB (Universal Serial Bus) 2.0

Specification USB (Universal Serial Bus) A male to B male 4 Pin Shield & Braid Length 0.5 meter 28/26 awg Black Cable

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 0.5 Meter violet UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

0.5m white C13 to C14 power extension cable more commonly known as a kettle lead extension cable is used for powering a variety of electrical appliances such as PC base units monitors printers & photocopiers & a whole host of other equipment.

Specification IEC Extension Cable UK Mains Extension IEC Male C14 to IEC Female C13 Length 0.5 meter 0.75mm Core Colour White

...

1.5m CAT6A Patch Cable Blue 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

1.5m CAT6A Patch Cable Yellow 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 1.5 Metre violet UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

1.5m F type cable for satellite or cable tv connections screw on F connectors suitable for Sky Sky HD Virgin Media & Virgin Media HD etc.F Connectors each end Male
- Male Screw-on 75ohm Coaxial Cable Gold connectors Colour black Length 1.5 Meter
...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 1.5 Metre Red UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...