High quality 50cm brown network patch cable CAT5e

Specification constructed from full copper 26AWG cable.





...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 0.5 Meter Black UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 0.5 Meter Blue UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 0.5 Meter Green UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

0.5m CAT6A Patch Cable Black 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

0.5m IEC (C13) to IEC (C14) power extension cable more commonly know as a kettle lead extension cable is used for powering a variety of electrical appliances such as PC base units monitors printers & photocopiers & a whole host of other equipment.

Specification IEC Extension Cable UK Mains Extension IEC Male (C14) to IEC Female (C13) 0.5 meter 0.75mm 2 Core

...

Category 6 cable commonly referred to as Cat-6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz.

Specification 0.5 Meter White UTP (Unshielded Twisted Pair) Cat 6 250 M Hz LSZH (Low Smoke Zero Halogen) Moulded Snagless Boot 24 AWG X4P 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3.C-TIA/EIA-568-B.2-1 & ISO/IEC 11801 & EN 50288

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification: 0.5 Meter Blue UTP (Unshielded Twisted Pair) Cat 5e Low Smoke Zero Halogen Snagless Boot 24 AWGx 4P 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288 ...

Category 6 cable commonly referred to as Cat-6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz.

Specification 0.5 Meter Red UTP (Unshielded Twisted Pair) Cat 6 250 M Hz LSZH (Low Smoke Zero Halogen) Moulded Snagless Boot 24 AWG X4P 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3.C-TIA/EIA-568-B.2-1 & ISO/IEC 11801 & EN 50288

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 0.5 Metre White UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...