Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 0.25 Meter Pink UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

Short ethernet cable 0.25m (25cm) blue CAT6 full copper cable for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e. ideal to be used with home or office networks & lan connections.

Specification Short 0.25 meter cable Colour Blue UTP (Unshielded Twisted Pair) CAT 6 Moulded 24AWG x 4 Pair Patch Type CM (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 & TIA/EIA-563-B.2-1 ETL/3P VERIFIED

...

Short ethernet cable 0.25m (25cm) green CAT6 full copper cable for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e. ideal to be used with home or office networks & lan connections.

Specification Short 0.25 meter cable Colour Green UTP (Unshielded Twisted Pair) CAT 6 Moulded 24AWG x 4 Pair Patch Type CM (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 & TIA/EIA-563-B.2-1 ETL/3P VERIFIED

...

Syndicat des Constructeurs d Appareils Radiorecepteurs et Televiseurs (SCART) A French originated standard & associated 21-pin connector for connecting audio-visual (AV) equipment together. Our cables & connectors are built to SCART standards. Two way SCART splitter box with switch for convenient switching between sources to reduce interference. Specification: 1 Male to 2 Female Plastic Housing Switch ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Eth Specification 0.5 Mtr Black UTP (Unshielded Twisted Pair) CAT5e Moulded Low Smoke Zero Halogen ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet Specification 0.5 Mtr Grey UTP (Unshielded Twisted Pair) CAT5e Moulded Low Smoke Zero Halogen ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 0.5 Meter Orange UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

0.5m CAT6A Patch Cable Red 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet.

Specification 0.5 Mtr Grey FTP (Foil Twisted Pair) Cat 5e Assembled Verified For Gigabit Ethernet 26AWG X 4P TYPE CM (UL) C (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 3P

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification: 0.5 Meter Grey UTP (Unshielded Twisted Pair) Cat 5e Low Smoke Zero Halogen Snagless Boot 24 AWGx 4P 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288 ...