This 3-foot vertical cable manager gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 20U or larger. The panel features a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation it's easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n The cable manager uses a D-ring method of cable management to run cables vertically along the side of your rack, neatly guiding them between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Having neatly organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Hassle-free compatibility with your rack\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mount devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER20UD is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Type Cable management panel Product colour Black Housing material Steel Rack capacity 20 U Ro HS compliance Y Width 863.6 mm Depth 50 mm Height 87 mm Weight 760 g Quantity per pack 1 pc (s) Package width 50 mm Package depth 865 mm Package height 63 mm Package weight 1.5kg Screws included N ...

This 3-foot vertical cable manager gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 20U or larger. The panel features a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation it's easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n The cable manager uses a D-ring method of cable management to run cables vertically along the side of your rack, neatly guiding them between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Having neatly organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Hassle-free compatibility with your rack\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mount devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER20UD is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Type Cable management panel Product colour Black Housing material Steel Rack capacity 20 U Ro HS compliance Y Width 863.6 mm Depth 50 mm Height 87 mm Weight 760 g Quantity per pack 1 pc (s) Package width 50 mm Package depth 865 mm Package height 63 mm Package weight 1.5kg Screws included N ...

This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the two-panel cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 40U or larger. The panels feature a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation they&153;re easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n The cable manager uses a D-ring method of cable management that neatly guides cables running through it. Having well organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Configurable installation options with two 3 ft. panels\n This versatile cable management system consists of two 3-foot panels, so you can configure each panel as needed to accommodate all of your equipment. You can install the individual panels end to end (top to bottom), so that they span the height of your rack, or on either side or the front & back of your rack to manage cables in multiple locations. \n\n The two-piece cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Hassle-free compatibility with your rack\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER40UD is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Product colour Black Housing material Steel Rack capacity 40 U Ro HS compliance Y Width 1727.2 mm Depth 50 mm Height 87 mm Weight 1.5kg Quantity per pack 2 pc (s) Package width 50 mm Package depth 865 mm Package height 63 mm Package weight 2.1kg Screws included Y ...

This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the two-panel cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 40U or larger. The panels feature a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation they&153;re easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n The cable manager uses a D-ring method of cable management that neatly guides cables running through it. Having well organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Configurable installation options with two 3 ft. panels\n This versatile cable management system consists of two 3-foot panels, so you can configure each panel as needed to accommodate all of your equipment. You can install the individual panels end to end (top to bottom), so that they span the height of your rack, or on either side or the front & back of your rack to manage cables in multiple locations. \n\n The two-piece cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Hassle-free compatibility with your rack\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER40UD is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Product colour Black Housing material Steel Rack capacity 40 U Ro HS compliance Y Width 1727.2 mm Depth 50 mm Height 87 mm Weight 1.5kg Quantity per pack 2 pc (s) Package width 50 mm Package depth 865 mm Package height 63 mm Package weight 2.1kg Screws included Y ...

Organize your cables in any rack or cabinet that&153;s 20U or larger, using this vertical cable management panel\n\n This 3-foot vertical cable manager gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 20U or larger. The panel features a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation, it's easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n\n The vertical cable manager uses a finger-duct method of cable management, which

Includes:: a cover panel that neatly conceals the cables that are running through it. The cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Having neatly organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Hassle-free compatibility with your rack\n\n For maximum compatibility with virtually any server rack, you can install the cable-management panel using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panel through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER20UF is backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Improve the appearance of your rack using a vertical cable manager with finger ducts\n- Promote passive cooling in your rack by organizing cables to improve airflow\n- Make your rack more accessible by organizing your cables for hassle-free maintenance Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 20 U Ro HS compliance Y Width 852.2 mm Depth 100 mm Height 73 mm Weight 2.3kg Quantity per pack 1 pc (s) Package width 160 mm Package depth 945 mm Package height 128 mm Package weight 2.8kg Quick installation guide Y Screws included Y Screw type M5 Number of screws 4 Nuts included Y Number of nuts 2 Cage nuts included Y Number of cage nuts 4

...

Organize your cables in any rack or cabinet that&153;s 40U or larger, using this vertical cable management panel\n\n This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the two-panel cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 40U or larger. The panels feature a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation, they&153;re easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n\n The vertical cable manager uses a finger-duct method of cable management, which

Includes:: a cover panel that neatly conceals the cables that are running through it.\n\n Having well organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Configurable installation options\n\n This versatile cable management system consists of two 3-foot panels, so you can configure each panel as needed to accommodate all of your equipment. You can install the individual panels end to end (top to bottom) so that they span the height of your rack, or on either side or the front & back of your rack to manage cables in multiple locations. \n\n The two-piece cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Hassle-free compatibility with your rack\n\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER40UF is backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Improve the appearance of your rack using a vertical cable manager with finger ducts\n- Promote passive cooling in your rack by organizing cables to improve airflow\n- Make your rack more accessible by organizing your cables for hassle-free maintenance & scalability Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 40 U Ro HS compliance Y Certification REACHWidth 100 mm Depth 1704 mm Height 73 mm Weight 1.7kg Quantity per pack 2 pc (s) Package width 234 mm Package depth 351 mm Package height 171 mm Package weight 2.4kg Quick installation guide Y Screws included Y Number of screws 8 Nuts included Y Number of nuts 8

...

Organize your cables in any rack or cabinet that&153;s 40U or larger, using this vertical cable management panel\n\n This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the two-panel cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 40U or larger. The panels feature a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation, they&153;re easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n\n The vertical cable manager uses a finger-duct method of cable management, which

Includes:: a cover panel that neatly conceals the cables that are running through it.\n\n Having well organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Configurable installation options\n\n This versatile cable management system consists of two 3-foot panels, so you can configure each panel as needed to accommodate all of your equipment. You can install the individual panels end to end (top to bottom) so that they span the height of your rack, or on either side or the front & back of your rack to manage cables in multiple locations. \n\n The two-piece cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Hassle-free compatibility with your rack\n\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER40UF is backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Improve the appearance of your rack using a vertical cable manager with finger ducts\n- Promote passive cooling in your rack by organizing cables to improve airflow\n- Make your rack more accessible by organizing your cables for hassle-free maintenance & scalability Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 40 U Ro HS compliance Y Certification REACHWidth 100 mm Depth 1704 mm Height 73 mm Weight 1.7kg Quantity per pack 2 pc (s) Package width 234 mm Package depth 351 mm Package height 171 mm Package weight 2.4kg Quick installation guide Y Screws included Y Number of screws 8 Nuts included Y Number of nuts 8

...

Dual-Monitor Mount &pipe; Height Adjustable &pipe; For up to 27" Monitors\n\n This vertical dual-monitor st&, with its sleek aluminum design, raises two displays off the surface of your desk or table, to save space while increasing your productivity. With its robust construction, the freestanding dual-monitor mount securely holds two VESA mount monitors, each up to 27", stacked vertically.\n\n Configure Your Displays to Enhance Productivity\n\n The dual-monitor mount holds two displays, one above the other. You can adjust the height of the monitors along the 28" (710 mm) pole, to work in comfort with your two-monitor setup.\n\n Adjust Your Screens to the Ideal Position\n\n The adjustable monitor stand for desks enables smooth, effortless +15/-15 degree tilt & swivel, making it easy to find the perfect viewing angle. It can also rotate a full 360 degrees, giving you the flexibility of portrait or landscape viewing.\n\n Durable Aluminum Design\n\n The dual-monitor stand securely holds your monitors in place while complimenting your office decor with its black & silver aluminum design. The monitor stand supports two monitors, each up to 27" (686 mm) in size & 17.6 lb. (8 kg) in weight.\n\n Easy to Install\n\n The VESA monitor stand is easy to install, featuring quick monitor attachment & removal. It also provides cable management to keep your cables neatly out of sight.\n\n ARMDUOVS is backed by a Star Tech.com 5-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Vertical dual-monitor stand supports two displays up to 27" each (max weight 17.6 lb. (8 kg) per monitor)\n- The height of the monitors can be adjusted along the 28" (710 mm) pole\n- Adjust your screen angle easily with +15&176;/-15&176; tilt & +15&176;/-15&176; swivel Feature Feature Value Maximum weight capacity 16kg Maximum screen size compatibility 68.6 cm (27") Minimum screen size compatibility 33 cm (13") Suitable for Computer monitor Minimum VESA mount 75 x 75 mm Maximum VESA mount 100 x 100 mm Number of displays supported 2 Mounting Freestanding Height adjustment Y Tilt angle range-15
- 15&176; Swivel angle range-15
- 15&176; Angle of rotation 360&176; Product colour Black, Silver Housing material Aluminium, Plastic Ro HS compliance Y Width 115 mm Depth 160 mm Height 940 mm Weight 4.2kg Package width 340 mm Package depth 555 mm Package height 160 mm Package weight 4.8kg Wrench included Y Wrench type Hexagonal wrench Screws included Y Number of screws 34 Number of washers included 8 Number of spacers included 16 User guide Y

...

Mount server, network or telecommunications devices vertically with this 6U wall-mountable rack\n\n This wall-mount bracket provides 6U of storage space to vertically mount your equipment on the wall. The 6U wall-mount rack is EIA-310-D compliant to ensure compatibility with any 19&157; rack-mount equipment, such as your power strips, telecommunication, network & A/V devices.\n\n Save space by mounting your equipment to the wall or other surface\n\n The 6U rack optimizes your working space by mounting equipment to your wall instead of taking up desk space or other surface area. It's perfect for your So Ho (small office, home office) environment, server room or any other location where available space is limited.\n\n Ensure a secure & hassle-free installation\n\n The wall rack is constructed of solid steel to ensure a sturdy & safe mounting solution for your expensive, mission-critical equipment. Also, because the wall mounting holes are positioned 16&157;apart, it exactly matches standard drywall construction framework to ensure simple & secure wall-stud anchoring. Cage nuts & screws are also included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware.\n\n Customize your workspace with versatile installation options\n\n To provide a suitable mounting solution for virtually any surface such as your wall, ceiling or desk, the 6U bracket features separate mounting patterns for both ceilings & walls. This means that you can mount the bracket vertically to your wall or horizontally to your ceiling or under your desk.\n\n If you're looking for a mountable storage solution with fewer rack units, Star Tech.com also offers a 1U wall-mount bracket, a 2U wall-mount bracket, a 3U wall-mount bracket & a 4U wall-mount bracket.\n\n The RK619WALLV is backed by a Star Tech.com lifetime warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Save space in your office or server room by mounting IT or AV equipment vertically to a wall or horizontally under a desk or work bench\n- Hassle-free setup with wall-mount installation holes spaced 16 in. apart, matching standard construction framework\n- Easy equipment installation, with cage nuts & screws included Feature Feature Value Rack capacity 6UType Wall mounted rack Maximum weight capacity 90.7kg Product colour Black Material Steel Frame type Open Design 2-post Cable management N Mounting hole shape Square Castor wheels N Certification Ro HSWidth 505 mm Depth 152 mm Height 282 mm Inner width 450 mm Weight 1.27kg Nuts included Y Number of nuts 16 Screws included Y Number of screws 22 Wall mounting kit Y Manual Y Package width 299 mm Package depth 531 mm Package height 160 mm Package weight 1.5kg Compliance industry standards EIA-310-D, EIA RS310-C ...

Mount server, network or telecommunications devices vertically with this 6U wall-mountable rack\n\n This wall-mount bracket provides 6U of storage space to vertically mount your equipment on the wall. The 6U wall-mount rack is EIA-310-D compliant to ensure compatibility with any 19&157; rack-mount equipment, such as your power strips, telecommunication, network & A/V devices.\n\n Save space by mounting your equipment to the wall or other surface\n\n The 6U rack optimizes your working space by mounting equipment to your wall instead of taking up desk space or other surface area. It's perfect for your So Ho (small office, home office) environment, server room or any other location where available space is limited.\n\n Ensure a secure & hassle-free installation\n\n The wall rack is constructed of solid steel to ensure a sturdy & safe mounting solution for your expensive, mission-critical equipment. Also, because the wall mounting holes are positioned 16&157;apart, it exactly matches standard drywall construction framework to ensure simple & secure wall-stud anchoring. Cage nuts & screws are also included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware.\n\n Customize your workspace with versatile installation options\n\n To provide a suitable mounting solution for virtually any surface such as your wall, ceiling or desk, the 6U bracket features separate mounting patterns for both ceilings & walls. This means that you can mount the bracket vertically to your wall or horizontally to your ceiling or under your desk.\n\n If you're looking for a mountable storage solution with fewer rack units, Star Tech.com also offers a 1U wall-mount bracket, a 2U wall-mount bracket, a 3U wall-mount bracket & a 4U wall-mount bracket.\n\n The RK619WALLV is backed by a Star Tech.com lifetime warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Save space in your office or server room by mounting IT or AV equipment vertically to a wall or horizontally under a desk or work bench\n- Hassle-free setup with wall-mount installation holes spaced 16 in. apart, matching standard construction framework\n- Easy equipment installation, with cage nuts & screws included Feature Feature Value Rack capacity 6UType Wall mounted rack Maximum weight capacity 90.7kg Product colour Black Material Steel Frame type Open Design 2-post Cable management N Mounting hole shape Square Castor wheels N Certification Ro HSWidth 505 mm Depth 152 mm Height 282 mm Inner width 450 mm Weight 1.27kg Nuts included Y Number of nuts 16 Screws included Y Number of screws 22 Wall mounting kit Y Manual Y Package width 299 mm Package depth 531 mm Package height 160 mm Package weight 1.5kg Compliance industry standards EIA-310-D, EIA RS310-C ...