This 1U rack shelf lets you add 16 in. of flat storage space to any EIA-310 compliant server rack or cabinet. The shelf is vented to improve air flow & help lower temperatures in your rack.\n Ensure your equipment is secure\n\n The durable fixed-rack shelf can hold up to 20kg (44 lbs.) of equipment & is constructed using SPCC commercial-grade cold-rolled steel.\n\n Make the most of your available space\n The 1U cantilever shelf lets you optimize your working space by giving you the ability to mount equipment to your rack instead of taking up desk or floor space. It&153;s perfect for your SOHO (small office, home office) environment, server room or any other location with limited space available.\n\n Customize your setup\n You can install the 1U vented rack shelf in your rack at any height, giving you a stable surface for placing equipment that's un-mountable or storing your tools.\n\n The CABSHELF116V is backed by a Star Tech.com lifetime warranty & free lifetime technical support. Feature Feature Value Type Rack shelf Product colour Black Housing material Steel Maximum weight capacity 20kg Rack capacity 1URo HS compliance Y Width 482.6 mm Depth 406.4 mm Height 44.5 mm Weight 3.1kg Quantity per pack 1 pc (s) Package width 425 mm Package depth 500 mm Package height 57 mm Package weight 3.7kg Screws included Y ...

This vented 1U rack panel can mount onto any standard 19-inch 2 or 4-post server rack, to blank out unused rack space. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Professional look\n The blanking panel creates a clean & professional look by covering empty space & visible cables. Adding blanking panels to your server racks offers a tidier appearance for a more organized server room. \n\n Maximize airflow\n The panel features a vented design that enables unobstructed airflow through your rack, to help ensure your equipment is running at an optimal temperature.\n\n Tool-less installation\n For fast & easy installation, this blanking panel features a tool-less design that latches onto a standard 19 in. server rack, saving you time & hassle.\n\n The RKPNLTL1UV is backed by a 2-year Star Tech.com warranty & free lifetime technical support. Feature Feature Value Type Vented blank panel Product colour Black Housing material Plastic, Steel Rack capacity 1URo HS compliance Y Certification CEWidth 44 mm Depth 482 mm Height 22 mm Weight 199 g Quantity per pack 1 pc (s) Package width 55 mm Package depth 542 mm Package height 38 mm Package weight 251 g ...

This vented 1U rack panel can mount onto any standard 19-inch 2 or 4-post server rack, to blank out unused rack space. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Professional look\n The blanking panel creates a clean & professional look by covering empty space & visible cables. Adding blanking panels to your server racks offers a tidier appearance for a more organized server room. \n\n Maximize airflow\n The panel features a vented design that enables unobstructed airflow through your rack, to help ensure your equipment is running at an optimal temperature.\n\n Tool-less installation\n For fast & easy installation, this blanking panel features a tool-less design that latches onto a standard 19 in. server rack, saving you time & hassle.\n\n The RKPNLTL1UV is backed by a 2-year Star Tech.com warranty & free lifetime technical support. Feature Feature Value Type Vented blank panel Product colour Black Housing material Plastic, Steel Rack capacity 1URo HS compliance Y Certification CEWidth 44 mm Depth 482 mm Height 22 mm Weight 199 g Quantity per pack 1 pc (s) Package width 55 mm Package depth 542 mm Package height 38 mm Package weight 251 g ...

This vented 1U rack panel can mount onto any standard 19-inch 2 or 4-post server rack, to blank out unused rack space. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.\n\n Professional look\n The blanking panel creates a clean & professional look by covering empty space & visible cables. Adding blanking panels to your server racks offers a tidier appearance for a more organized server room. \n\n Maximize airflow\n The panel features a vented design that enables unobstructed airflow through your rack, to help ensure your equipment is running at an optimal temperature.\n\n Tool-less installation\n For fast & easy installation, this blanking panel features a tool-less design that latches onto a standard 19 in. server rack, saving you time & hassle.\n\n The RKPNLTL1UV is backed by a 2-year Star Tech.com warranty & free lifetime technical support. Feature Feature Value Type Vented blank panel Product colour Black Housing material Plastic, Steel Rack capacity 1URo HS compliance Y Certification CEWidth 44 mm Depth 482 mm Height 22 mm Weight 199 g Quantity per pack 1 pc (s) Package width 55 mm Package depth 542 mm Package height 38 mm Package weight 251 g ...

This 3-foot vertical cable manager gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 20U or larger. The panel features a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation it's easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n The cable manager uses a D-ring method of cable management to run cables vertically along the side of your rack, neatly guiding them between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Having neatly organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Hassle-free compatibility with your rack\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mount devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER20UD is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Type Cable management panel Product colour Black Housing material Steel Rack capacity 20 U Ro HS compliance Y Width 863.6 mm Depth 50 mm Height 87 mm Weight 760 g Quantity per pack 1 pc (s) Package width 50 mm Package depth 865 mm Package height 63 mm Package weight 1.5kg Screws included N ...

This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the two-panel cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 40U or larger. The panels feature a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation they&153;re easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n The cable manager uses a D-ring method of cable management that neatly guides cables running through it. Having well organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Configurable installation options with two 3 ft. panels\n This versatile cable management system consists of two 3-foot panels, so you can configure each panel as needed to accommodate all of your equipment. You can install the individual panels end to end (top to bottom), so that they span the height of your rack, or on either side or the front & back of your rack to manage cables in multiple locations. \n\n The two-piece cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Hassle-free compatibility with your rack\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER40UD is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Product colour Black Housing material Steel Rack capacity 40 U Ro HS compliance Y Width 1727.2 mm Depth 50 mm Height 87 mm Weight 1.5kg Quantity per pack 2 pc (s) Package width 50 mm Package depth 865 mm Package height 63 mm Package weight 2.1kg Screws included Y ...

This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the two-panel cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 40U or larger. The panels feature a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation they&153;re easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n The cable manager uses a D-ring method of cable management that neatly guides cables running through it. Having well organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Configurable installation options with two 3 ft. panels\n This versatile cable management system consists of two 3-foot panels, so you can configure each panel as needed to accommodate all of your equipment. You can install the individual panels end to end (top to bottom), so that they span the height of your rack, or on either side or the front & back of your rack to manage cables in multiple locations. \n\n The two-piece cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Hassle-free compatibility with your rack\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER40UD is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Product colour Black Housing material Steel Rack capacity 40 U Ro HS compliance Y Width 1727.2 mm Depth 50 mm Height 87 mm Weight 1.5kg Quantity per pack 2 pc (s) Package width 50 mm Package depth 865 mm Package height 63 mm Package weight 2.1kg Screws included Y ...

Organize your cables in any rack or cabinet that&153;s 20U or larger, using this vertical cable management panel\n\n This 3-foot vertical cable manager gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 20U or larger. The panel features a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation, it's easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n\n The vertical cable manager uses a finger-duct method of cable management, which

Includes:: a cover panel that neatly conceals the cables that are running through it. The cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Having neatly organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Hassle-free compatibility with your rack\n\n For maximum compatibility with virtually any server rack, you can install the cable-management panel using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panel through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER20UF is backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Improve the appearance of your rack using a vertical cable manager with finger ducts\n- Promote passive cooling in your rack by organizing cables to improve airflow\n- Make your rack more accessible by organizing your cables for hassle-free maintenance Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 20 U Ro HS compliance Y Width 852.2 mm Depth 100 mm Height 73 mm Weight 2.3kg Quantity per pack 1 pc (s) Package width 160 mm Package depth 945 mm Package height 128 mm Package weight 2.8kg Quick installation guide Y Screws included Y Screw type M5 Number of screws 4 Nuts included Y Number of nuts 2 Cage nuts included Y Number of cage nuts 4

...

Organize your cables in any rack or cabinet that&153;s 20U or larger, using this vertical cable management panel\n\n This 3-foot vertical cable manager gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 20U or larger. The panel features a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation, it's easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n\n The vertical cable manager uses a finger-duct method of cable management, which

Includes:: a cover panel that neatly conceals the cables that are running through it. The cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Having neatly organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Hassle-free compatibility with your rack\n\n For maximum compatibility with virtually any server rack, you can install the cable-management panel using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panel through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER20UF is backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Improve the appearance of your rack using a vertical cable manager with finger ducts\n- Promote passive cooling in your rack by organizing cables to improve airflow\n- Make your rack more accessible by organizing your cables for hassle-free maintenance Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 20 U Ro HS compliance Y Width 852.2 mm Depth 100 mm Height 73 mm Weight 2.3kg Quantity per pack 1 pc (s) Package width 160 mm Package depth 945 mm Package height 128 mm Package weight 2.8kg Quick installation guide Y Screws included Y Screw type M5 Number of screws 4 Nuts included Y Number of nuts 2 Cage nuts included Y Number of cage nuts 4

...

Organize your cables in any rack or cabinet that&153;s 40U or larger, using this vertical cable management panel\n\n This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple & space-efficient way to organize the cables in your server rack. You can attach the two-panel cable manager vertically into your rack, to neatly guide cables between equipment that&153;s mounted at different heights.\n\n The 0U cable manager offers versatile installation options & is compatible with most racks that are 40U or larger. The panels feature a 0U design that doesn&153;t take up any mounting space, & with simple tool-less installation, they&153;re easy to attach or reposition as necessary.\n\n Improve the appearance & accessibility of your rack\n\n The vertical cable manager uses a finger-duct method of cable management, which

Includes:: a cover panel that neatly conceals the cables that are running through it.\n\n Having well organized & routed cables not only improves the appearance & accessibility of your rack, it also makes it easier for you to install, access & maintain rack components.\n\n Configurable installation options\n\n This versatile cable management system consists of two 3-foot panels, so you can configure each panel as needed to accommodate all of your equipment. You can install the individual panels end to end (top to bottom) so that they span the height of your rack, or on either side or the front & back of your rack to manage cables in multiple locations. \n\n The two-piece cable manager runs vertically along the side of your rack, to neatly guide cables between equipment that&153;s mounted at different heights. This provides a tidy & well-organized way to run cables from devices mounted toward the bottom of your rack to other devices mounted near the top, without leaving a mess of cables hanging in between.\n\n Hassle-free compatibility with your rack\n\n For maximum compatibility with virtually any server rack, you can install the cable-management panels using mounting holes that are commonly found on most rack equipment. The tool-less mounting method attaches the cable management panel to the keyhole-shaped mounting holes that are built into your rack.\n\n The horizontal mounting rail method attaches the cable management panel to the horizontal mounting rails that run along the side of your rack.\n\n For racks that don't support these installation methods, you can also mount the cable management panels through other means, such as using the non-standardized holes found on your rack walls & enclosures, or the rack units on equipment mounting rails.\n\n Protect your equipment\n\n Routing your cables through a panel reduces the tension that's often put on cables. This prevents cable damage or connection loss, & reduces strain on equipment ports, preventing damage to your expensive rack-mounted devices.\n\n Properly routing cables also improves airflow, which passively cools devices stored in your rack, helping to keep your equipment running at optimal temperatures to reduce the probability of damage caused by your rack overheating.\n\n The CMVER40UF is backed by a Star Tech.com 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- Improve the appearance of your rack using a vertical cable manager with finger ducts\n- Promote passive cooling in your rack by organizing cables to improve airflow\n- Make your rack more accessible by organizing your cables for hassle-free maintenance & scalability Feature Feature Value Type Cable management panel Product colour Black Housing material Plastic, Steel Rack capacity 40 U Ro HS compliance Y Certification REACHWidth 100 mm Depth 1704 mm Height 73 mm Weight 1.7kg Quantity per pack 2 pc (s) Package width 234 mm Package depth 351 mm Package height 171 mm Package weight 2.4kg Quick installation guide Y Screws included Y Number of screws 8 Nuts included Y Number of nuts 8

...