The RK619WALLOH 6U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 6U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. The Star Tech.com Advantage
- Hinged design swings open for simple installation & maintenance of equipment.
- Unit is shipped with all the hardware necessary to install components into the rack.
- Open-frame rack design allows for maximum airflow, helping to keep your equipment operating temperatures cooler for smoother operation & longer lifespan.


...

This 8U Open Frame Wall Mount Equipment Rack is a high quality, low cost relay rack that is easy to assemble & install into any environment. The rack can be wallmounted or installed as a free standing storage solution. Able to accomodate common data, audio-video & telecom equipment, the open rack offers a depth of 12in; the wall mounts are positioned 16in apart (center to center), making it suitable for mounting on virtually any wall surface, based on North American wall frame stud spacing standards. ...

The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. Backed by a Star Tech.com Lifetime warranty. The Star Tech.com Advantage Sidemount wall configuration allows for a much greater mounting depth than typical wallmount racks, to accommodate nearly any equipment Sidemount design provides easy front & back access to equipment for ease of setup & troubleshooting Open-frame rack design allows for maximum airflow, helping to keep your equipment operating temperatures cooler for smoother operation & longer lifespan Features
- Wall mount holes are 16" center-to-center, for mounting to any standard wooden studs (easily mounts to concrete or steel as well)
- Package

Includes:: all necessary screws/nuts for mounting rack equipment
- Mounts equipment facing perpendicular to the wall
- Sturdy SPCC cold-rolled steel construction
- Open frame design for optimum airflow
- Ships fully assembled & ready to use Applications
- Perfect for installing network switches out of the way & high up on a wall in a branch office, warehouse, or superstore location
- Ideal for small & medium businesses requiring small rack solutions dispersed throughout the organization
- Mount Audio/ Video broadcast or distribution components










...

The RK819WALLOH 8U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. The Star Tech.com Advantage
- Hinged design swings open for simple installation & maintenance of equipment.
- Unit is shipped with all the hardware necessary to install components into the rack.
- Open-frame rack design allows for maximum airflow, helping to keep your equipment operating temperatures cooler for smoother operation & longer lifespan.


...

The RKLCDBKT Universal Swivel VESA LCD Mounting Bracket for 19in Rack or Cabinet lets you mount almost any retail LCD or touch screen into a server rack/cabinet, with tilt & swivel motion for maximum visible range. Hinged on one of the rail mounts, the LCD bracket can be released to swing out from the rack, as well as offering vertical tilt allowing for perfect placement of your LCD panel with minimal adjustment. Constructed from solid cold pressed steel (SPCC), the LCD mounting bracket is designed to support 75mm & 100mm VESA mounted panels, & meets ANSI/EIA RS-310-D rack mounting standards. A unique adjustable design that enables mounting into the cabinet at various depths
- allows the rack/cabinet door to be closed if necessary. A versatile option, the LCD mounting bracket also supports wall-mounted installations by reversing the bracket or attaching to a wall mounted bracket or rack.
...

The IC485SGB rs 232 to rs 485/RS422 Converter is a cost-effective solution for trouble-free serial data transmission. This 2-in-1 converter converts RS232C to either the RS-485 or RS-422 interface, & is DCE/DTE mode selectable at the flip of a switch, making it easy to change line signals! The RS232 serial converter offers several convenient features including mode selection, point-to-point multidrop configuration & RS 485/422 monitor mode, & is constructed of high grade plastic for enhanced durability. The converter supports connections of up to 4000 ft, with data transfer rates of up to 1MB/sec. Suitable for a broad range of operating environments, this adapter

Includes:: an optional 9V power adapter or can draw power on its own, & is backed by Star Tech.com′s 1-year warranty & FREE lifetime tech support.

...

The RS232EXTC1GB Serial over Cat 5 Extender means that you can increase the distance of your RS232 Serial connection by up to 1000 meters (3300 feet), giving you the ability to connect serial peripheral devices up to a kilometer away from your system
- an incredible 65x greater than normal RS232 serial cable length restrictions would permit.\n\n The Extender is a cost-effective serial extension solution & completely hardware-based, eliminating the need to install additional software, allowing for a completely plug & play installation. The hardware can be setup in minutes, using existing or new Cat 5 or better Ethernet cabling.\n\n Perfect for use in industrial monitoring & control, POS, security, medical, & traffic flow applications, the RS232 Serial over Cat 5 extender maintains the RS232 standard with support for data transfer rates of up to 230 Kbps.\n\n Backed by a Star Tech.com 2-year warranty & free lifetime technical support. Feature Feature Value Type Network transmitter Maximum transfer distance 1000 m Cable types supported Cat 5 Ethernet LAN (RJ-45) ports 2VGA (D-Sub) ports quantity 2 Product colour Silver Ro HS compliance YAC input voltage 240 VInput current 0.055 AOutput current 0.3 AOperating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)0
- 85 &176;COperating relative humidity (H-H)0
- 95% Width 34 mm Depth 92 mm Height 22 mm Weight 65 g Manual Y Package width 2.24 mm Package depth 12.4 mm Package height 5.43 mm Package weight 1kg



...

The DB92422 DB 9 to Terminal Block adapter converts an RS-422 or RS-485 DB 9 male serial connector to a terminal block connector. The 5-pin 3.5mm Terminal Block connector supports screw-type wiring to meet the standard for industrial wiring applications. Backed by Lifetime warranty. ...

Convert an RS-422 or RS-485 DB 9 male serial connector to a terminal block connector\n\n The DB92422 DB 9 to Terminal Block adapter converts an RS-422 or RS-485 DB 9 male serial connector to a terminal block connector.\n\n The 5-pin 3.5mm Terminal Block connector supports screw-type wiring to meet the standard for industrial wiring applications.\n\n Backed by Lifetime warranty.\n\n The Star Tech.com Advantage\n\n- Converts a DB9 male RS422/485 port to a 5 pin terminal block\n- Supports four wire RS422, RS485, & two wire RS485 modes\n- Supports 3.5mm 5 pin terminal blocks Feature Feature Value Connector (s)RS422/RS485 DB9 Product colour Black Weight 20 g Package width 34 mm Package depth 101 mm Package height 137 mm Package weight 30 g Dimensions (Wx Dx H)34.2 x 48.9 x 15.4 mm ...

Convert an RS-422 or RS-485 DB 9 male serial connector to a terminal block connector\n\n The DB92422 DB 9 to Terminal Block adapter converts an RS-422 or RS-485 DB 9 male serial connector to a terminal block connector.\n\n The 5-pin 3.5mm Terminal Block connector supports screw-type wiring to meet the standard for industrial wiring applications.\n\n Backed by Lifetime warranty.\n\n The Star Tech.com Advantage\n\n- Converts a DB9 male RS422/485 port to a 5 pin terminal block\n- Supports four wire RS422, RS485, & two wire RS485 modes\n- Supports 3.5mm 5 pin terminal blocks Feature Feature Value Connector (s)RS422/RS485 DB9 Product colour Black Weight 20 g Package width 34 mm Package depth 101 mm Package height 137 mm Package weight 30 g Dimensions (Wx Dx H)34.2 x 48.9 x 15.4 mm ...