The DGS-1210 Series Smart Switches is the latest generation of D-Link Smart Switches featuring D-Link Green 3.0 technology. The series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 61. By offering multiple management options, the Smart Switches allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 Series Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Smart Switches

Includes:: a range of affordable Po E-enable switches for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1210-08P1 is a 8-port Smart Po E Switch that provides 8 Po E-enabled ports that can supply power of up to 15.4 W each. Whereas the DGS-1210-24P1 is a 24-port Smart Po E Switch that provides 12 Po E-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Easy Management The D-Link Smart Switches series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC′s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. During the first installation, the D-Link Network Assistant 2 will automatically discover all D-Link Smart Switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. The D-Link Network Assistant 1′s important management commands, such as downloading firmware or a configuration file, offer a sophisticated method of batch operations for multiple switches. Energy Saving DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. Auto Surveillance VLAN & Voice VLAN The process of setting up IP surveillance & Vo IP on a network is automated with the D-Link Smart Switches. Auto Surveillance VLAN (ASV) consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their highest levels. Similarly, the Auto Voice VLAN guarantees clear audio quality & efficient transmission for all voice communication. Exclusive Layer 2 Features Equipped with a complete lineup of L2 features, the DGS-1210 Series switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature is designed primarily for administrators & customer service representatives, & can rapidly discover the type of error & determine the cable quality. Secure your Network D-Link′s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

...

The DGS-1210-52 Web Smart switch with advanced management functions including SNMP, Web Management, Smart Console Utility, & compact command line provides a complete & affordable solution for small & medium businesses.\n\n The DGS-1210 Series is the latest generation of D-Link Web Smart Switches featuring D-Link Green 3.0 technology. The series complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensure your network remains protected after the upgrade from IPv 4 to IPv 6*. By offering multiple management options, the DGS-1210 series allows quick deployment, infrastructure expansion, & seamless function upgrades. Targeting small & medium-sized businesses, the DGS-1210 Web Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership.\n\n Energy Saving\n DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom time profiles. The time profiles can also be applied to the Po E switch so that unnecessary power consumption can be saved during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.\n\n Easy Management\n The D-Link Web Smart Switch series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC&153;s operating system. In the first installation, the Smart Console Utility will automatically discover all D-Link Smart switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. Important management commands, such as download firmware or configuration file, offer a sophisticated method of batch operations for multiple switches.\n\n Auto Surveillance VLAN & Voice VLAN\n The D-Link Web Smart series automates the process of setting up IP surveillance & Vo IP devices on a network. Auto Surveillance VLAN consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic are at their highest levels. Similarly, the Auto Voice VLAN guarantees clear quality & efficient transmission for all voice communication.\n\n Extensive Layer 2 Features\n Equipped with a complete line-up of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators & customer service representatives, can rapidly discover the type of error & determine the cable quality.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L2 Quality of Service (Qo S) support Y Web-based management YARP inspection Y Configuring Location Settings (CLI)YMIB support Y Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP module slots quantity 2 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x 10G support N Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Auto MDI/MDI-XYSpanning tree protocol Y Head-of-line (HOL) blocking Y Auto-negotiation YMAC address table 8000 entries Switching capacity 20 Gbit/s Forwarding rate 14.88 Mpps Store-&-forward Y Jumbo frames support Y Jumbo frames 9216 Packet buffer memory 0.512 MBAccess Control List (ACL)YIGMP snooping YMAC address filtering Y Loop protection Y Multicast support Y Rack mounting Y Stackable Y Product colour Black, Grey Form factor 1UMean time between failures (MTBF)205249 h AC input voltage 100
- 240 VAC input frequency 50/60 Hz Power over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 95% Storage relative humidity (H-H)5
- 95% Heat dissipation 373.96 BTU/h Width 280 mm Depth 126 mm Height 44 mm Weight 980 g




...

The DGS-1210-52 Web Smart switch with advanced management functions including SNMP, Web Management, Smart Console Utility, & compact command line provides a complete & affordable solution for small & medium businesses.\n\n The DGS-1210 Series is the latest generation of D-Link Web Smart Switches featuring D-Link Green 3.0 technology. The series complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensure your network remains protected after the upgrade from IPv 4 to IPv 6*. By offering multiple management options, the DGS-1210 series allows quick deployment, infrastructure expansion, & seamless function upgrades. Targeting small & medium-sized businesses, the DGS-1210 Web Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership.\n\n Energy Saving\n DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom time profiles. The time profiles can also be applied to the Po E switch so that unnecessary power consumption can be saved during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.\n\n Easy Management\n The D-Link Web Smart Switch series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC&153;s operating system. In the first installation, the Smart Console Utility will automatically discover all D-Link Smart switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. Important management commands, such as download firmware or configuration file, offer a sophisticated method of batch operations for multiple switches.\n\n Auto Surveillance VLAN & Voice VLAN\n The D-Link Web Smart series automates the process of setting up IP surveillance & Vo IP devices on a network. Auto Surveillance VLAN consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic are at their highest levels. Similarly, the Auto Voice VLAN guarantees clear quality & efficient transmission for all voice communication.\n\n Extensive Layer 2 Features\n Equipped with a complete line-up of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators & customer service representatives, can rapidly discover the type of error & determine the cable quality.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L2 Quality of Service (Qo S) support Y Web-based management YARP inspection Y Configuring Location Settings (CLI)YMIB support Y Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP module slots quantity 2 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x 10G support N Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Auto MDI/MDI-XYSpanning tree protocol Y Head-of-line (HOL) blocking Y Auto-negotiation YMAC address table 8000 entries Switching capacity 20 Gbit/s Forwarding rate 14.88 Mpps Store-&-forward Y Jumbo frames support Y Jumbo frames 9216 Packet buffer memory 0.512 MBAccess Control List (ACL)YIGMP snooping YMAC address filtering Y Loop protection Y Multicast support Y Rack mounting Y Stackable Y Product colour Black, Grey Form factor 1UMean time between failures (MTBF)205249 h AC input voltage 100
- 240 VAC input frequency 50/60 Hz Power over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 95% Storage relative humidity (H-H)5
- 95% Heat dissipation 373.96 BTU/h Width 280 mm Depth 126 mm Height 44 mm Weight 980 g




...

The DGS-1210-52 Web Smart switch with advanced management functions including SNMP, Web Management, Smart Console Utility, & compact command line provides a complete & affordable solution for small & medium businesses.\n\n The DGS-1210 Series is the latest generation of D-Link Web Smart Switches featuring D-Link Green 3.0 technology. The series complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensure your network remains protected after the upgrade from IPv 4 to IPv 6*. By offering multiple management options, the DGS-1210 series allows quick deployment, infrastructure expansion, & seamless function upgrades. Targeting small & medium-sized businesses, the DGS-1210 Web Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership.\n\n Energy Saving\n DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom time profiles. The time profiles can also be applied to the Po E switch so that unnecessary power consumption can be saved during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.\n\n Easy Management\n The D-Link Web Smart Switch series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC&153;s operating system. In the first installation, the Smart Console Utility will automatically discover all D-Link Smart switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. Important management commands, such as download firmware or configuration file, offer a sophisticated method of batch operations for multiple switches.\n\n Auto Surveillance VLAN & Voice VLAN\n The D-Link Web Smart series automates the process of setting up IP surveillance & Vo IP devices on a network. Auto Surveillance VLAN consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic are at their highest levels. Similarly, the Auto Voice VLAN guarantees clear quality & efficient transmission for all voice communication.\n\n Extensive Layer 2 Features\n Equipped with a complete line-up of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators & customer service representatives, can rapidly discover the type of error & determine the cable quality.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L2 Quality of Service (Qo S) support Y Web-based management YARP inspection Y Configuring Location Settings (CLI)YMIB support Y Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP module slots quantity 2 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x 10G support N Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Auto MDI/MDI-XYSpanning tree protocol Y Head-of-line (HOL) blocking Y Auto-negotiation YMAC address table 8000 entries Switching capacity 20 Gbit/s Forwarding rate 14.88 Mpps Store-&-forward Y Jumbo frames support Y Jumbo frames 9216 Packet buffer memory 0.512 MBAccess Control List (ACL)YIGMP snooping YMAC address filtering Y Loop protection Y Multicast support Y Rack mounting Y Stackable Y Product colour Black, Grey Form factor 1UMean time between failures (MTBF)205249 h AC input voltage 100
- 240 VAC input frequency 50/60 Hz Power over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 95% Storage relative humidity (H-H)5
- 95% Heat dissipation 373.96 BTU/h Width 280 mm Depth 126 mm Height 44 mm Weight 980 g




...

The DGS-1210-52 Web Smart switch with advanced management functions including SNMP, Web Management, Smart Console Utility, & compact command line provides a complete & affordable solution for small & medium businesses.\n\n The DGS-1210 Series is the latest generation of D-Link Web Smart Switches featuring D-Link Green 3.0 technology. The series complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensure your network remains protected after the upgrade from IPv 4 to IPv 6*. By offering multiple management options, the DGS-1210 series allows quick deployment, infrastructure expansion, & seamless function upgrades. Targeting small & medium-sized businesses, the DGS-1210 Web Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership.\n\n Energy Saving\n DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom time profiles. The time profiles can also be applied to the Po E switch so that unnecessary power consumption can be saved during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.\n\n Easy Management\n The D-Link Web Smart Switch series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC&153;s operating system. In the first installation, the Smart Console Utility will automatically discover all D-Link Smart switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. Important management commands, such as download firmware or configuration file, offer a sophisticated method of batch operations for multiple switches.\n\n Auto Surveillance VLAN & Voice VLAN\n The D-Link Web Smart series automates the process of setting up IP surveillance & Vo IP devices on a network. Auto Surveillance VLAN consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic are at their highest levels. Similarly, the Auto Voice VLAN guarantees clear quality & efficient transmission for all voice communication.\n\n Extensive Layer 2 Features\n Equipped with a complete line-up of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators & customer service representatives, can rapidly discover the type of error & determine the cable quality.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L2 Quality of Service (Qo S) support Y Web-based management YARP inspection Y Configuring Location Settings (CLI)YMIB support Y Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP module slots quantity 2 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x 10G support N Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Auto MDI/MDI-XYSpanning tree protocol Y Head-of-line (HOL) blocking Y Auto-negotiation YMAC address table 8000 entries Switching capacity 20 Gbit/s Forwarding rate 14.88 Mpps Store-&-forward Y Jumbo frames support Y Jumbo frames 9216 Packet buffer memory 0.512 MBAccess Control List (ACL)YIGMP snooping YMAC address filtering Y Loop protection Y Multicast support Y Rack mounting Y Stackable Y Product colour Black, Grey Form factor 1UMean time between failures (MTBF)205249 h AC input voltage 100
- 240 VAC input frequency 50/60 Hz Power over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 95% Storage relative humidity (H-H)5
- 95% Heat dissipation 373.96 BTU/h Width 280 mm Depth 126 mm Height 44 mm Weight 980 g




...

Smart Managed with a Plus\n With increased Po E output, advanced Layer 2 management features, & Layer 3 static routing, D' Link&153;s DGS'1210 Smart+ Managed Gigabit Switches provide a cost'efficient & flexible solution for expanding any business network.\n\n Advanced Layer 2 Management with Layer 3 Static Routing\n The DGS-1210 Smart+ family has advanced network management options, accessible via Compact CLI or the Web-based UI, that equip your business with network capabilities such as VLANs, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routing, dual software images, & dual configuration files. \n\n With powerful security features like IGMP snooping, access control lists, port security, & the unique D-Link Safeguard Engine that protects your network against malicious denial-of-service attacks from broadcast, multicast & unicast flooding, the DGS-1210 Smart+ family is a versatile solution for access-edge network environments.\n\n Fibre Uplinks\n Use fibre uplinks to connect across longer distances, like factory lines & university campuses, using lightweight, secure, & energy'efficient fibre optic cabling that&153;s immune to interference & which has access to higher throughput to protect the future demands of your business network.\n\n Po E & Po E+, with budgets up to 370W\n The DGS-1210 Smart+ Series

Includes:: a range of high power budget Po E-enabled switches for business looking to power larger deployments of Vo IP phones, wireless access points or network cameras.\n\n Free Network Design & Management Software\n D-Link&153;s free Network Assistant (DNA) displays all connected devices & speeds up the first time configuration. The free D-View 7 Network Management System comes with a license for 25 nodes & 2 probes & full access to the management tools. Optional upgrade licenses allow you to broaden your network & analysis.\n\n Smart Energy' Saving Design\n D-Link Green technology enables the DGS-1210 Smart+ series to save power without any sacrifices. The majority of the family utilises a fanless design, otherwise they feature a smart fan that powers on above a certain temperature. All come with advanced silicon technology which saves up to 73% of energy compared to a normal switch.\n\n Surveillance Mode\n Select Surveillance Mode in the Web UI to take advantage of easy'to'use surveillance features which enable you to manage your surveillance network effortlessly. It automatically detects your security devices & segments them into a dedicated Auto Surveillance VLAN to handle video surveillance traffic securely & efficiently.\n\n- Layer 2 management & security with Layer 3 capabilities\n- Compact Comm&-Line Interface (CLI) & web-based User-Interface\n- Static Routing & MSTP\n- Po E options up to 370W power budget\n- Dual image & config Feature Feature Value Switch type Managed Switch layer L2 Quality of Service (Qo S) support Y Web-based management Y Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 8SFP module slots quantity 2 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x 10G support N Copper ethernet cabling technology 10BASE-T, 100BASE-T, 1000BASE-TCable types supported Cat 5, Cat 5e Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Auto MDI/MDI-XYMAC address table 8000 entries Switching capacity 20 Gbit/s Forwarding rate 14.88 Mpps Store-&-forward Y Packet buffer memory 0.512 MBAccess Control List (ACL)YMAC address filtering Y Multicast support Y Rack mounting Y Stackable Y Product colour Black Form factor 1ULED indicators Y Certification EMI: CE Class A, VCCI Class A, FCC Class A, BSMI, CCCMean time between failures (MTBF)729258 h Power consumption (max)80.6 WPower over Ethernet (Po E)YTotal Power over Ethernet (Po E) budget 65 WOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 373.96 BTU/h Width 280 mm Depth 126 mm Height 44 mm Weight 950 g





...

The DGS-1210-16 is part of D-Link′s 3rd generation of Web Smart Switches that integrates advanced management & security functions for performance & scalability. Featuring an innovative fanless design that ensures quiet operation & a longer life span, the DGS-1210-16 provides a complete & affordable solution for small & medium businesses (SMB). Seamless Integration The DGS-1210-16

Includes:: 16 10/100/1000 Mbps ports capable of connecting to existing Cat.5 twisted-pair cables. in addition, the last four ports of the DGS-1210 Series combine SFP & copper connectivity into one port & therefore provide a flexible solution for server connections via fiber interface. Using the default presets, the administrator can quickly set up the switch without worrying about reconfiguring any settings & providing easy access for the user. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. Qo S & bandwidth control The switch is perfect for deployment in a Vo IP environment, as it supports Auto Voice VLAN & Differentiated Services Code Point (DSCP) Qo S for Vo IP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN & by doing so enhance the Vo IP service. With a higher priority & individual VLAN, this feature guarantees the quality & security of Vo IP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or might have high priority. Secure your Network D-Link′s unique Safeguard Engine function protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1X port-based authentication, allowing the network to be authenticated through an external RADIUS server. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network. The DGS-1210-16

Includes:: ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames on a LAN, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. Versatile Management The DGS-1210-16 provides a Smart Console utility & a web-based management interface that enables administrators to remotely control their network down to the port level. The Smart Console easily allows customers to discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC & it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user′s PC are displayed on screen for instant access. This allows extensive switch configuration settings & basic configuration of discovered devices such as password changes & firmware upgrades. The DGS-1210 Series also supports D-View 6.0, D-Link′s own Network Management System, & Compact Command Line Interface (CLI) through Telnet. CLI management of the switches is possible via Telnet. This makes the adjustment of basic settings like password changes or firmware & configuration file uploads possible. D-Link Green The DGS-1210-16 implements D-Link Green, an innovative concept that provides energy savings whitout sacrificing operational performance or functionality. The switch reacts when devices attached to it are turned off, by placing the corresponding port in a standby mode that requires less power. It also automatically detects the length of connected cables, which allows it to cut power usage on shorter cable connections up to 20 m. D-Link Green certification ensures that the switch complies with the Ro HS (Restriction of Hazardous Substances) & WEEE (Waste Electrical & Electronic Equipment) directives. Ro HS restrict the use of specific hazardous materials during the manufacture of electrical & electronic goods, while WEEE applies standards for proper disposal & recyclable packaging to help reduce wastage. -Third generation design, with enhanced management & security functions. -Fanless design ideal to be used in open offices. -Power-saving D-Link Green technology now in its 2nd generation. -Solid security with 802.1X authentication & IP/MAC based Access Control Lists (ACL). -Malicious traffic & performance degradation prevention with D-Link Safeguard Engine™. -Auto Voice VLAN for the automatic prioritisation of digital voice traffic. -Quality of service (Qo S) & bandwidth control (down to 64 kbps). -High Reliability with Loopback Detection (LBD) & cable diagnostics. -Simple Web based management. -Smart Console utility for the joint management of several switches.



...

The DGS-1210-24 is part of D-Link′s 3rd generation of Web Smart Switches that integrates advanced management & security functions for performance & scalability. Featuring an innovative fanless design that ensures quiet operation & a longer life span, the DGS-1210-24 provides a complete & affordable solution for small & medium businesses (SMB). Seamless Integration The DGS-1210-24

Includes:: 24 10/100/1000 Mbps ports capable of connecting to existing Cat.5 twisted-pair cables. in addition, the last four ports of the DGS-1210-24 combine SFP & copper connectivity into one port & therefore provide a flexible solution for server connections via fiber interface. Using the default presets, the administrator can quickly set up the switch without worrying about reconfiguring any settings & providing easy access for the user. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. Qo S & bandwidth control The switch is perfect for deployment in a Vo IP environment, as it supports Auto Voice VLAN & Differentiated Services Code Point (DSCP) Qo S for Vo IP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN & by doing so enhance the Vo IP service. With a higher priority & individual VLAN, this feature guarantees the quality & security of Vo IP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or might have high priority. Secure your Network D-Link′s unique Safeguard Engine function protects the switch against traffic flooding caused by virus attacks. The switch also supports 802.1X port-based authentication, allowing the network to be authenticated through an external RADIUS server. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network. The DGS-1210-24

Includes:: ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames on a LAN, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. Versatile Management The DGS-1210-24 provides a Smart Console utility & a web-based management interface that enables administrators to remotely control their network down to the port level. The Smart Console easily allows customers to discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC & it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user′s PC are displayed on screen for instant access. This allows extensive switch configuration settings & basic configuration of discovered devices such as password changes & firmware upgrades. The DGS-1210-24 also supports D-View 6.0, D-Link′s own Network Management System, & Compact Command Line Interface (CLI) through Telnet. CLI management of the switches is possible via Telnet. This makes the adjustment of basic settings like password changes or firmware & configuration file uploads possible. D-Link Green The DGS-1210-24 implements D-Link Green, an innovative concept that provides energy savings whitout sacrificing operational performance or functionality. The switch reacts when devices attached to it are turned off, by placing the corresponding port in a standby mode that requires less power. It also automatically detects the length of connected cables, which allows it to cut power usage on shorter cable connections up to 20 m. D-Link Green certification ensures that the switch complies with the Ro HS (Restriction of Hazardous Substances) & WEEE (Waste Electrical & Electronic Equipment) directives. Ro HS restrict the use of specific hazardous materials during the manufacture of electrical & electronic goods, while WEEE applies standards for proper disposal & recyclable packaging to help reduce wastage. -Third generation design, with enhanced management & security functions. -Fanless design ideal to be used in open offices. -Power-saving D-Link Green technology now in its 2nd generation. -Solid security with 802.1X authentication & IP/MAC based Access Control Lists (ACL). -Malicious traffic & performance degradation prevention with D-Link Safeguard Engine™. -Auto Voice VLAN for the automatic prioritisation of digital voice traffic. -Quality of service (Qo S) & bandwidth control (down to 64 kbps). -High Reliability with Loopback Detection (LBD) & cable diagnostics. -Simple Web based management. -Smart Console utility for the joint management of several switches.



...

The DGS-1210 Series Smart Switches is the latest generation of D-Link Smart Switches featuring D-Link Green 3.0 technology. The series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 61. By offering multiple management options, the Smart Switches allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 Series Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Smart Switches

Includes:: a range of affordable Po E-enable switches for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1210-08P1 is a 8-port Smart Po E Switch that provides 8 Po E-enabled ports that can supply power of up to 15.4 W each. Whereas the DGS-1210-24P1 is a 24-port Smart Po E Switch that provides 12 Po E-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Easy Management The D-Link Smart Switches series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC′s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. During the first installation, the D-Link Network Assistant 2 will automatically discover all D-Link Smart Switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. The D-Link Network Assistant 1′s important management commands, such as downloading firmware or a configuration file, offer a sophisticated method of batch operations for multiple switches. Energy Saving DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. Auto Surveillance VLAN & Voice VLAN The process of setting up IP surveillance & Vo IP on a network is automated with the D-Link Smart Switches. Auto Surveillance VLAN (ASV) consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their highest levels. Similarly, the Auto Voice VLAN guarantees clear audio quality & efficient transmission for all voice communication. Exclusive Layer 2 Features Equipped with a complete lineup of L2 features, the DGS-1210 Series switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature is designed primarily for administrators & customer service representatives, & can rapidly discover the type of error & determine the cable quality. Secure your Network D-Link′s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

...

The DGS-1210 Series is the latest generation of D-Link Web Smart Switches featuring D-Link Green 3.0 technology. The series complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensure your network remains protected after the upgrade from IPv 4 to IPv 61. By offering multiple management options, the DGS-1210 series allows quick deployment, infrastructure expansion, & seamless function upgrades. Targeting small & mediumsized businesses, the DGS-1210 Web Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership. The new DGS-1210-28P is a Po E Web Smart Switch that provides 24 10/100/1000 Base-T Po E ports with 4 Gigabit SFP ports. In addition to IEEE 802.3af compliance, ports 1-4 provide up to 30 watts of power output following IEEE 802.3at. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS- 1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom time profiles. The time profiles can also be applied to the Po E switch so that unnecessary power consumption can be saved during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. The D-Link Web Smart Switch series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC′s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. In the first installation, the Smart Console Utility will automatically discover all D-Link Smart switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. Important management commands, such as download firmware or configuration file, offer a sophisticated method of batch operations for multiple switches. The D-link Web Smart series automates the process of setting up IP surveillance & Vo IP devices on a network. Auto Surveillance VLAN consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic are at their highest levels. Similarly, the Auto Voice VLAN guarantees clear quality & efficient transmission for all voice communication. Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature designed primarily for adminstrators & customer service representatives, can rapidly discover the type of error & determine the cable quality. D-Link′s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. ...