More From Contributor

£12.85
- Plug & Play operation
- 8 Fast Ethernet ports
- Non-blocking architecture: simultaneous full speed on all ports
- Fanless,


...
Available
£13.81
'- Plug & Play operation\n- 8 Fast Ethernet ports\n- Non-blocking architecture: simultaneous full speed on all ports\n- Fanless, silent operation to fit in any environment\n- Quality of Service (Qo S) queues for traffic prioritisation\n- Solidly built with metal housing\n- D-Link Green&132;&162; technology, saves energy & increases the product&153;s lifespan\n\n D-Link&153;s DES-108 Fast Ethernet switch provides a cost-effective way for SOHO & SMB to create a small network & connect computers, wireless Access Points, IP cameras, network printers & other Ethernet devices quickly & easily without complicated configurations. This switch comes with 8 Fast Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Its fanless design makes the DES-108 completely silent so it is ideal for offices, libraries or meeting rooms.\n\n Robust design\n\n The DES-108 is designed with durability & performance in mind. The sturdy metal housing will protect it against accidental harm, while helping to dissipate heat & to reduce stress on internal components. The visible LEDs allow for an easy reading of each port status, helping to troubleshoot connectivity problems. For a convenient placement, this switch comes with a wall mounting kit & a slot for a Kensington security lock to protect it from theft.\n\n Qo S (Quality of Service)\n\n Despite being an unmanaged, Plug & Play switch, the DES-108 is able to classify network traffic by assessing the 802.1p field in the Ethernet frames, & forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice & data traffic without delays or loss of quality.\n\n Power-saving technology\n\n The DES-108 is part of D-Link Green&132;&162;, D-Link&153;s eco-friendly technology, providing energy savings, reduced power consumption, & a longer product lifespan without sacrificing operational performance or functionality. This switch implements the 802.3az Energy Efficient Ethernet (EEE) standard, which can save a substantial amount of energy by detecting the port status, putting them in low-power, st&-by mode when no network traffic is detected. This helps businesses to save money by reducing their electricity bills with no compromise on performance. Feature Feature Value Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 8 Power connector DC-in jack Networking standards IEEE 802.1p, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x 10G support N Copper ethernet cabling technology 100BASE-TX, 10BASE-TFull duplex Y Flow control support Y Auto MDI/MDI-XYMAC address table 1000 entries Switching capacity 1.6 Gbit/s Supported data transfer rates 10/100 Mbps Store-&-forward Y Maximum data transfer rate 0.1 Gbit/s Jumbo frames support Y Packet buffer memory 0.768 MBMAC address filtering Y Rack mounting N Product colour Black Housing material Metal LED indicators Link, Power Certification Ro HS, FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, c UL, CBMean time between failures (MTBF)511323 h Input current 1 APower consumption (typical)2.1 WOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Data transfer rate 200 Mbit/s Dimensions (Wx Dx H)162 x 102 x 28 mm Input voltage 5 V



...
Available
£45.90
D-Link DES-1100-16/24 is the latest series of Easy Smart Switches. Equipped with 16 or 24 10/100 Mbps ports, the series integrates basic configurable functions that provide performance & scalability. With easy to use management interface via PC Utility or Web Browser, these Easy Smart series help customers to quickly & easily deploy their network. The DES-1100 Series provides a complete & affordable solution for Small & Medium Business or communities without IT staff. They are suitable for Enterprise deployment, such as branch offices & meeting rooms that require simple management. Management options for the switches include Web Management & Smart Console Utility. The series also supports Layer 2 features such as Port Mirroring, Statistics & IGMP Snooping to optimize performance for multicast applications. Both models come with an innovative fanless design in compact 11"metal cases. Resilience/ Performance Enhancement Equipped with a complete lineup of L2 features, these switches include IGMP Snooping & Port Mirroring. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shuts down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. For Quality of Service (Qo S), the switches support 802.1p. This standard is a mechanism that allows real-time traffic classification into 8 priority levels mapped to 4 queues. Traffic & Security Features The DES-1100 series supports 802.1Q VLAN & Portbased VLAN, for traffic segregation. The bandwidth control feature allows network administrators to define the throughput levels for each port in order to manage bandwidth. It also provides fine granularity to define the ingress/egress traffic limits down to 512 kbps segments. The Storm Control feature allows detection when broadcast, multicast or unknown unicast traffic hit the definable threshold. The switch will start blocking or discarding packets which would otherwise ?flood′ the network. The blocked port will be activated only when the broadcast or multicast traffic falls below the defined threshold. Port Mirroring helps administrators facilitate traffic diagnostics or track switch performance & alter when necessary. Versatile Management The Easy Smart Switches supports an intuitive Smart Console utility & a web-based management interface that enables administrators to remotely control their network down to the port level. The Smart Console easily allows customers to discover multiple D-Link Easy Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC & it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user′s local PC are displayed on screen for instant access. This enables discovered devices basic switch configuration settings such as password changes & firmware upgrades. ...
Archived Product
£102.91
- Intuitive Web GUI.
- Po E safeguard function.
- VLAN support for traffic segmentation.
- Auto Voice & Auto Surveillance


...
Available
£86.91
24/48-Port Web Smart Switch III D-Link′s DES-1210 Series is the latest generation of Web Smart Switches. Equipped with 24 or 48 10/100 Mbps ports, 2 10/100/1000BASE-T ports, & 2 combo 10/100/1000BASE-T/SFP ports, the series integrates advanced management & security functions that provide performance & scalability. While easy to use, the DES-1210 Series provides a complete & affordable solution for small & medium businesses. Management options for the switches include SNMP, Web Management, Smart Console Utility, & Compact Command Lines. The series also supports ACL filtering & D-Link′s Safeguard Engine. Furthermore, the DES-1210-28/52 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Both models come with an innovative fanless design in 19" metal cases. Seamless Integration The Web Smart Switches are designed to provide SMB users a complete control over the network. With Ethernet & Gigabit copper ports capable of connecting to existing Cat.5 twisted-pair cables, these switches eliminate the need for a complex reconfiguration process. The DES-1210 Series allows for flexible connection to a backbone or servers. in addition, all ports support auto-negotiation of MDI/MDIX crossover, or configurable auto MDI & therefore do away with crossover cables or uplink ports. This brings inexpensive & easy connectivity to your desktop. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. Qo S, Bandwidth Control The switches are perfect for deployment in a Vo IP environment, as they support Auto Voice VLAN & Differentiated Services Code Point (DSCP) Qo S for Vo IP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN & by doing so enhance the Vo IP service. With a higher priority & individual VLAN, this feature guarantees the quality & security of Vo IP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or might have high priority. Secure your Network D-Link′s innovative Safeguard Engine function protects the switches against traffic flooding caused by virus attacks. The switches support 802.1X portbased authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network. With the IP-MAC-Port Binding (DHCP Snooping) feature, the switch snoops DHCP information in order to automatically learn IP-MACPort Binding pairs & create a white list. Whenever cyber crime or hacking attempts are found, the IP change is kept under control & the location of the IP address becomes traceable. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Versatile Management The new generation of Web Smart Switches provides growing businesses simple & easy management of their network using an intuitive Smart Console utility or a web-based management interface that enables administrators to remotely control their network down to the port level. The Smart Console easily allows customers to discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC & it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user′s local PC are displayed on screen for instant access. This allows extensive switch configuration settings & basic configuration of discovered devices such as password changes & firmware upgrades. The DES-1210 Series also supports D-View 6.0 & Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security in a consistent way. D-View 6.0 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, & security. CLI management of the switches is possible via Telnet. This makes the adjustment of basic settings like password changes or firmware & configuration file uploads possible. ...
Available
£164.03
24/48-Port Web Smart Switch III D-Link′s DES-1210 Series is the latest generation of Web Smart Switches. Equipped with 24 or 48 10/100 Mbps ports, 2 10/100/1000BASE-T ports, & 2 combo 10/100/1000BASE-T/SFP ports, the series integrates advanced management & security functions that provide performance & scalability. While easy to use, the DES-1210 Series provides a complete & affordable solution for small & medium businesses. Management options for the switches include SNMP, Web Management, Smart Console Utility, & Compact Command Lines. The series also supports ACL filtering & D-Link′s Safeguard Engine. Furthermore, the DES-1210-28/52 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Both models come with an innovative fanless design in 19" metal cases. Seamless Integration The Web Smart Switches are designed to provide SMB users a complete control over the network. With Ethernet & Gigabit copper ports capable of connecting to existing Cat.5 twisted-pair cables, these switches eliminate the need for a complex reconfiguration process. The DES-1210 Series allows for flexible connection to a backbone or servers. in addition, all ports support auto-negotiation of MDI/MDIX crossover, or configurable auto MDI & therefore do away with crossover cables or uplink ports. This brings inexpensive & easy connectivity to your desktop. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. Qo S, Bandwidth Control The switches are perfect for deployment in a Vo IP environment, as they support Auto Voice VLAN & Differentiated Services Code Point (DSCP) Qo S for Vo IP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN & by doing so enhance the Vo IP service. With a higher priority & individual VLAN, this feature guarantees the quality & security of Vo IP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or might have high priority. Secure your Network D-Link′s innovative Safeguard Engine function protects the switches against traffic flooding caused by virus attacks. The switches support 802.1X portbased authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network. With the IP-MAC-Port Binding (DHCP Snooping) feature, the switch snoops DHCP information in order to automatically learn IP-MACPort Binding pairs & create a white list. Whenever cyber crime or hacking attempts are found, the IP change is kept under control & the location of the IP address becomes traceable. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Versatile Management The new generation of Web Smart Switches provides growing businesses simple & easy management of their network using an intuitive Smart Console utility or a web-based management interface that enables administrators to remotely control their network down to the port level. The Smart Console easily allows customers to discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC & it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user′s local PC are displayed on screen for instant access. This allows extensive switch configuration settings & basic configuration of discovered devices such as password changes & firmware upgrades. The DES-1210 Series also supports D-View 6.0 & Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security in a consistent way. D-View 6.0 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, & security. CLI management of the switches is possible via Telnet. This makes the adjustment of basic settings like password changes or firmware & configuration file uploads possible. ...
Archived Product
£12.78
'- The first Green Ethernet technology on the market the DGS-1005D features innovative eco-friendly technology\n- Reduces power consumption & creates less heat\n- Extended product life\n- Reduces Operating Costs.\n\n Power Savings by Number of Connected Ports & Link Status\n Computers do not require Internet access all the time; neither do switches utilize all ports at all times. When a computer or network equipment is shutdown, switches often remain on & continue to consume considerable amount of power. With Green Ethernet technology, D-Link switches can automatically detect link status & reduce power usage of ports that are idle. Computers or any connecting parties set to standby mode (not power off), however, will not provide significant power savings.\n\n Power Savings by Cable Length\n The Green Ethernet switches have the ability to analyze the length of any Ethernet cable connected to them for adjustment of power usage accordingly. Shorter lengths require less power.\n\n Overall Power Savings Per Day\n For a traditional switch, power consumption remains constant even when the ports are not in use. In a standard workday scenario where PCs are used for 10 hours a day & powered off 14 hours a day, & connected to the switch using 20 meter cables, D-Link's Green Ethernet can save up to 27% power used for each system.\n\n The D-Link DGS-1005D is a 5-port 10/100/1000 Mbps Gigabit Switch that delivers power, performance, & reliability in one cost-effective, space-saving design. Increase the speed of your network server & backbone connections, or make Gigabit to the desktop a reality.\n\n Power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.\n\n Power-Packed\n The D-Link DGS-1005D 10/100/1000 Mbps Gigabit Switch features a non-blocking switching architecture that filters & forwards packets at full wire-speed for maximum throughput. An 8, 000 MAC address table provides scalability for even the largest networks.\n\n Address learning & aging, 802.3x Flow Control for full duplex mode, & back pressure flow control for half-duplex mode alleviates traffic congestion & ensures reliable data transmission. Designed using industry standards, it is compatible with virtually all 10, 100, & 1000 Mbps Ethernet devices & other vendor equipment. The D-Link DGS-1005D 10/100/1000 Mbps Gigabit Switch protects your existing network investments while providing you with a straightforward migration path to faster Gigabit speeds.\n\n Easy to use\n The auto features of this gigabit switch make installation plug & play & hassle-free. No configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance.\n\n It also features diagnostic LEDs which display status & activity, allowing you to quickly detect & correct problems on the network. Feature Feature Value Switch type Unmanaged Switch layer L2 Basic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.3, IEEE 802.3u 10G support N Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TFull duplex YMAC address table 8000 entries Switching capacity 10 Gbit/s Maximum data transfer rate 1 Gbit/s Jumbo frames support Y Packet buffer memory 0.112 MBRack mounting N Stackable N Product colour White Power consumption (typical)4.5 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 90% Width 142 mm Depth 107 mm Height 30 mm Weight 210 g Connectivity technology Wired Electromagnetic emissions CE Mark, FCC Class B


...
Available
£12.78
'- The first Green Ethernet technology on the market the DGS-1005D features innovative eco-friendly technology\n- Reduces power consumption & creates less heat\n- Extended product life\n- Reduces Operating Costs.\n\n Power Savings by Number of Connected Ports & Link Status\n Computers do not require Internet access all the time; neither do switches utilize all ports at all times. When a computer or network equipment is shutdown, switches often remain on & continue to consume considerable amount of power. With Green Ethernet technology, D-Link switches can automatically detect link status & reduce power usage of ports that are idle. Computers or any connecting parties set to standby mode (not power off), however, will not provide significant power savings.\n\n Power Savings by Cable Length\n The Green Ethernet switches have the ability to analyze the length of any Ethernet cable connected to them for adjustment of power usage accordingly. Shorter lengths require less power.\n\n Overall Power Savings Per Day\n For a traditional switch, power consumption remains constant even when the ports are not in use. In a standard workday scenario where PCs are used for 10 hours a day & powered off 14 hours a day, & connected to the switch using 20 meter cables, D-Link's Green Ethernet can save up to 27% power used for each system.\n\n The D-Link DGS-1005D is a 5-port 10/100/1000 Mbps Gigabit Switch that delivers power, performance, & reliability in one cost-effective, space-saving design. Increase the speed of your network server & backbone connections, or make Gigabit to the desktop a reality.\n\n Power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.\n\n Power-Packed\n The D-Link DGS-1005D 10/100/1000 Mbps Gigabit Switch features a non-blocking switching architecture that filters & forwards packets at full wire-speed for maximum throughput. An 8, 000 MAC address table provides scalability for even the largest networks.\n\n Address learning & aging, 802.3x Flow Control for full duplex mode, & back pressure flow control for half-duplex mode alleviates traffic congestion & ensures reliable data transmission. Designed using industry standards, it is compatible with virtually all 10, 100, & 1000 Mbps Ethernet devices & other vendor equipment. The D-Link DGS-1005D 10/100/1000 Mbps Gigabit Switch protects your existing network investments while providing you with a straightforward migration path to faster Gigabit speeds.\n\n Easy to use\n The auto features of this gigabit switch make installation plug & play & hassle-free. No configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) & intelligently adjusts for compatibility & optimal performance.\n\n It also features diagnostic LEDs which display status & activity, allowing you to quickly detect & correct problems on the network. Feature Feature Value Switch type Unmanaged Switch layer L2 Basic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.3, IEEE 802.3u 10G support N Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TFull duplex YMAC address table 8000 entries Switching capacity 10 Gbit/s Maximum data transfer rate 1 Gbit/s Jumbo frames support Y Packet buffer memory 0.112 MBRack mounting N Stackable N Product colour White Power consumption (typical)4.5 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 90% Width 142 mm Depth 107 mm Height 30 mm Weight 210 g Connectivity technology Wired Electromagnetic emissions CE Mark, FCC Class B


...
Available
£53.25
Gigabit Connection for Small Business The D-Link 8-Port Gigabit Ethernet Po E Switch (DGS-1008P) enables office users the ability to easily connect & supply power to Power over Ethernet (Po E) devices such as IP cameras, IP phones, & wireless access points (APs) to a network. The 8 Gigabit ports provide connectivity for devices & applications that require high speed network access & reduce bottlenecks that can interrupt communication. The DGS-1008P also provides the opportunity to add additional Ethernet devices like computers, printers, & Network Attached Storage (NAS) onto a network. This compact Po E switch operates quietly, making it ideal to be used in virtually any room or office. Power Over Ethernet (Po E) The first four ports of the DGS-1008P supports the IEEE 802.3af Po E protocol. Each of these four ports can supply up to 15.4 watts for a total Po E budget of 52 watts, allowing users to attach an IEEE 802.3af compliant device to the DGS-1008P that requires no additional power. Use Po E for applications that are far from power outlets or when you want to minimize the clutter of extra cables. Auto MDI/MDIX Crossover All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables. Easy Installation, no Additional Setup The DGS-1008P 8-Port Gigabit Ethernet Switch is plug-&-play & requires no additional configuration. Its compact size & fan-less design allow for installation anywhere data or power is required. In addition, the switch supports IEEE 802.1p Qo S, which automatically classifies & prioritizes compliant device traffic to ensure time sensitive data such as Vo IP is forwarded without delay. Conserves Energy The DGS-1008P 8-Port Gigabit Switch makes use of D-Link Green™ eco-friendly technology, providing energy savings, reduced power consumption, & a longer product life without sacrificing operational performance or functionality. This switch helps to conserve energy through methods such as Link Status & Cable Length Detection. The Link Status feature automatically powers down ports that have no link, allowing the switch to save substantial amounts of energy by cutting power for unused ports or ports connected to computers that have been shut down. It can also detect connected cable lengths, & adjust power usage accordingly, helping you save energy without affecting networking performance. In addition, the fan-less design extends the product′s life & also reduces noise. ...
Archived Product
£264.98
26 Port Gigabit Max Po E Switch\n\n DGS-1026MP\n\n The D-Link DGS-1026MP 26-Port Gigabit Max Po E Switch enables users to easily connect & power Po E-capable devices such as wireless access points (APs), IP cameras, & IP phones.\n\n Power over Ethernet\n The DGS-1026MP features 24 10/100/1000BASE-T ports that support the IEEE 802.3at Po E+ standard. Each of the 24 Po E ports can supply up to 30 W, with a total Po E budget of 370 W.\n The Po E usage LEDs further provide real-time feedback on the current Po E power usage on the network & helps plan out the Po E network budget, preventing Po E overloading problems. \n\n Expand Your Network\n With 2 x Gigabit combo uplink ports, businesses have additional flexibility their network deployment, offering a choice for upstream or downstream server connections via a fibre or copper interface.\n\n Energy Efficient\n To help small businesses save on operating costs, the DGS-1026MP supports IEEE 802.3az Energy Efficient Ethernet (EEE). This feature actively monitors network traffic & automatically puts ports that are not being used into hibernation, powering them on only when they are required.\n\n Hassle-Free Setup\n The DGS-1026MP is a plug-&-play device that requires no configuration, so setup is simple & hassle-free. Simply connect the switch to the network & then connect multiple computers, share files & make Vo IP calls across the network. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Installed SFP modules quantity 1 Combo SFP ports quantity 2 Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z Auto MDI/MDI-XYMAC address table 8192 entries Switching capacity 52 Gbit/s Throughput 38.69 Mpps Store-&-forward Y Product colour Black, Grey LED indicators Activity, Link, Po E, Power, Power fail, Speed Number of fans 2 fan (s) Safety UL/CSA 60950-1, EN 60950-1, IEC 60950-1 Certification FCC Class An C En CCCn Ro H Sn VCCIn BSMIn RCMBuffer size 512 KBMean time between failures (MTBF)205975 h AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)444.1 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 24 Power over Ethernet (Po E) power per port 30 WTotal Power over Ethernet (Po E) budget 370 WOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-40
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Heat dissipation 1515 BTU/h Width 440 mm Depth 250.4 mm Height 44 mm Weight 3.1kg





...
Available

D-Link DES-1210-28P Network Switch

The DES-1210-28 is part of D-Link′s third generation of Web Smart Switches that integrates advanced management and security functions for performance and scalability. While easy to use, the DES-1210-28 provides a complete and affordable solution for small and medium businesses (SMB). It includes an innovative fanless design in a 19" metal case. Seamless Integration All ports support auto-negotiation of MDI/MDIX crossover, making crossover cables or uplink ports redundant. This brings inexpensive and easy connectivity to your desktop. At 2000 Mbps Full Duplex, the Gigabit uplinks provide high-speed data pipes to servers or a backbone with minimum data transfer loss. Comprehensive Security D-Link′s innovative Safeguard Engine function protects the switch against traffic
flooding caused by virus attacks. In addition, the switch supports Access Control Lists (ACL) and 802.1X port-based authentication through external RADIUS servers. IP-MAC-Port Binding allows administrators to trace the location of IP addresses by binding the source IP to its associated MAC address and source port. For added security, the DHCP Server Screening feature1 screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. QoS and bandwidth control The switch is ideal for deployment in a VoIP environment, as it supports Auto Voice VLAN and Differentiated Services Code Point (DSCP) QoS for VoIP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN and by doing so enhance the VoIP service. With a higher
priority and individual VLAN, this feature guarantees the quality and security of VoIP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or higher priority. Extensive Layer 2 features The switch is equipped with a complete lineup of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree and Link Aggregation Control Protocol (LACP). Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. Cable Diagnostics is designed for network
administrators to quickly examine the quality of the copper cables and also determine the type of cable error. Versatile Management This third generation of Web Smart Switches provides growing businesses with simple and easy management of their network using an intuitive SmartConsole utility or a web-based management interface. The SmartConsole easily allows administrators to discover multiple D-Link Web Smart Switches within the same L2 network segment: switches are displayed on screen for instant access. With this utility, users do not need to change the IP address of their PC; it also provides an easy initial set up of the Smart Switches. This allows extensive switch configuration settings and basic configuration of discovered devices such as password changes and firmware upgrades. The
DES-1210-28 also supports D-View 6.0 and Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security in a consistent way. D-View 6.0 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, and security.
Availability: In Stock
£189.86

Product Description

The DES-1210-28 is part of D-Link′s third generation of Web Smart Switches that integrates advanced management & security functions for performance & scalability. While easy to use, the DES-1210-28 provides a complete & affordable solution for small & medium businesses (SMB). It

Includes::
an innovative fanless design in a 19" metal case. Seamless Integration All ports support auto-negotiation of MDI/MDIX crossover, making crossover cables or uplink ports redundant. This brings inexpensive & easy connectivity to your desktop. At 2000 Mbps Full Duplex, the Gigabit uplinks provide high-speed data pipes to servers or a backbone with minimum data transfer loss. Comprehensive Security D-Link′s innovative Safeguard Engine function protects the switch against traffic flooding caused by virus attacks. In addition, the switch supports Access Control Lists (ACL) & 802.1X port-based authentication through external RADIUS servers. IP-MAC-Port Binding allows administrators to trace the location of IP addresses by binding the source IP to its associated MAC address & source port. For added security, the DHCP Server Screening feature 1 screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. Qo S & bandwidth control The switch is ideal for deployment in a Vo IP environment, as it supports Auto Voice VLAN & Differentiated Services Code Point (DSCP) Qo S for Vo IP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN & by doing so enhance the Vo IP service. With a higher priority & individual VLAN, this feature guarantees the quality & security of Vo IP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or higher priority. Extensive Layer 2 features The switch is equipped with a complete lineup of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. Versatile Management This third generation of Web Smart Switches provides growing businesses with simple & easy management of their network using an intuitive Smart Console utility or a web-based management interface. The Smart Console easily allows administrators to discover multiple D-Link Web Smart Switches within the same L2 network segment: switches are displayed on screen for instant access. With this utility, users do not need to change the IP address of their PC; it also provides an easy initial set up of the Smart Switches. This allows extensive switch configuration settings & basic configuration of discovered devices such as password changes & firmware upgrades. The DES-1210-28 also supports D-View 6.0 & Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security in a consistent way. D-View 6.0 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, & security.

Reviews/Comments

Add New

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Copper - A metal element with a chemical formula of CU. A excellent conductor of electricity and heat.
Engine - A machine designed to convert fuel into motion
phone - Short for telephone. A device that transmits sound allowing point to point communication over long distances
compact - Carefuly designed to ensure an item has a minimal physical size
PC - Personal Computer - an electronic device for acheiving multiple electronic tasks including word processing, emails and internet access
Cable - A series of wires bonded to form a single thread
speed - A measurement of how fast an object travels between two points
Quality - An object that has quality is superior in function and finish than a less quality object.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Network - A link and communication between things. Often computers or people.
Small - something that takes up less space than normal.
Compact - something that has a lot combined within a small space.
Versatile - Something that can be adapted to various different tasks.
Versatile - Something that is able to adapt to its surroundings or its requirements.
Affordable - Something that is within a set price range that can be afforded due to its reasonable price.
Simple - Basic, easy no difficulty in understanding.
Layer - Adding extra quantities of materials for extra practical benefits, e.g. warmth.
Innovative - An idea that shows new method and ways of thinking, an original design.
Design - A drawing or styles that shows the look and functionality of something before its made.
Feature - An attribute that makes something stand out.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Individual - A single separate item or person.
Ideal - Something that satisfies a perfect criteria.
Environment - The conditions and surrounding area.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu