'- Tests 4 types of cables: RJ-11/-45/USB/BNCrn- Simple one-button testrn- Tests patch cables & installed wiringrn- 600 ft. test distancern- LEDs indicate connections & faultsrn- Tests shielded & unshielded LAN cable.\n\n\n\n Product ID: 351911\n\n\n\n\n\n Model: 4-in-1 Cable Tester, RJ-11, RJ-45, USB (Universal Serial Bus) & BNC, One Button Test\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

The Intellinet Network Solutions 4-Piece Network Tool Kit allows both the professional installer & the computer enthusiast to handle cabling, terminating & troubleshooting a home or business network with relative ease. This kit

Includes:: an 8P8c modular plug crimper with cable cutter, an LSA punch-down tool with 66 & 110/88 blades, a 4 1/2"" diagonal-cutting plier tool & an RJ45/RJ12/RJ11 LAN cable tester set. This tool kit comes complete with a durable organising bag for easy carrying & storage.\n\n\n\n Product ID: 780070\n\n\n\n\n\n Model: 4-Piece Network Tool Kit, 4 Tool Network Kit Composed of LAN Tester, LSA punch down tool, Crimping Tool & Cut & Stripping tool\n\n\n\n\n\n\n\n\n\n\n\n\n\n

...

The Intellinet Network Solutions 4-Piece Network Tool Kit allows both the professional installer & the computer enthusiast to handle cabling, terminating & troubleshooting a home or business network with relative ease. This kit

Includes:: an 8P8c modular plug crimper with cable cutter, an LSA punch-down tool with 66 & 110/88 blades, a 4 1/2"" diagonal-cutting plier tool & an RJ45/RJ12/RJ11 LAN cable tester set. This tool kit comes complete with a durable organising bag for easy carrying & storage.\n\n\n\n Product ID: 780070\n\n\n\n\n\n Model: 4-Piece Network Tool Kit, 4 Tool Network Kit Composed of LAN Tester, LSA punch down tool, Crimping Tool & Cut & Stripping tool\n\n\n\n\n\n\n\n\n\n\n\n\n\n

...

The Intellinet Network Solutions 5-in-1 Cable Tester is an affordable & versatile MIS tool that tests five common LAN & computer cables up to 600 ft. long: Ethernet (RJ45), 10 Base, RJ11, Fire Wire (1394) & USB (Universal Serial Bus). It checks for continuity, crossover & shorting. Testing is completed with the press of a button, & LEDs indicate connections & faults of wires & pins. Designed for use with both shielded (STP) & unshielded (UTP) cables up to 180 m (600 ft.) long.\n\n\n\n Product ID: 780094\n\n\n\n\n\n Model: 5-in-1 Cable Tester, Tests 5 Commonly Used Network RJ45 & Computer Cables\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

The Intellinet Network Solutions 5-in-1 Cable Tester is an affordable & versatile MIS tool that tests five common LAN & computer cables up to 600 ft. long: Ethernet (RJ45), 10 Base, RJ11, Fire Wire (1394) & USB (Universal Serial Bus). It checks for continuity, crossover & shorting. Testing is completed with the press of a button, & LEDs indicate connections & faults of wires & pins. Designed for use with both shielded (STP) & unshielded (UTP) cables up to 180 m (600 ft.) long.\n\n\n\n Product ID: 780094\n\n\n\n\n\n Model: 5-in-1 Cable Tester, Tests 5 Commonly Used Network RJ45 & Computer Cables\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Save installation time & money with Po E. _x 000D_n _x 000D_n The Intellinet Network Solutions 8-Port Fast Ethernet Po E+ Switch (560764) is designed to pass both data & electrical power to a number of Po E-compatible devices via standard Cat 5e or Cat 6 network cables. Equipped with eight Fast Ethernet ports (all of which support 802.3at/af Po E/ Po E+), this switch can power wireless LAN access points & bridges, Vo IP phones, IP video cameras & more while delivering network speeds of up to 100 Mbps. _x 000D_n _x 000D_n Power over Ethernet 802.3at _x 000D_n The Intellinet Network Solutions 8-Port Fast Ethernet Po E+ Switch supports the IEEE 802.3at protocol & is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time & expense of electrical rewiring & minimising the unsightly clutter caused by power supplies & adapters in awkward places such as ceilings & walls. Any mix of Po E & non-Po E devices is supported, & thanks to its short circuit, overload & high-voltage protection function, your equipment is well protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet Network Solutions Po E/ Po E+ Splitter. _x 000D_n _x 000D_n _x 000D_n* Total Po E budget for this switch is 140 watts. Per-port average power distribution is 17.5 watts; maximum per-port power usage cannot exceed 30 watts.\n\n\n\n Product ID: 560764-UK\n\n\n\n\n\n Model: 8-Port Fast Ethernet Po E+ Switch, 8 x Po E ports, IEEE 802.3at/af Power-over-Ethernet (Po E+/ Po E), Endspan, Desktop (UK 3-pin plug)\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

When you need power for compatible devices, Power over Ethernet provides it._x 000D_n_x 000D_n The Intellinet Network Solutions 8-Port Gigabit Ethernet Po E+ Switch is designed to pass both data & electrical power to a number of Po E-compatible devices via standard Cat 5e or Cat 6 network cables. Equipped with eight Gigabit Ethernet ports, this switch can power wireless LAN access points & bridges, Vo IP phones, IP video cameras & more while delivering network speeds of up to 1000 Mbps._x 000D_n_x 000D_n Save installation time & money with Po E 802.3at._x 000D_n_x 000D_n The Intellinet Network Solutions 8-Port Gigabit Ethernet Po E+ Switch supports the IEEE 802.3at protocol & is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time & expense of electrical rewiring & minimising the unsightly clutter caused by power supplies & adapters in awkward places such as ceilings & walls. Any mix of Po E & non-Po E devices is supported, & thanks to its short circuit, overload & high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (e.g., legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions Po E/ Po E+ Splitter. _x 000D_n _x 000D_n* Total Po E budget for this switch is 140 watts. Per-port average power distribution is 17.5 watts; maximum per-port power usage cannot exceed 30 watts.\n\n\n\n Product ID: 560641-UK\n\n\n\n\n\n Model: 8-Port Gigabit Ethernet Po E+ Switch, 8 x Po E ports, IEEE 802.3at/af Power-over-Ethernet (Po E+/ Po E), Endspan, Desktop (UK 3-pin plug)\n\n\n\n\n\n\n\n Product Video: https://youtu.be/cdwswp EZ68Y\n\n\n\n\n\n ...

Save installation time & money with Po E n n The Intellinet Network Solutions 8-Port Gigabit Ethernet Po E+ Web-Managed Switch is designed to pass both data & electrical power to a number of Po E-compatible devices via standard Cat 5e or Cat 6 network cables. Equipped with eight Gigabit Ethernet ports (all of which support 802.3at/af Po E/ Po E+), this switch can power wireless LAN access points & bridges, Vo IP phones, IP video cameras & more while delivering network speeds of up to 1000 Mbps. n n Power over Ethernet 802.3at n The Intellinet Network Solutions 8-Port Gigabit Ethernet Po E+ Web-Managed Switch supports the IEEE 802.3at protocol & is designed to inject up to 30 watts of power per port.* IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time & expense of electrical rewiring & minimises the unsightly clutter caused by power supplies & adapters in awkward places like ceilings & walls. Any mix of Po E & non-Po E devices is supported, & thanks to its short circuit, overload & high-voltage protection function, your equipment is well protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions Po E/ Po E+ Splitter. n n Web Management n This Po E switch is equipped with an impressive array of advanced management functions that allow you to be in full control over your network. The 8-Port Gigabit Ethernet Po E+ Web-Managed Switch supports VLAN, port aggregation, Qo S & port mirroring, & it supports SNMP V1 & the popular V2c, just to name a few. n n Po E Management n The Intellinet Network Solutions 8-Port Gigabit Ethernet Po E+ Web-Managed Switch provides extensive Po E management features. The delay-time-per-port feature reduces the power hike that usually happens at system start, & the Po E priority feature (low, medium, high) means that you can define mission-critical, high-priority ports that will continue to receive power even if the switch's power budget limit has been exceeded. Furthermore, you can define the maximum available power per port, turn Po E on & off per port & monitor the current power draw of all connected Po E devices. Finally, the Intellinet Network Solutions switch can send SNMP-traps messages to alert the administrator that the total power draw on the switch exceeds the user-defined threshold value. n n Eliminate Bottlenecks with a total of 10 Gigabit Ports n Equipped with eight auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers & other networking devices. In addition, two small, form-factor pluggable GBIC module slots (SFP) provide fibre connectivity for greater distances. These are not shared combo ports, but true Gigabit ports, pushing the total available bandwidth up to 20 Gbps. n n* Total Po E budget for this switch is 140 watts. Per-port average power distribution is 17.5 watts; maximum per-port power usage cannot exceed 30 watts.\n\n\n\n Product ID: 561167-UK\n\n\n\n\n\n Model: 8-Port Gigabit Ethernet Po E+ Web-Managed Switch with 2 SFP Ports, IEEE 802.3at/af Power over Ethernet (Po E+/ Po E) Compliant, 140 W, Endspan, Desktop, 19"" Rackmount (UK 3-pin plug)\n\n\n\n\n\n\n\n Product Video: https://youtu.be/ahv I1N0ias 4\n\n\n\n\n\n ...

Product ID: 713658\n\n\n\n\n\n Model: Cage Nut Set, 100 pieces\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Product ID: 713658\n\n\n\n\n\n Model: Cage Nut Set, 100 pieces\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...