Inject 80 Watts of Power Into Your Internet of Things (Io T) or Po E Network!nn Up to the tasknn The Intellinet Network Solutions 2-Port Gigabit Ultra Po E Injector provides up to 50 W on the first port & up to 30 W on the second port to support Io T applications such as lighting, sensors & building automation. Nurse call systems require 30 to 50 watts of power. Lighting fixtures & controllers require 40 to 50 watts. Thin clients draw up to 50 watts. This Ultra Po E injector is an excellent solution for bringing power to these critical systems.nn Full Compatibility with Existing IEEE 802.3af/at Po E Powered Devicesnn The Intellinet Network Solutions 2-Port Gigabit Ultra Po E Injector help you connect your IEEE 802.3af/at-compliant products to a non-Po E LAN switch port. The injector can be used to connect any IEEE 802.3af/at-powered device (PD)
- including a wireless access point, IP phone, network camera & more
- to a switch.nn Switching Capabilitiesnn For maximum versatility, this injector can also be used as a 2-Port Po E Switch with multiple capabilities such as MAC address learning & a backplane speed up to 6 Gbps.nn Reduced Wiring Costsnn It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the Po E Injector to the LAN switch port, & use the existing network cabling to deliver DC power as well as transfer data.nn Protected Equipmentnn Once DC power is connected to your networked equipment through the network cabling, this Intellinet Network Solutions Po E Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads & high voltages.\n\n\n\n Product ID: 561488-UK\n\n\n\n\n\n Model: 2-Port Gigabit Ultra Po E-Injector 10/100/1000 Mbit/s (UK 3-pin plug)\n\n\n\n\n\n Manual: http://objects.icecat.biz/objects/mmo_78844902_1593543958_6788_11875.pdf\n\n\n\n\n\n\n\n

...

'- Allows two RJ45 ports to share one Cat 5 shielded network cablen- means that you can only lay one cable run for two connectionsn- Used in pairs (one modular distributor on each end of the network cable)n- Requires a coupler (female to female) for connection on each end of the network cablen- Couplers not included\n\n\n\n Product ID: 504195\n\n\n\n\n\n Model: 2-Port Modular Distributor, Cat 5e, FTP, allows two RJ45 ports to share one Cat 5e network cable\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

'- Allows two RJ45 ports to share one Cat 5 shielded network cablen- means that you can only lay one cable run for two connectionsn- Used in pairs (one modular distributor on each end of the network cable)n- Requires a coupler (female to female) for connection on each end of the network cablen- Couplers not included\n\n\n\n Product ID: 504195\n\n\n\n\n\n Model: 2-Port Modular Distributor, Cat 5e, FTP, allows two RJ45 ports to share one Cat 5e network cable\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

The Intellinet Network Solutions 24-Port Gigabit Ethernet Po E+ Web-Managed AV Switch with 2 SFP & 2 SFP/RJ45 Combo Uplinks is an enterprise-class switch specifically designed for use in AV Rack applications. With front-facing indicators & rear-facing ports, the switch is designed for easy installation & high performance in an environment where traffic on the network & the number of users could increase continuously.nn* Total Po E budget for this switch is 425 watts. Per-port average power distribution is 17.7 watts; maximum per-port power usage cannot exceed 30 watts.\n\n\n\n Product ID: 561457-UK\n\n\n\n\n\n Model: 24-Port Gigabit Ethernet Po E+ Web-Managed AV Switch with 2 SFP & 2 RJ45 Combo Uplinks, 24 Rear-Facing Po E+ Ports, IEEE 802.3at Po E (Po E+), Layer 2+, Two 1 Gb E SFP Open Slots & Two RJ45 Combo Uplink Ports, Endspan, 19"" Rackmount (UK 3-pin plug)\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

'- Tests 4 types of cables: RJ-11/-45/USB/BNCrn- Simple one-button testrn- Tests patch cables & installed wiringrn- 600 ft. test distancern- LEDs indicate connections & faultsrn- Tests shielded & unshielded LAN cable.\n\n\n\n Product ID: 351911\n\n\n\n\n\n Model: 4-in-1 Cable Tester, RJ-11, RJ-45, USB (Universal Serial Bus) & BNC, One Button Test\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

The Intellinet Network Solutions 4-Piece Network Tool Kit allows both the professional installer & the computer enthusiast to handle cabling, terminating & troubleshooting a home or business network with relative ease. This kit

Includes:: an 8P8c modular plug crimper with cable cutter, an LSA punch-down tool with 66 & 110/88 blades, a 4 1/2"" diagonal-cutting plier tool & an RJ45/RJ12/RJ11 LAN cable tester set. This tool kit comes complete with a durable organising bag for easy carrying & storage.\n\n\n\n Product ID: 780070\n\n\n\n\n\n Model: 4-Piece Network Tool Kit, 4 Tool Network Kit Composed of LAN Tester, LSA punch down tool, Crimping Tool & Cut & Stripping tool\n\n\n\n\n\n\n\n\n\n\n\n\n\n

...

The Intellinet Network Solutions 5-in-1 Cable Tester is an affordable & versatile MIS tool that tests five common LAN & computer cables up to 600 ft. long: Ethernet (RJ45), 10 Base, RJ11, Fire Wire (1394) & USB (Universal Serial Bus). It checks for continuity, crossover & shorting. Testing is completed with the press of a button, & LEDs indicate connections & faults of wires & pins. Designed for use with both shielded (STP) & unshielded (UTP) cables up to 180 m (600 ft.) long.\n\n\n\n Product ID: 780094\n\n\n\n\n\n Model: 5-in-1 Cable Tester, Tests 5 Commonly Used Network RJ45 & Computer Cables\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

The Intellinet Network Solutions 5-in-1 Cable Tester is an affordable & versatile MIS tool that tests five common LAN & computer cables up to 600 ft. long: Ethernet (RJ45), 10 Base, RJ11, Fire Wire (1394) & USB (Universal Serial Bus). It checks for continuity, crossover & shorting. Testing is completed with the press of a button, & LEDs indicate connections & faults of wires & pins. Designed for use with both shielded (STP) & unshielded (UTP) cables up to 180 m (600 ft.) long.\n\n\n\n Product ID: 780094\n\n\n\n\n\n Model: 5-in-1 Cable Tester, Tests 5 Commonly Used Network RJ45 & Computer Cables\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Save installation time & money with Po E. _x 000D_n _x 000D_n The Intellinet Network Solutions 8-Port Fast Ethernet Po E+ Switch (561075) is designed to pass both data & electrical power to a number of Po E-compatible devices via standard Cat 5e or Cat 6 network cables. Equipped with eight Fast Ethernet ports (four of which support 802.3at/af Po E/ Po E+), this switch can power wireless LAN access points & bridges, Vo IP phones, IP video cameras & more while delivering network speeds of up to 100 Mbps. _x 000D_n _x 000D_n Power over Ethernet 802.3at _x 000D_n The Intellinet Network Solutions 8-Port Fast Ethernet Po E+ Switch supports the IEEE 802.3at protocol & is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time & expense of electrical rewiring & minimising the unsightly clutter caused by power supplies & adapters in awkward places such as ceilings & walls. Any mix of Po E & non-Po E devices is supported, & thanks to its short-circuit, overload & high-voltage protection function, your equipment is well protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet Network Solutions Po E/ Po E+ Splitter. _x 000D_n _x 000D_n _x 000D_n* Total Po E budget for this switch is 70 watts. Per-port average power distribution is 17.5 watts; maximum per-port power usage cannot exceed 30 watts.\n\n\n\n Product ID: 561075-UK\n\n\n\n\n\n Model: 8-Port Fast Ethernet Po E+ Switch, 4 x Po E IEEE 802.3at/af Power-over-Ethernet (Po E+/ Po E) ports, 4 x Standard RJ45 Ports, Endspan, Desktop, 19"" Rackmount (UK 3-pin plug)\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Save installation time & money with Po E. _x 000D_n _x 000D_n The Intellinet Network Solutions 8-Port Fast Ethernet Po E+ Switch (560764) is designed to pass both data & electrical power to a number of Po E-compatible devices via standard Cat 5e or Cat 6 network cables. Equipped with eight Fast Ethernet ports (all of which support 802.3at/af Po E/ Po E+), this switch can power wireless LAN access points & bridges, Vo IP phones, IP video cameras & more while delivering network speeds of up to 100 Mbps. _x 000D_n _x 000D_n Power over Ethernet 802.3at _x 000D_n The Intellinet Network Solutions 8-Port Fast Ethernet Po E+ Switch supports the IEEE 802.3at protocol & is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time & expense of electrical rewiring & minimising the unsightly clutter caused by power supplies & adapters in awkward places such as ceilings & walls. Any mix of Po E & non-Po E devices is supported, & thanks to its short circuit, overload & high-voltage protection function, your equipment is well protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet Network Solutions Po E/ Po E+ Splitter. _x 000D_n _x 000D_n _x 000D_n* Total Po E budget for this switch is 140 watts. Per-port average power distribution is 17.5 watts; maximum per-port power usage cannot exceed 30 watts.\n\n\n\n Product ID: 560764-UK\n\n\n\n\n\n Model: 8-Port Fast Ethernet Po E+ Switch, 8 x Po E ports, IEEE 802.3at/af Power-over-Ethernet (Po E+/ Po E), Endspan, Desktop (UK 3-pin plug)\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...