\n Draytek VAP1060C-K wireless access point 2400 Mbit/s White Power over Ethernet (Po E)\n \n \n \n \n \n \n Manufacturer:\n Draytek\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Wireless Access Points\n \n \n SKU:\n VAP1060C-K\n \n \n EAN:\n 4710484741523\n \n \n \n \n \n Description\n \n \n Wi-Fi 6
- Fast & Efficient\n\n The Dray Tek Vigor AP 1060C is a Wi-Fi 6 AX3600 access point with 2.5 Gbps Ethernet capability. The latest wireless standard dramatically improves performance, handling efficiently multiple users & devices. The technology is partially based on LTE features used on mobile networks where many connections are managed by a single AP (mast).\n This powerful access point can handle even more SSIDs. You can configure up to 8 for each wireless band (16 SSIDs in total).\n\n 2.5 Gigabit Power-over-Ethernet\n The Vigor AP 1060C is designed to suit any application, with higher throughput of up to 2.5 Gigabit Ethernet interface, & built-in Po E (Standard IEEE 802.3af Power over Ethernet) as standard, along with the option for powering via DC power supply. Connect the Vigor AP to a Po E-enabled Ethernet switch or Po E injector to power it without local power to the unit (power supply)
- the Vigor AP 1060C will take its power from the Ethernet cable.\n\n Po E is ideal for office installations where Ethernet is available but power isn't. It also provides some great management features, the Po E Device Check feature of Po E Vigor Switch switches can monitor & alert if a Po E device stops responding, or providing its services.\n\n In Mesh wireless networks, where Po E may not be possible, the Vigor AP 1060C can be powered via DC power supply, with its Ethernet port available for use as an uplink to the Mesh network.\n\n Ceiling or Wall Mounted\n\n For a convenient & tidy installation, the Vigor AP 1060C is designed for installation on ceilings & walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms & public spaces.\n\n For mounting on solid ceilings & walls, a circular mounting plate (included with the unit) is fitted & then the Vigor AP 1060C is secured into place by twisting the Vigor AP into the mounting plate.\n\n For suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\n\n Cabling for the Vigor AP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\n\n AP & Repeater Modes\n The Vigor AP 1060C is configurable to suit most networks, with AP & Range Extender modes. In addition to its Mesh capability, it's ideal as a st&-alone Access Point to provide Wi-Fi connectivity for routers & networks without wireless.\n\n Use the Vigor AP 1060C as a Range Extender to connect to any existing wireless network & boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\n\n Cloud Management & More\n Dray Tek Vigor AP wireless access points can be managed as st&-alone APs with their extensive web user interface.\n\n To manage more than one access point, either for a single site or spanning multiple sites, Dray Tek offer a multitude of options for managing Vigor AP access points:\n\n Cloud Management
- Vigor ACS\n Dray Tek's Vigor ACS central management platform makes it possible to manage all Dray Tek products from the Cloud or your own private server. Dray Tek's access points, switches & routers can all be managed through the Vigor ACS management portal, with all of the menu options & features available, just as if they were being set up locally. Dashboard view gives a full overview of a Vigor AP's status & usage.\n\n Vigor ACS is great for managing Vigor A Ps spread across multiple sites, with AP profiles to configure wireless settings, passwords & VLANs. Apply AP profiles to reconfigure all APs on one site or multiple sites in minutes.\n\n Ceiling or Wall Mounted\n\n For a convenient & tidy installation, the Vigor AP 1060C is designed for installation on ceilings & walls, blending into its surroundings with a matte finish. It's ideal for providing wireless access to large rooms & public spaces.\n\n For mounting on solid ceilings & walls, a circular mounting plate (included with the unit) is fitted & then the Vigor AP 1060C is secured into place by twisting the Vigor AP into the mounting plate.\n\n For suspended ceilings, additional mounts are included to attach to ceiling T-rails, clipping securely into place.\n\n Cabling for the Vigor AP can be discreetly run through the mounting plate or through a cable gap in the side. An included cover for this gap can be installed where cables are run through to the back of the access point.\n\n AP & Repeater Modes\n The Vigor AP 1060C is configurable to suit most networks, with AP & Range Extender modes. In addition to its Mesh capability, it's ideal as a st&-alone Access Point to provide Wi-Fi connectivity for routers & networks without wireless.\n\n Use the Vigor AP 1060C as a Range Extender to connect to any existing wireless network & boost the signal, extending wireless coverage to areas that otherwise would have a patchy signal.\n\n Mobile Device Management\n\n Through the web interface of the Vigor AP 1060C, network administrators can easily check on AP data usage & clients connected, with options to disconnect or block disruptive clients.\n\n Mobile Device Management builds on regular Access Control, which can be used to whitelist & blacklist individual clients. MDM makes it possible to set up SSIDs that only Windows or Apple desktops can connect to, disconnecting Android or i OS clients or vice versa, to suit the requirements of your wireless network.\n\n Analytics data from each Vigor AP graphs how many wireless clients have connected to the AP over time, as well as how many wireless clients passed by without connecting.\n\n AP Assisted Roaming\n Large wireless networks spanning multiple access points may sometimes seem slow to users, because their device is clinging on to a far away access point. Even when a closer access point is available for their device to connect to, which can slow down overall performance for all users connected to that now distant AP.\n\n Dray Tek solve this issue with AP-Assisted Roaming, which requires no central controller to operate. With AP-Assisted Roaming, Vigor A Ps communicate with each other to determine which clients can get a better signal as those clients move around.\n\n If a client moves into range of another Vigor AP access point, that AP informs the now distant AP, which makes an informed decision to disconnect the remote 'sticky' client. Allowing the client to quickly re-associate with their nearest AP, giving the user stronger signal & better speeds.\n \n \n \n Specifications\n \n Data transmission Maximum data transfer rate 2400 Mbit/s Performance 2.4 GHz Yes 5 GHz Yes Wi-Fi Multimedia (WMM)/ (WME) Yes Reset button Yes Number of users 256 user (s) Networking standards IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Maximum data transfer rate 2400 Mbit/s MIMO type Multi User MIMOMIMOYes Network Number of users 256 user (s) Networking standards IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Features 2.4 GHz Yes 5 GHz Yes Wi-Fi Multimedia (WMM)/ (WME) Yes Number of users 256 user (s) Networking standards IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Maximum data transfer rate 2400 Mbit/s MIMO type Multi User MIMOMIMOYes Maximum data transfer rate (2.4 GHz)1200 Mbit/s Maximum data transfer rate (5 GHz)2400 Mbit/s Security Security algorithms WPA, WPA2, WPA3 Service Set Identifier (SSID) features Hidden SSIDProtocols DHCP client Yes Management features Comm&-line interface (CLI) Yes Ports & interfaces Ethernet LAN (RJ-45) ports 1 Power Power consumption (max)21 WPower over Ethernet (Po E) Yes Design Placement Ceiling, Wall Product colour White Reset button Yes WPS push button Yes Antenna Antenna type Internal Antennas quantity 9 Antenna gain level (max)5.8 d Bi Technical details Reset button Yes WPS push button Yes Sustainability compliance Yes Sustainability certificates CE, Ro HSOperational conditions Operating relative humidity (H-H)5
- 90% Operating temperature (T-T)0
- 40 &176;CWeight & dimensions Width 205 mm Depth 205 mm Weight 809 g Height 33.2 mm Packaging data Quick start guide Yes Cables included LAN (RJ-45) Packaging content Quick start guide Yes Cables included LAN (RJ-45) Other features WPS push button Yes\n \n \n\n\n\n\n\n\n\n