The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to help connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast & enhanced security features, making them an ideal Gigabit access layer solution. The DGS-3130-30TS/54TS provide 24 or 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-30PS/54PS provide 24 or 48 10/100/1000 Mbps Power over Ethernet (Po E) Gigabit Ethernet ports. The DGS-3130-30S/54S provide 24 or 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-30PS/54PS supports the IEEE 802.3af & IEEE 802.3at Po E standards. The default power budget for these models is 370 watts & can be expanded to 740 watts with the DPS-700 redundant power supply. The switches are also equipped with a USB (Universal Serial Bus) 2.0 port, allowing the user to boot images & upload configuration files directly, as well as conveniently save syslog files to an USB (Universal Serial Bus) 2.0 storage device.\n\n Enhanced Network Reliability\n The DGS-3130 Series targets enterprises & metro Ethernet applications, & customers who require a high level of network security & maximum uptime. All the models in the DGS-3130 Series support an external redundant power supply to ensure continued operation. In addition, these switches incorporate essential reliability features to enhance network resilience, including 802.1D Spanning Tree (STP), 802.1w Rapid Spanning Tree (RSTP), & 802.1s Multiple Spanning Tree (MSTP), Loopback Detection (LBD), & Broadcast Storm Control. ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) minimizes the recovery time to 50 ms. For load sharing & redundancy backup in a switch cascading/server attachment configuration, the DGS-3130 Series provides dynamic 802.3ad Link Aggregation Port Trunking.\n\n Comprehensive Security Features\n The DGS-3130 Series provides users with security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & define the port number to enhance user access control. With the DHCP Snooping feature, the switch automatically learns IP/MAC pairs by snooping DHCP packets & saving them to the IMPB white list.\n\n Easy Access Control Policies\n The DGS-3130 Series supports authentication mechanisms such as 802.1X, Web-based Access Control (WAC), & MAC-based Access Control (MAC) for strict access control & easy deployment. After authentication, individual policies such as VLAN membership, Qo S policies, & ACL rules can be assigned to each host. In addition, the switch also supports Microsoft&174; NAP (Network Access Protection). NAP is a policy enforcement technology that helps customers protect network assets from compromised computers by enforcing compliance with network health policies.\n\n Power over Ethernet Support\n The DGS-3130-30PS & DGS-3130-54PS support industry standard IEEE 802.3at power over Ethernet across all Gigabit copper ports. They feature a total power budget of 370 W, capable of supplying up to 30 W of power per port to connected Po E-enabled devices. The Po E power budget can be increased to 740 W when the DPS-700 redundant power supply is used in conjunction. Power over Ethernet helps simplify deployment of surveillance devices & access point infrastructures by reducing cable clutter, eliminating the need for dedicated power supplies, & allowing Po E devices to be installed in remote locations.\n\n Versatile Traffic Management\n The DGS-3130 Series implements a rich set of multi-layer Qo S/ Co S features to help ensure that critical network services such as Vo IP, video conferences, IPTV, & IP surveillance are always given high priority. Traffic Shaping features guaranteed bandwidth for these services when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications. Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth & to provide better security to the backbone network. The ISM VLAN profiles allow administrators to bind or replace the pre-defined multicast registration information to subscriber ports quickly & easily.\n\n Lifetime Warranty & NBD Replacement\n D-Link offers a Lifetime Warranty & Next Business Day (NBD) hardware replacement on the DGS-3130 Series Lite Layer 3 Stackable Managed Switches to further its commitment to product quality & long-term customer confidence. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management YARP inspection Y System event log YMIB support RFC 1213; RFC 4188; RFC 1157, 2571-2576; RFC 1907; RFC 1757, 2819; RFC 2021; RFC 1398, 1643, 1650, 2358, 2665; RFC 2674 802.1p 2233, 2863 IF MIB; RFC 2618; RFC 2620; RFC 2925; RFC 2674, 4363; RFC 1065, 1066, 1155, 1156, 2578; RFC 1215; RFC 1212; RFC 1215; RFC 1157, 2571-2576; RFC 4022; RFC 4113; RFC 4293; RFC 2737 Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Fiber optic connector SFP+USB 2.0 ports quantity 1 Power connector AC-in jack Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3az, IEEE 802.3x 10G support Y Copper ethernet cabling technology 10BASE-T, 10GBASE-T, 100BASE-TX, 1000BASE-TPort mirroring Y Flow control support Y Link aggregation Y Spanning tree protocol Y Head-of-line (HOL) blocking YVLAN support Y Virtual LAN features Private VLAN, Voice VLAN, Tagged VLAN, MAC address-based VLAN, Port-based VLANNumber of VLANs 4000MAC address table 16384 entries Switching capacity 168 Gbit/s Forwarding rate 125 Mpps Number of queues 8 Jumbo frames support Y Packet buffer memory 2 MBDHCP features DHCP server, DHCP snooping, DHCP relay, DHCP client Access Control List (ACL)YAccess Control List (ACL) egress 512 Access Control List (ACL) ingress 2048IGMP snooping Y Security algorithms SNMP, SNMPv 3, SSH-2, SSL/TLSSSH/SSL support Y Loop protection YBPDU filtering/protection Y Authentication Guest VLAN, MAC-based authentication, Port-based authentication Root protection Y Password protection Y Do S attack prevention Y Queue scheduling algorithms SP, WRR+SP, Weighted Round Robin (WRR) Multicast support Y Multicast features Controllable multicast GARP VLAN Registration Protocol (GVRP)YVirtual Router Redundancy Protocol (VRRP)YRouting protocols RIPStackable Y Product colour Black, Grey LED indicators Y Number of fans 1 fan (s) Certification FCC A, CE A, VCCI A, IC, RCM, BSMI, CCCPhysical stacking (units)9 Virtual stacking (units)32 Noise level 52.5 d B Telnet Y Mean time between failures (MTBF)900546 h Redundant power supply (RPS) support YAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)30.76 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-40
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Heat dissipation 104.65 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 2.98kg





...

The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to help connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast & enhanced security features, making them an ideal Gigabit access layer solution. The DGS-3130-30TS/54TS provide 24 or 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-30PS/54PS provide 24 or 48 10/100/1000 Mbps Power over Ethernet (Po E) Gigabit Ethernet ports. The DGS-3130-30S/54S provide 24 or 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-30PS/54PS supports the IEEE 802.3af & IEEE 802.3at Po E standards. The default power budget for these models is 370 watts & can be expanded to 740 watts with the DPS-700 redundant power supply. The switches are also equipped with a USB (Universal Serial Bus) 2.0 port, allowing the user to boot images & upload configuration files directly, as well as conveniently save syslog files to an USB (Universal Serial Bus) 2.0 storage device.\n\n Enhanced Network Reliability\n The DGS-3130 Series targets enterprises & metro Ethernet applications, & customers who require a high level of network security & maximum uptime. All the models in the DGS-3130 Series support an external redundant power supply to ensure continued operation. In addition, these switches incorporate essential reliability features to enhance network resilience, including 802.1D Spanning Tree (STP), 802.1w Rapid Spanning Tree (RSTP), & 802.1s Multiple Spanning Tree (MSTP), Loopback Detection (LBD), & Broadcast Storm Control. ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) minimizes the recovery time to 50 ms. For load sharing & redundancy backup in a switch cascading/server attachment configuration, the DGS-3130 Series provides dynamic 802.3ad Link Aggregation Port Trunking.\n\n Comprehensive Security Features\n The DGS-3130 Series provides users with security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & define the port number to enhance user access control. With the DHCP Snooping feature, the switch automatically learns IP/MAC pairs by snooping DHCP packets & saving them to the IMPB white list.\n\n Easy Access Control Policies\n The DGS-3130 Series supports authentication mechanisms such as 802.1X, Web-based Access Control (WAC), & MAC-based Access Control (MAC) for strict access control & easy deployment. After authentication, individual policies such as VLAN membership, Qo S policies, & ACL rules can be assigned to each host. In addition, the switch also supports Microsoft&174; NAP (Network Access Protection). NAP is a policy enforcement technology that helps customers protect network assets from compromised computers by enforcing compliance with network health policies.\n\n Power over Ethernet Support\n The DGS-3130-30PS & DGS-3130-54PS support industry standard IEEE 802.3at power over Ethernet across all Gigabit copper ports. They feature a total power budget of 370 W, capable of supplying up to 30 W of power per port to connected Po E-enabled devices. The Po E power budget can be increased to 740 W when the DPS-700 redundant power supply is used in conjunction. Power over Ethernet helps simplify deployment of surveillance devices & access point infrastructures by reducing cable clutter, eliminating the need for dedicated power supplies, & allowing Po E devices to be installed in remote locations.\n\n Versatile Traffic Management\n The DGS-3130 Series implements a rich set of multi-layer Qo S/ Co S features to help ensure that critical network services such as Vo IP, video conferences, IPTV, & IP surveillance are always given high priority. Traffic Shaping features guaranteed bandwidth for these services when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications. Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth & to provide better security to the backbone network. The ISM VLAN profiles allow administrators to bind or replace the pre-defined multicast registration information to subscriber ports quickly & easily.\n\n Lifetime Warranty & NBD Replacement\n D-Link offers a Lifetime Warranty & Next Business Day (NBD) hardware replacement on the DGS-3130 Series Lite Layer 3 Stackable Managed Switches to further its commitment to product quality & long-term customer confidence. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management YARP inspection Y System event log YMIB support RFC 1213; RFC 4188; RFC 1157, 2571-2576; RFC 1907; RFC 1757, 2819; RFC 2021; RFC 1398, 1643, 1650, 2358, 2665; RFC 2674 802.1p 2233, 2863 IF MIB; RFC 2618; RFC 2620; RFC 2925; RFC 2674, 4363; RFC 1065, 1066, 1155, 1156, 2578; RFC 1215; RFC 1212; RFC 1215; RFC 1157, 2571-2576; RFC 4022; RFC 4113; RFC 4293; RFC 2737 Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Fiber optic connector SFP+USB 2.0 ports quantity 1 Power connector AC-in jack Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3az, IEEE 802.3x 10G support Y Copper ethernet cabling technology 10BASE-T, 10GBASE-T, 100BASE-TX, 1000BASE-TPort mirroring Y Flow control support Y Link aggregation Y Spanning tree protocol Y Head-of-line (HOL) blocking YVLAN support Y Virtual LAN features Private VLAN, Voice VLAN, Tagged VLAN, MAC address-based VLAN, Port-based VLANNumber of VLANs 4000MAC address table 16384 entries Switching capacity 168 Gbit/s Forwarding rate 125 Mpps Number of queues 8 Jumbo frames support Y Packet buffer memory 2 MBDHCP features DHCP server, DHCP snooping, DHCP relay, DHCP client Access Control List (ACL)YAccess Control List (ACL) egress 512 Access Control List (ACL) ingress 2048IGMP snooping Y Security algorithms SNMP, SNMPv 3, SSH-2, SSL/TLSSSH/SSL support Y Loop protection YBPDU filtering/protection Y Authentication Guest VLAN, MAC-based authentication, Port-based authentication Root protection Y Password protection Y Do S attack prevention Y Queue scheduling algorithms SP, WRR+SP, Weighted Round Robin (WRR) Multicast support Y Multicast features Controllable multicast GARP VLAN Registration Protocol (GVRP)YVirtual Router Redundancy Protocol (VRRP)YRouting protocols RIPStackable Y Product colour Black, Grey LED indicators Y Number of fans 1 fan (s) Certification FCC A, CE A, VCCI A, IC, RCM, BSMI, CCCPhysical stacking (units)9 Virtual stacking (units)32 Noise level 52.5 d B Telnet Y Mean time between failures (MTBF)900546 h Redundant power supply (RPS) support YAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)30.76 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-40
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Heat dissipation 104.65 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 2.98kg





...

The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to help connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast & enhanced security features, making them an ideal Gigabit access layer solution. The DGS-3130-30TS/54TS provide 24 or 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-30PS/54PS provide 24 or 48 10/100/1000 Mbps Power over Ethernet (Po E) Gigabit Ethernet ports. The DGS-3130-30S/54S provide 24 or 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-30PS/54PS supports the IEEE 802.3af & IEEE 802.3at Po E standards. The default power budget for these models is 370 watts & can be expanded to 740 watts with the DPS-700 redundant power supply. The switches are also equipped with a USB (Universal Serial Bus) 2.0 port, allowing the user to boot images & upload configuration files directly, as well as conveniently save syslog files to an USB (Universal Serial Bus) 2.0 storage device.\n\n Enhanced Network Reliability\n The DGS-3130 Series targets enterprises & metro Ethernet applications, & customers who require a high level of network security & maximum uptime. All the models in the DGS-3130 Series support an external redundant power supply to ensure continued operation. In addition, these switches incorporate essential reliability features to enhance network resilience, including 802.1D Spanning Tree (STP), 802.1w Rapid Spanning Tree (RSTP), & 802.1s Multiple Spanning Tree (MSTP), Loopback Detection (LBD), & Broadcast Storm Control. ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) minimizes the recovery time to 50 ms. For load sharing & redundancy backup in a switch cascading/server attachment configuration, the DGS-3130 Series provides dynamic 802.3ad Link Aggregation Port Trunking.\n\n Comprehensive Security Features\n The DGS-3130 Series provides users with security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & define the port number to enhance user access control. With the DHCP Snooping feature, the switch automatically learns IP/MAC pairs by snooping DHCP packets & saving them to the IMPB white list.\n\n Easy Access Control Policies\n The DGS-3130 Series supports authentication mechanisms such as 802.1X, Web-based Access Control (WAC), & MAC-based Access Control (MAC) for strict access control & easy deployment. After authentication, individual policies such as VLAN membership, Qo S policies, & ACL rules can be assigned to each host. In addition, the switch also supports Microsoft&174; NAP (Network Access Protection). NAP is a policy enforcement technology that helps customers protect network assets from compromised computers by enforcing compliance with network health policies.\n\n Power over Ethernet Support\n The DGS-3130-30PS & DGS-3130-54PS support industry standard IEEE 802.3at power over Ethernet across all Gigabit copper ports. They feature a total power budget of 370 W, capable of supplying up to 30 W of power per port to connected Po E-enabled devices. The Po E power budget can be increased to 740 W when the DPS-700 redundant power supply is used in conjunction. Power over Ethernet helps simplify deployment of surveillance devices & access point infrastructures by reducing cable clutter, eliminating the need for dedicated power supplies, & allowing Po E devices to be installed in remote locations.\n\n Versatile Traffic Management\n The DGS-3130 Series implements a rich set of multi-layer Qo S/ Co S features to help ensure that critical network services such as Vo IP, video conferences, IPTV, & IP surveillance are always given high priority. Traffic Shaping features guaranteed bandwidth for these services when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications. Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth & to provide better security to the backbone network. The ISM VLAN profiles allow administrators to bind or replace the pre-defined multicast registration information to subscriber ports quickly & easily.\n\n Lifetime Warranty & NBD Replacement\n D-Link offers a Lifetime Warranty & Next Business Day (NBD) hardware replacement on the DGS-3130 Series Lite Layer 3 Stackable Managed Switches to further its commitment to product quality & long-term customer confidence. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management YARP inspection Y System event log YMIB support RFC 1213; RFC 4188; RFC 1157, 2571-2576; RFC 1907; RFC 1757, 2819; RFC 2021; RFC 1398, 1643, 1650, 2358, 2665; RFC 2674 802.1p 2233, 2863 IF MIB; RFC 2618; RFC 2620; RFC 2925; RFC 2674, 4363; RFC 1065, 1066, 1155, 1156, 2578; RFC 1215; RFC 1212; RFC 1215; RFC 1157, 2571-2576; RFC 4022; RFC 4113; RFC 4293; RFC 2737 Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Fiber optic connector SFP+USB 2.0 ports quantity 1 Power connector AC-in jack Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3az, IEEE 802.3x 10G support Y Copper ethernet cabling technology 10BASE-T, 10GBASE-T, 100BASE-TX, 1000BASE-TPort mirroring Y Flow control support Y Link aggregation Y Broadcast storm control Y Spanning tree protocol Y Head-of-line (HOL) blocking YVLAN support Y Virtual LAN features Private VLAN, Voice VLAN, Tagged VLAN, MAC address-based VLAN, Port-based VLANNumber of VLANs 4000MAC address table 16384 entries Switching capacity 216 Gbit/s Forwarding rate 161 Mpps Number of queues 8 Jumbo frames support Y Packet buffer memory 4 MBDHCP features DHCP server, DHCP snooping, DHCP relay, DHCP client Access Control List (ACL)YAccess Control List (ACL) egress 512 Access Control List (ACL) ingress 2048IGMP snooping Y Security algorithms SNMP, SNMPv 3, SSH-2, SSL/TLSSSH/SSL support Y Loop protection YBPDU filtering/protection Y Authentication Guest VLAN, MAC-based authentication, Port-based authentication Root protection Y Password protection Y Do S attack prevention Y Queue scheduling algorithms SP, WRR+SP, Weighted Round Robin (WRR) Multicast support Y Multicast features Controllable multicast GARP VLAN Registration Protocol (GVRP)YVirtual Router Redundancy Protocol (VRRP)YRouting protocols RIPStackable Y Product colour Black, Grey LED indicators Y Number of fans 2 fan (s) Safety CB, c UL, BSMI, CCCCertification FCC A, CE A, VCCI A, IC, RCM, BSMI, CCCPhysical stacking (units)9 Virtual stacking (units)32 Noise level 51.9 d B Telnet Ys Flow Y Mean time between failures (MTBF)478258 h Redundant power supply (RPS) support YAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)50.62 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-40
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Heat dissipation 172.72 BTU/h Width 440 mm Depth 290 mm Height 44 mm Weight 3.72kg I/O ports 2 x 10GBASE-T





...

The DGS-3130 Series is a range of Lite Layer 3 Stackable Managed Switches designed to help connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast & enhanced security features, making them an ideal Gigabit access layer solution. The DGS-3130-30TS/54TS provide 24 or 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-30PS/54PS provide 24 or 48 10/100/1000 Mbps Power over Ethernet (Po E) Gigabit Ethernet ports. The DGS-3130-30S/54S provide 24 or 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-30PS/54PS supports the IEEE 802.3af & IEEE 802.3at Po E standards. The default power budget for these models is 370 watts & can be expanded to 740 watts with the DPS-700 redundant power supply. The switches are also equipped with a USB (Universal Serial Bus) 2.0 port, allowing the user to boot images & upload configuration files directly, as well as conveniently save syslog files to an USB (Universal Serial Bus) 2.0 storage device.\n\n Enhanced Network Reliability\n The DGS-3130 Series targets enterprises & metro Ethernet applications, & customers who require a high level of network security & maximum uptime. All the models in the DGS-3130 Series support an external redundant power supply to ensure continued operation. In addition, these switches incorporate essential reliability features to enhance network resilience, including 802.1D Spanning Tree (STP), 802.1w Rapid Spanning Tree (RSTP), & 802.1s Multiple Spanning Tree (MSTP), Loopback Detection (LBD), & Broadcast Storm Control. ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) minimizes the recovery time to 50 ms. For load sharing & redundancy backup in a switch cascading/server attachment configuration, the DGS-3130 Series provides dynamic 802.3ad Link Aggregation Port Trunking.\n\n Comprehensive Security Features\n The DGS-3130 Series provides users with security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & define the port number to enhance user access control. With the DHCP Snooping feature, the switch automatically learns IP/MAC pairs by snooping DHCP packets & saving them to the IMPB white list.\n\n Easy Access Control Policies\n The DGS-3130 Series supports authentication mechanisms such as 802.1X, Web-based Access Control (WAC), & MAC-based Access Control (MAC) for strict access control & easy deployment. After authentication, individual policies such as VLAN membership, Qo S policies, & ACL rules can be assigned to each host. In addition, the switch also supports Microsoft&174; NAP (Network Access Protection). NAP is a policy enforcement technology that helps customers protect network assets from compromised computers by enforcing compliance with network health policies.\n\n Power over Ethernet Support\n The DGS-3130-30PS & DGS-3130-54PS support industry standard IEEE 802.3at power over Ethernet across all Gigabit copper ports. They feature a total power budget of 370 W, capable of supplying up to 30 W of power per port to connected Po E-enabled devices. The Po E power budget can be increased to 740 W when the DPS-700 redundant power supply is used in conjunction. Power over Ethernet helps simplify deployment of surveillance devices & access point infrastructures by reducing cable clutter, eliminating the need for dedicated power supplies, & allowing Po E devices to be installed in remote locations.\n\n Versatile Traffic Management\n The DGS-3130 Series implements a rich set of multi-layer Qo S/ Co S features to help ensure that critical network services such as Vo IP, video conferences, IPTV, & IP surveillance are always given high priority. Traffic Shaping features guaranteed bandwidth for these services when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications. Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth & to provide better security to the backbone network. The ISM VLAN profiles allow administrators to bind or replace the pre-defined multicast registration information to subscriber ports quickly & easily.\n\n Lifetime Warranty & NBD Replacement\n D-Link offers a Lifetime Warranty & Next Business Day (NBD) hardware replacement on the DGS-3130 Series Lite Layer 3 Stackable Managed Switches to further its commitment to product quality & long-term customer confidence. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management YARP inspection Y System event log YMIB support RFC 1213; RFC 4188; RFC 1157, 2571-2576; RFC 1907; RFC 1757, 2819; RFC 2021; RFC 1398, 1643, 1650, 2358, 2665; RFC 2674 802.1p 2233, 2863 IF MIB; RFC 2618; RFC 2620; RFC 2925; RFC 2674, 4363; RFC 1065, 1066, 1155, 1156, 2578; RFC 1215; RFC 1212; RFC 1215; RFC 1157, 2571-2576; RFC 4022; RFC 4113; RFC 4293; RFC 2737 Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Fiber optic connector SFP+USB 2.0 ports quantity 1 Power connector AC-in jack Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3az, IEEE 802.3x 10G support Y Copper ethernet cabling technology 10BASE-T, 10GBASE-T, 100BASE-TX, 1000BASE-TPort mirroring Y Flow control support Y Link aggregation Y Broadcast storm control Y Spanning tree protocol Y Head-of-line (HOL) blocking YVLAN support Y Virtual LAN features Private VLAN, Voice VLAN, Tagged VLAN, MAC address-based VLAN, Port-based VLANNumber of VLANs 4000MAC address table 16384 entries Switching capacity 216 Gbit/s Forwarding rate 161 Mpps Number of queues 8 Jumbo frames support Y Packet buffer memory 4 MBDHCP features DHCP server, DHCP snooping, DHCP relay, DHCP client Access Control List (ACL)YAccess Control List (ACL) egress 512 Access Control List (ACL) ingress 2048IGMP snooping Y Security algorithms SNMP, SNMPv 3, SSH-2, SSL/TLSSSH/SSL support Y Loop protection YBPDU filtering/protection Y Authentication Guest VLAN, MAC-based authentication, Port-based authentication Root protection Y Password protection Y Do S attack prevention Y Queue scheduling algorithms SP, WRR+SP, Weighted Round Robin (WRR) Multicast support Y Multicast features Controllable multicast GARP VLAN Registration Protocol (GVRP)YVirtual Router Redundancy Protocol (VRRP)YRouting protocols RIPStackable Y Product colour Black, Grey LED indicators Y Number of fans 2 fan (s) Safety CB, c UL, BSMI, CCCCertification FCC A, CE A, VCCI A, IC, RCM, BSMI, CCCPhysical stacking (units)9 Virtual stacking (units)32 Noise level 51.9 d B Telnet Ys Flow Y Mean time between failures (MTBF)478258 h Redundant power supply (RPS) support YAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)50.62 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-40
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Heat dissipation 172.72 BTU/h Width 440 mm Depth 290 mm Height 44 mm Weight 3.72kg I/O ports 2 x 10GBASE-T





...

Unparalleled Flexibility Easily deployed & simple to manage, the DGS-3420 can be virtually stacked with any switch that supports D-Link′s Single IP Management (SIM) to form a multi-level network structured with backbone & centralised high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Redundant Ring Stacking Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack 1. Switches in the stack are hot-swappable to minimise network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables** allowing high bandwidth & high port densities on the already cost efficient DGS-3420 Series. Security, Performance & Availability The DGS-3420 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists & 802.1x user authentication via TACACS+ & RADIUS servers. The DGS-3420 Series offers extensive VLAN support including GVRP & 802.1Q VLAN to enhance security & performance. A robust set of L2/L3/L4 Qo S/ Co S solutions help ensure that critical network services such as Vo IP, ERP, Intranet, & video conferencing are served with proper priority. The DGS-3420 Series provides D-Link′s Safeguard Engine to increase the switch′s reliability, serviceability, & availability to prevent malicious flooding traffic caused by worms or virus infections. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, flow-based bandwidth control allows easy fine tuning of service types based on specific IP addresses or protocols. IPv 6 Technology The DGS-3420 Series also features comprehensive IPv 6 support, including IPv 6 Tunnelling, ICMPv 6, DHCPv 6, RIPng, etc. With 10-Gigabit connectivity & IPv 6 support, the DGS-3420 Series enables you to future-proof your network for cost efficiency & longevity while meeting the requirements for IPv 6 capable network devices in the coming years. D-Link Green Technology D-Link is striving to take the lead in developing innovative & power-saving technology that does not sacrifice operational performance or functionality. The DGS-3420 Series implements the D-Link Green Technology, which

Includes:: a power saving mode, smart fan, reduced heat dissipation, & cable length detection. The power saving feature automatically powers down ports that have no active link. The Smart Fan feature allows for the built-in fans to automatically turn on at a certain temperature, providing continuous, reliable & eco-friendly operation of the switch. The Time Based Po E feature allows to create a schedule when the Po E delivery can be disabled & save more energy. Features
- 24 Gigabit Po E+ ports, 4 SFP Combo ports & Four 10 Gigabit SFP+ ports
- Supports 802.3af (Po E) & 802.3at (Po E Plus) on all ports*
- Physical stacking up to 12 units, virtual up to 32
- Web-based GUI for easy management
- Comprehensive security features, including Microsoft NAP
- Comprehensive IPv 6 support
- Green technology
- Power-saving mode, time-based Po E, Smart Fans
- Limited Lifetime Warranty
- Advance Warranty Replacement (24 Hour Cross-shipment)











...

D-Link DGS-3420-52P. Switch layer: L2, Switch type: Managed. Basic switching RJ-45 Ethernet ports quantity: 52, 48, 52, Copper ethernet cabling technology: 1000BASE-T, 100BASE-T, 10BASE-T. MAC address table: 16000 entries, Supported data transfer rates: 10/100/1000 Mbps, Switching capacity: 176 Gbit/s. Management protocols: SNMP, Supported network protocols: IPv 4/IPv 6. Weight: 6.24kg ...

- Two products in one: Wireless N Gigabit router & Power Line AV 500 adapter built-in
- Wireless N technology: up to 300 Mbps
...

Wherever you are, your Mobile Cloud Companion is there for you
- use it as a travel router to gain an instant, fast wireless
...

The D-Link Cloud Router Gives You Peace of Mind When You′re Away Stay informed & protected with the Cloud Router (DIR-605L). Who says you have to be at home to keep track of your wireless network? The Cloud" is all about being able to do what you want from wherever you′re at. With Cloud Control, you can simply download D-Link′s free iPad, iPhone or Android™ mydlink™ app & do the following from anywhere:
- View Web browsing history to see what sites your kids are visiting
- See what devices are connected on your network
- Receive intrusion attempt email alerts & block unwanted devices
- Be notified when updates are available for your router Fast Wireless N 300 Speed & Great Coverage The Cloud Router also gives you a fast home network
- up to 300 Mbps 1
- for sharing broadband Internet, sharing files & more. Wireless N technology offers more speed, extended coverage & virtually no dead spots while still being compatible with previous wireless network standards. This router is ideal for medium-sized or large homes. The Cloud Router

Includes:: 4 Fast Ethernet Ports giving you the flexibility to connect wired devices to the network. The Cloud Router uses Intelligent Antenna technology to transmit multiple streams of data by bouncing multiple wireless signals off of walls enabling you to receive wireless signals in the farthest corners of your home. Easy to Install & Use With the D-Link Easy Setup Wizard, you can set up your wireless network in minutes. The wizard will guide you through a simple process to install your new hardware, connect to your network, & add new devices. It configures your Internet Service Provider (ISP) settings to quickly establish broadband Internet connectivity. In addition, the Cloud Router is Wi-Fi Protected Setup™ (WPS) certified, making it even easier to configure your wireless network & enable security. mydlink™ App With the mydlink™ app for iPhone & Android, you can quickly & easily monitor & control your home network from anywhere with Wi-Fi, 3G or 4G connection. Thanks to this app, you can monitor on-the-go... even if you don't have access to a computer. Download the free mydlink app on your iPhone, iPad, or Android™ device & you're all set to monitor your home network from anywhere
- see what websites your kids are viewing, block unwanted wireless intruders & more. The D-Link Cloud Router is the only router in its class with a Cloud app like this. Zero Configuration Enabled D-Link′s line of Cloud Routers makes setting up your D-Link Cloud Cameras & other devices* even easier with Zero Configuration technology. Connecting your D-Link camera with any router is easy
- make it even easier with your D-Link Cloud Router. Zero Configuration automatically configures & intelligently syncs your D-Link cloud camera to your mydlink account
- it′s as easy as connect & view.










...

- New Smart Beam™ technology for the best wireless signal wherever you are in your home.
- Built-in DLNA-compatible Media
...