These flexible interface cards support multiple integrated data, voice & video applications, facilitating the migration from data only as well as circuit-switched voice/video services to a packet voice/video solution Introduction The Cisco Third-generation 1-, 2-port & 4-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC3s) support data & voice applications on the Cisco 1921, 1941 & 1941W (data only), & the Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E & 3945E Integrated Services Routers. The Cisco MFT VWIC3 combines WAN-interface-card (WIC) & voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, & investment protection through its many uses. Customers who choose to integrate data & voice in multiple steps preserve their investment in a T1/E1 WAN interface because the Cisco MFT VWIC3 cards can be reused in packet voice applications. The 2 port T1/E1 MFT VWIC3 is shown below. The Cisco MFT VWIC3 interface cards add improvements over the Cisco Second-generation 1- & 2-port T1/E1 Multiflex Voice/WAN Interface Cards (MFT VWIC2s). The Cisco 2- & 4-port MFT VWIC3s enable each port to be clocked from an independent clock source for data applications. Voice applications can now be clocked independently from data applications, with all ports for voice applications clocked from a single source. The Cisco MFT VWIC3s use the ECAN on the motherboard PVDM cards with up to 128ms echo-tail length for demanding network conditions. MFT VWIC3 cards support up to 2 channel groups per T1/E1 port for serial data applications. Refer to Table 3 for all configuration options offered with the MFT VWIC3 cards. The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E & 3945E integrated services routers. The T1/E1 MFT VWIC3 cards support both T1 & E1, providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1, fractional T1, E1, & fractional E1 for both voice & WAN applications. All MFT VWIC3 modules include the drop-&-insert multiplexing capability, which eliminates costly external third-party channel service units/data service units (CSUs/DSUs) & drop-&-insert multiplexers. The Cisco MFT VWIC3 cards are offered in single-, dual- & quadruple-port versions, which can be used & then redeployed as network requirements change, thereby addressing several applications:
- T1/E1 data: The Cisco 1-, 2- & 4-port T1/E1 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1, (including structured G.703 with G.704 framing), fractional E1, & E1structured G.703 applications. To simplify remote management, these MFT VWIC3 cards integrate a fully managed DSU/CSU for T1 deployments & a fully managed DSU for E1 deployments.
- E1/G.703 data: The Cisco 1- & 2- port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1 (including structured G.703 with G.704 framing), fractional E1, & unstructured E1 (G.703) applications. To simplify remote management, the G.703 version

Includes:: a fully managed DSU. The G.703 versions also support all the capabilities on the T1/E1 versions.
- T1/E1 packet voice: The Cisco 1-, 2- & 4-port T1/E1 MFT VWIC3 (voice & WAN) versions act as a VIC, supporting packet voice applications by providing T1, fractional T1, E1, & fractional E1 connections to private branch exchanges (PBXs) & central offices, thereby enabling new services & reducing voice & fax toll charges.
- Mixed data & packet voice: The Cisco MFT VWIC3 interface cards can simultaneously support both data & voice, reducing the complexity & number of network components & facilitating a graceful migration to bandwidth-efficient packet voice.
- Mixed data & packet voice with drop & insert: The Cisco MFT VWIC3 cards can be deployed as a T1/E1 drop-&-insert multiplexer with integrated DSUs/CSUs, reducing the complexity of the network & the cost of the central-office ports by efficiently combining time-division multiplexing (TDM) voice (PBX), IP voice, & data on the same trunks. Cisco 1900, 2900 & 3900 ISR routers support drop & insert between ports over a single MFT VWIC3 card & two ports over two different MFT VWIC3s






...

In an increasingly mobile workplace, providing secure, high-speed wireless connectivity to employees & guests is more important than ever. The Cisco WAP121 Wireless-N Access Point with Po E is an easy, affordable way to improve the performance & reach of your small business network with advanced 802.11n wireless technology. This flexible solution is ideal for connecting up to 10 employees & can scale to accommodate additional users & changing business needs. Designed for today's performance-intensive applications, the Cisco WAP121 employs 802.11n wireless technology to deliver high throughput & extended range throughout your office. It features built-in quality-of-service (Qo S) features that let you prioritize bandwidth-sensitive traffic, enabling the deployment of business-quality voice over IP (Vo IP) & video applications. The Cisco WAP121 is simple to set up & use, with intuitive wizard-based configuration to get you up & running in minutes. A sleek, compact design with flexible mounting options enables the access point to smoothly blend into any small business environment. Support for Po E makes the device easy to install without the need for separate power plugs or expensive new wiring. To enhance reliability & safeguard sensitive business information, the Cisco WAP121 supports both Wired Equivalent Privacy (WEP) & Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. 802.1X RADIUS authentication helps keep unauthorized users out. For organizations that need to provide secure wireless access to employees, customers, & partners, it also provides support for separate virtual networks, with granular configuration options that let you provide the appropriate level of access for different users. With the Cisco WAP121, you can extend highly secure business-class wireless networking anywhere in the office, with the reliability & flexibility to meet changing business needs. ...

As business applications become more powerful & sophisticated, organizations are looking for new ways to extend the performance & reach of their office networks. Delivering secure, high-speed wireless connectivity to employees, partners, & guests anywhere in the office is key. The Cisco WAP321 Wireless-N Selectable-Band Access Point with Po E makes it easy to deliver advanced 802.11n wireless networking with business-class features
- at an affordable price. This flexible solution is perfect for connecting up to 20 employees & can be expanded to accommodate additional users & changing business needs. Built specifically for small businesses, the Cisco WAP321 offers selectable-band 802.11n wireless technology to deliver high throughput & extended range throughout your office. Advanced quality-of-service (Qo S) features let you prioritize traffic to support bandwidth-sensitive applications. This sophisticated control enables you to take advantage of voice over WLAN (Vo WLAN) to place or receive calls over the wireless LAN infrastructure. Designed for growing organizations, the Cisco WAP321 offers the ability to smoothly scale your network by bridging wired LANs together wirelessly, to reduce cabling & installation costs. It supports multiple Service Set Identifiers (SSIDs) to enable you to segregate traffic for different departments, users, & communication devices. For companies that need to provide secure wireless guest access, the Cisco WAP321 offers captive portal support that lets you create a wireless hotspot with visitor authentication. The Cisco WAP321 is simple to set up & use, with intuitive wizard-based configuration to get you up & running in minutes. A sleek, compact design with flexible mounting options enables the access point to smoothly blend into any small business environment. Power over Ethernet (Po E) support makes the device easy to install without the need for separate power plugs or expensive new wiring. To enhance reliability & safeguard sensitive business information data, the Cisco WAP321 supports Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. 802.1X RADIUS authentication helps keep unauthorized users out. With the Cisco WAP321, you can build on your existing network to deliver high-performance wireless access
- with the scalability you need as your business grows & evolves.

...

\n Cisco Webex Room Kit Mini video conferencing system Group video conferencing system 8 MP Ethernet LAN\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Video Conferencing Systems\n \n \n SKU:\n CS-KIT-MINI-K9\n \n \n EAN:\n 0889728165945 5054444204420\n \n \n \n \n\n Description\n \n \n Custom-designed for the huddle workstyle\n\n The Cisco Webex Room Kit Mini is an Artificial Intelligence (AI)-powered videoconferencing solution designed to easily outfit 1000s of huddle spaces with the collaboration tools typical of larger room systems.\n\n\n\n Smart meetings\n\n The Room Kit Mini has powerful integrated cameras that deliver intelligent view capabilities, such as automatic framing, while its automatic noise suppression reduces meeting disruptions.\n\n\n\n Smart presentations\n\n This video-conferencing system has dual-content sources, wireless sharing, & 4K content that produce great presentations.\n\n\n\n Join any meeting\n\n The Room Kit Mini USB (Universal Serial Bus) passthrough enables interoperability with any cloud service provider.\n\n\n\n Smart room\n\n When people use smart rooms, they count when it comes to usage metrics & resource allocation. Tight integrations with screens enhance user interactions, while APIs & macros allow meeting personalization.\n\n\n\n Registration flexibility\n\n Cisco's AI-powered video-conferencing system is built for both cloud & on-premises deployment, protecting your investment.\n \n \n\n Specifications\n \n Technical details Product type Group video conferencing system Product colour Grey Bluetooth Yes Video HD type 4K Ultra HDMegapixel 8 MPVideo formats supported H.264 Maximum frame rate 60 fps Face detection Yes Audio Noise reduction Yes Built-in speaker (s) Yes File formats Video formats supported H.264 Ports & interfaces DC-in jack Yes USB 2.0 ports quantity 2HDMI ports quantity 1 Ethernet LAN (RJ-45) ports 2 Networking Ethernet LANYes Ethernet LAN data rates 10, 100, 1000 Mbit/s Wi-Fi Yes Wi-Fi standards 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) Security algorithms SSH, SSL/TLSCamera Sensor type CMOSImage sensor size 1/4" Security Security algorithms SSH, SSL/TLSOperational conditions Storage temperature (T-T)-20
- 60 &176;CStorage relative humidity (H-H)10
- 90% Operating temperature (T-T)0
- 35 &176;COperating relative humidity (H-H)10
- 90% Power Power consumption (max)70 WAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)20 WCertificates Ro HS compliance Yes Weight & dimensions Width 500 mm Depth 77 mm Height 81 mm Weight 1.5kg Package width 605 mm Package depth 326 mm Package height 216 mm Package weight 3.2kg Packaging content Camera control unit included Yes Wall mounting kit Yes Cables included HDMIAC adapter included Yes\n \n \n\n\n\n\n\n





...

\n Cisco Webex Room Kit Mini video conferencing system Group video conferencing system 8 MP Ethernet LAN\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Video Conferencing Systems\n \n \n SKU:\n CS-KIT-MINI-K9\n \n \n EAN:\n 0889728165945 5054444204420\n \n \n \n \n\n Description\n \n \n Custom-designed for the huddle workstyle\n\n The Cisco Webex Room Kit Mini is an Artificial Intelligence (AI)-powered videoconferencing solution designed to easily outfit 1000s of huddle spaces with the collaboration tools typical of larger room systems.\n\n\n\n Smart meetings\n\n The Room Kit Mini has powerful integrated cameras that deliver intelligent view capabilities, such as automatic framing, while its automatic noise suppression reduces meeting disruptions.\n\n\n\n Smart presentations\n\n This video-conferencing system has dual-content sources, wireless sharing, & 4K content that produce great presentations.\n\n\n\n Join any meeting\n\n The Room Kit Mini USB (Universal Serial Bus) passthrough enables interoperability with any cloud service provider.\n\n\n\n Smart room\n\n When people use smart rooms, they count when it comes to usage metrics & resource allocation. Tight integrations with screens enhance user interactions, while APIs & macros allow meeting personalization.\n\n\n\n Registration flexibility\n\n Cisco's AI-powered video-conferencing system is built for both cloud & on-premises deployment, protecting your investment.\n \n \n\n Specifications\n \n Technical details Product type Group video conferencing system Product colour Grey Bluetooth Yes Video HD type 4K Ultra HDMegapixel 8 MPVideo formats supported H.264 Maximum frame rate 60 fps Face detection Yes Audio Noise reduction Yes Built-in speaker (s) Yes File formats Video formats supported H.264 Ports & interfaces DC-in jack Yes USB 2.0 ports quantity 2HDMI ports quantity 1 Ethernet LAN (RJ-45) ports 2 Networking Ethernet LANYes Ethernet LAN data rates 10, 100, 1000 Mbit/s Wi-Fi Yes Wi-Fi standards 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) Security algorithms SSH, SSL/TLSCamera Sensor type CMOSImage sensor size 1/4" Security Security algorithms SSH, SSL/TLSOperational conditions Storage temperature (T-T)-20
- 60 &176;CStorage relative humidity (H-H)10
- 90% Operating temperature (T-T)0
- 35 &176;COperating relative humidity (H-H)10
- 90% Power Power consumption (max)70 WAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)20 WCertificates Ro HS compliance Yes Weight & dimensions Width 500 mm Depth 77 mm Height 81 mm Weight 1.5kg Package width 605 mm Package depth 326 mm Package height 216 mm Package weight 3.2kg Packaging content Camera control unit included Yes Wall mounting kit Yes Cables included HDMIAC adapter included Yes\n \n \n\n\n\n\n\n





...

Features
- One ISDN BRI port (S/T interface, requires external NT1)
- Utilizes an RJ-45 connector
- Supported Onboard,


...

- Supports high-bandwidth applications with the 802.11n standard; backward compatible with 802.11b & g devices
- Connects to Power
...

Comprehensive Communication Package. A networking solution that combines telephone, wireless, & wired capabilities can be a complete solution for the office that needs everything. Part of Cisco Small Business Voice Gateways & ATAs, the WRP400 Wireless-G Broadband Router is a central hub for Wireless-G & Wireless-B connections. It also comes with four 10/100 ports for wired connections & two phone jacks for voice over Internet Protocol (Vo IP) functionality. The WRP400 uses advanced quality-of-service (Qo S) functionality to preserve the consistency & clarity of voice & video communications. It keeps your data safe by supporting WEP & WPA wireless security protocols, access limitations based on MAC & IP addresses, & a robust firewall that prevents against malicious external attacks to your network.
- Advanced implementation of voice-encoding algorithms for consistent, high-quality communication.
- Remote provisioning & in-service software upgrades for large-scale network deployment.
- An easy-to-use web configuration application that eliminates the need for a lengthy installation process.


...

The Cisco Catalyst 2960 Series Switches with Power over Ethernet (Po E) are new members of the Cisco Catalyst 2960 Series of fixed-configuration standalone switches for entry-level enterprise, midmarket, & small branch office networks. This series include two Cisco Catalyst 2960 Po E Switches & one Cisco Catalyst 2960 Powered Device (PD) switch, which receives power through a Po E input port from an upstream Po E device. The Cisco Catalyst 2960 Series with Po E allows connectivity to Ethernet powered devices including Cisco IP phones, wireless access points & video cameras. Cisco Catalyst 2960 Series with Po E models support Cisco pre-standard Po E & are IEEE 802.3af-compliant. The Cisco Catalyst 2960-24PC-L can support 24 simultaneous full-powered Po E ports at 15.4W. The Cisco Catalyst 2960-24LT-L has 24 10/100 Mbps ports with 8 simultaneous full-powered Po E ports at 15.4W. The Cisco Catalyst 2960-8TT-L has eight 10/100 ports with one 10/100/1000 Po E input port. This switch does not need a power supply & receives power through the uplink from an upstream Po E switch, providing deployment flexibility & availability. It is ideal for wiring & space-constraint applications. The power adaptor (PWR-A=) & power cord are optional & may be purchased separately. Po E eliminates the need for wall power to each Po E-enabled device & eliminates the cost for additional electrical cable & circuits that would otherwise be necessary in IP phone & WLAN deployments. Po E switches also eliminate the need for power injectors & Po E mid-spans for powering IP devices. Table 1 provides brief descriptions of the new switches. ...

Cisco Catalyst 2960 Series Switches with LAN Lite software are fixed-configuration, standalone switches that provide desktop Fast Ethernet connectivity for entry-level wiring closet & small branch-office networks. These switches simplify the migration from nonintelligent hubs & unmanaged switches to a fully scalable managed network. The LAN Lite Cisco IOS Software provides entry-level security, quality of service (Qo S), & availability capabilities while lowering the network total cost of ownership. The Cisco Catalyst 2960 LAN Lite Switches offer: -Dual-purpose uplinks for Gigabit Ethernet uplink flexibility, allowing use of either a copper or a fiber uplink; each dual-purpose uplink port has one 10/100/1000 Ethernet port & one Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a time. -Scalable & secure network management. -Baseline Network Admission Control based on users, ports, & MAC addresses. -Easy network configuration, Cisco IOS Software updates, & troubleshooting using Cisco Network Assistant software. -Qo S for traffic classification & shaping to prioritize various applications. -Single IP address, syslog, & Simple Network Management Protocol (SNMP) management for a stack of up to 16 switches. -Autoconfiguration using Smartports. -Enhanced troubleshooting for link connectivity problems & cable diagnostics. -Qo S & support for multicast services. -Software updates at no additional cost. ...