Trend VARIJIG Varijig System Adjustable Frame The Varijig from Trend is an adjustable frame & guide for use with a router for cutting rectangles & squares. Using the Varijig allows a router to cut recesses, slots & face panel moulds with a maximum working area of 600mm x 600mm. It can also be used to create panel doors for kitchens etc.

Features: Four lengths of 700mm extrusion with dual metric/imperial measuring scales Working area 600mm x 600mm.

Includes:: router anti-tilt block Cross cut accuracy to 0.1mm, a square is required to square frame before use Use with a guide bush with minimum 8mm spigot length, or use Unibase as guide Secure with standard clamps or use optional clamp kit Warranty: 12 months Comes With: 4 x Alloy Extrusion with Scales 4 x Corner brackets 1 x Anti-tilt shoe 1 x Anti tilt Shoe fixing screw



...

Trend VJS/CG/24 Varijig Clamp Guide 24 Inch

Features: For accurate guiding of router, saws & jigsaws Integral

...

Trend VJS/CG/36 Clamp Guide 36in

Features: Integral clamping jaws & a locking lever provide a quick way of

...

Trend VJS/CG/50 Varijig Clamp Guide 50 Inch The Trend Varijig 50 inch clamping guide is used for precise guiding of router, saws & jigsaws. This product is perfect for secure holding & clamping of work pieces. It is also available in three different lengths 24 inch, 36 inch & 50 inch.

Features: For precise guiding of router, saws & jigsaws Integral clamping jaws & a locking lever provide a quick way of clamping the guide batten Ideal for holding & clamping work pieces Aluminium extrusion incorporating T-slots The clamps are fitted with a metric/imperial scale for setting lengths & stop positions. Scale can be positioned by removing 20mm of the self adhesive backing Router not included Patent No. US7, 007, 731 Warranty: 12 months

...

Trend VJS/G/100 Varijig System Straight Guide 2.54 Metre Two lengths of extrusion with jointing piece to give a maximum working length of 100 inches (2540mm). Reduced length for easier transport & storage

Features: Clamps can slide along each extrusion. Maximum material clamp thickness 32mm Adjustable friction washer on clamps prevent clamp from sliding too freely One extrusion has dual metric/imperial scale Can be combined with Varijig parts Warranty: 12 months Comes With: 1 x 56" Alloy extrusion with scale 1 x 56" Alloy extrusion 1 x Connecting block 1 x Hex key 4mm 2 x Sliding clamps"

...

Trend WP-SNAP/D/5L Trend Snappy 5/64 Inch / 2.0mm Drill Long For DBG/5 Centring Guide

Features: Spare HSS drill

...

Trend WP-SNAP/D/7L Trend Snappy 7/64 Drill Long For Dbg/7

Features: Spare HSS drill bit for the SNAP/DBG/7

...

Trend WRT Floor Standing Workshop Router Table The Trend WRT is a well designed & constructed Workshop Router Table packed with the necessary features to maximise the versatility of all popular portable routers. Fitted with a large laminated MDF table & quick release aluminium extrusion back fence with sliding MDF cheeks.

Features: Removable 6.35mm thick aluminium insert plate with 98mm diameter aperture, pre drilled for Trend TBC routers & T11 routers Quick Raiser & Quick Release facility for the Trend T11 router High back fence with fully adjustable guard assembly Fully adjustable side finger pressure Front & side adjustable feather pressure guards Steel leg frame assembly with adjustable feet Two insert rings 31.8mm & 67.5mm diameter to reduce table aperture Lead on pin for bearing guided curved work Edge planing facility on back fence of 1.4mm & 2.4mm Cable management clips No volt release switch Mitre fence with zeroing & spelch block facility Router not included Comes With: 2 x Insert rings 1 x Leg stand 1 x No-volt release switch 1 x Side pressure 1 x Top pressure 1 x Mitre fence 1 x Lead-on pin 1 x Safety guard 1 x Pushstick

...

Trend ZIP/170/3 Zipbolt Worktop Connectors with Hex Bit (Pack of 3) Quick tightening bolts for kitchen worktop joint to make life easier for installer.

Features: Suits standard worktop jig bolt recess 170mm overall length Bolt balances on hex driver Strong & powerful zinc plated metal bolts Use a 5mm hex driver to tension bolt Durable diecast gear housing to allow higher torque levels saves your valuable time & money in assembling worktops Patent number EP1969240 Comes with: 3 x 170mm Zipbolts 1 x 5mm hex bit (50mm) Total length 170 mm

...

Triton JOF001 Compact Precision Plunge Router 1010W (925837) Light & exceptionally compact in design, the JOF001 is the ideal machine for freehand work. With automatic spindle lock for one-handed bit changes, & micro winder for continuous fine depth adjustment through the full plunge range, this compact precision router incorporates many of the awardwinning features of its bigger brothers
- the TRA001 & MOF001. Quick fit pins enable fast fitment & removal from the Triton RTA300 router table & the above-the-table height winder allows quick & easy fine-tuning of the depth setting when the router is table-mounted. During h&-held use, the soft start enables complete control whilst the machine powers up, & variable speed ensures the perfect speed is available for all cutter types.

Features: Compact 1010W / 11⁄2hp electronically controlled motor Single switch from plunge to fixed-base router with rack & pinion height adjustment 8000-20000rpm electronic speed maintenance under load Automatic spindle lock for single wrench bit changes 3-stage turret with direct reading scales for precise pre-set cut depths Soft start & variable speed provides the perfect speed for all cutter types Micro winder enables continuous fine depth adjustment Comes With: Table Height Winder 1⁄2" 6mm & 12mm Collet Multi-Function Fence Collet Wrench [https://www.youtube.com/watch?v= Qd Vu Mcw TWCw] Voltage: 220-240V 50 Hz Power 1010W 11⁄2hp / 9A Speed Maintenance Under Load 8000
- 20000rpm Collet 1/2", 6mm, 12mm Plunge Range 0
- 59mm 0
- 2 5⁄16" Dust Extraction Yes Weight 3.9kg 8.6lbs





...