More From Contributor

£5.59
Trend TRENDICOTE/60 PTFE Spray 60ml

Features:
Dry lubricant spray To increase saw blade & router cutter life

...
Archived Product
£20.04
Trend UNI/CS Countersink

Features:
This TCT Countersink clamps onto any drill between 3 mm & 7.2 mm in diameter

...
Archived Product
£18.00
Trend UNIBASE Universal Sub-base complete with pins & bush.

Features:
The Unibase enables routers with non-standard

...
Archived Product
£69.00
Trend VARIJIG Varijig System Adjustable Frame The Varijig from Trend is an adjustable frame & guide for use with a router for cutting rectangles & squares. Using the Varijig allows a router to cut recesses, slots & face panel moulds with a maximum working area of 600mm x 600mm. It can also be used to create panel doors for kitchens etc.

Features:
Four lengths of 700mm extrusion with dual metric/imperial measuring scales Working area 600mm x 600mm.

Includes::
router anti-tilt block Cross cut accuracy to 0.1mm, a square is required to square frame before use Use with a guide bush with minimum 8mm spigot length, or use Unibase as guide Secure with standard clamps or use optional clamp kit Warranty: 12 months Comes With: 4 x Alloy Extrusion with Scales 4 x Corner brackets 1 x Anti-tilt shoe 1 x Anti tilt Shoe fixing screw



...
Archived Product
£30.00
Trend VJS/CG/24 Varijig Clamp Guide 24 Inch

Features:
For accurate guiding of router, saws & jigsaws Integral

...
Archived Product
£39.00
Trend VJS/CG/50 Varijig Clamp Guide 50 Inch The Trend Varijig 50 inch clamping guide is used for precise guiding of router, saws & jigsaws. This product is perfect for secure holding & clamping of work pieces. It is also available in three different lengths 24 inch, 36 inch & 50 inch.

Features:
For precise guiding of router, saws & jigsaws Integral clamping jaws & a locking lever provide a quick way of clamping the guide batten Ideal for holding & clamping work pieces Aluminium extrusion incorporating T-slots The clamps are fitted with a metric/imperial scale for setting lengths & stop positions. Scale can be positioned by removing 20mm of the self adhesive backing Router not included Patent No. US7, 007, 731 Warranty: 12 months

...
Archived Product
£59.00
Trend VJS/G/100 Varijig System Straight Guide 2.54 Metre Two lengths of extrusion with jointing piece to give a maximum working length of 100 inches (2540mm). Reduced length for easier transport & storage

Features:
Clamps can slide along each extrusion. Maximum material clamp thickness 32mm Adjustable friction washer on clamps prevent clamp from sliding too freely One extrusion has dual metric/imperial scale Can be combined with Varijig parts Warranty: 12 months Comes With: 1 x 56" Alloy extrusion with scale 1 x 56" Alloy extrusion 1 x Connecting block 1 x Hex key 4mm 2 x Sliding clamps"

...
Archived Product
£5.00
Trend WP-HJ/09 Bradawl Only For Hinge/jig

Features:
Replacement bradawl only for the HINGE/JIG Does not include

...
Archived Product
£3.60
Trend WP-SNAP/D/5L Trend Snappy 5/64 Inch / 2.0mm Drill Long For DBG/5 Centring Guide

Features:
Spare HSS drill

...
Archived Product
£4.00
Trend WP-SNAP/D/7L Trend Snappy 7/64 Drill Long For Dbg/7

Features:
Spare HSS drill bit for the SNAP/DBG/7

...
Archived Product

Trend VJS/CG/36 Clamp Guide 36in

Trend VJS/CG/36 Clamp Guide 36in Features: Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten Ideal for holding and clamping work pieces and the aluminium extrusion incorporating T-slots Clamps fitted with a metric/imperial scale for setting lengths and stop positions The scale can be be positioned by removing 20mm of the self adhesive backing Net Weight: 1.282kg
RIP - This product is no longer available on our network. It was last seen on 21.11.2018

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: TRE-VJS-slash-CG-slash-36
Availability: In Stock
£34.00

Product Description

Trend VJS/CG/36 Clamp Guide 36in

Features:
Integral clamping jaws & a locking lever provide a quick way of clamping the guide batten Ideal for holding & clamping work pieces & the aluminium extrusion incorporating T-slots Clamps fitted with a metric/imperial scale for setting lengths & stop positions The scale can be be positioned by removing 20mm of the self adhesive backing Net Weight: 1.282kg

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Aluminium - Corrosion resistant lightweight metal
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Quick - Something that is fast
Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu