Makita LW1401S Portable Cut Off Saw 14 Inch / 355mm Model LW1401S is a 355mm (14") Portable Cut-off Saw & the successor to the 2414EN. The LW1401S comes in 2 voltages, the 240V has a 2200W & the 110V has a 1650W motor. Due to the design & position of the carry handle, it is relatively easy to transport around the jobsite. Replacement of abrasive wheel & adjustment of guide plate can be done with the supplied box spanner. N.B. Label on machine motor housing says LW1401 not LW1401S

Features: Large spark guard Quick release vice Carry handle for easy transport Chain locking device Double Insulation Comes With: B-19881 abrasive wheel Box spanner

...

Makita LW1401S Portable Cut Off Saw 14 Inch / 355mm Model LW1401S is a 355mm (14") Portable Cut-off Saw & the successor to the 2414EN. The LW1401S comes in 2 voltages, the 240V has a 2200W & the 110V has a 1650W motor. Due to the design & position of the carry handle, it is relatively easy to transport around the jobsite. Replacement of abrasive wheel & adjustment of guide plate can be done with the supplied box spanner. N.B. Label on machine motor housing says LW1401 not LW1401S

Features: Large spark guard Quick release vice Carry handle for easy transport Chain locking device Double Insulation Comes With: B-19881 abrasive wheel Box spanner

...

Makita M4301 MT Corded Jigsaw 240V The MT series from Makita offers a comprehensive list of tools at an affordable market price. Produced to a standard far exceeding that of the DIY market, the MT series combines industrial build quality with fundamental professional requirements, without the professional price tag. The MT series is therefore tailored to suit all discerning home-users, apprentices & trade users, who don't require all the features of a high-end professional machine, just a robust & reliable tool to get the job done. MT series tools are produced in the same worldwide Makita factories as fully fledged Makita tools, & are subject to the same stringent quality control processes.

Features: 3 orbital settings plus straight cutting Variable speed control by trigger Bevel cutting 45 degrees left & right Ergonomically designed handle with rubberised soft grip fits your hand perfectly to provide maximum control & comfort Bayonet (Universal) Shank Jigsaw Blade Connectable to dust extractor Large 2-finger trigger switch with conveniently-located lock-on button for continuous product use & increased operator comfort Hex wrench holder on body Compatible with Guide Rail

...

Makita MAC610 Air Compressor is small in design & ideal for pin nailers. Comes complete with safety valve, hose & blow gun. Available in 240 volts only.

Features: A small compressor ideal for pin nailers that would be used for picture framing or upholstery & similar craft or domestic operations Provides an adequate 8bar/116psi pressure with a 6-litre pressure tank capacity that can deliver 47 LITRE/minute Delivery pressure can be set by a simple control valve adjacent to the tank pressure gauge This quiet, handy compressor weighs just 8kg Comes with: Safety valve Coiled hose Blow gun Max. Pressure: 8bar/116psi Output Power: 1.1hp Tank Capacity: 6 litres Air Flow: 47 litres/min (1.7 cfm)

...

Makita 821549-5 Makpac 1 Connector Case with 8379481 Inlay & 1 x 3.0 Ah BL1830 Battery MAKPAC. The connector case system designed for the professional. Strong & collapsible carry handles make the connector cases easy to move & store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other & locked together with the locking latches. The interconnected cases take up less storage space & are easy to transport to & from the work site. You can select a moulded inlay to suit your machine. This inlay has room to store a DC18RC Charger & a further 3 Batteries. Makpac 1

Features: Stackable for storage & easy transportation Strong & collapsible handles Four different sizes to choose from BL1830

Features: 5x Lower self-discharge keeps battery cells active & ready for use, even after long periods of storage Built-in shock absorbing features protect the battery Sixteen (16) firm holding contact terminals reduce the risk of power loss/fluctuation in high vibration work environments   Makpac 1 Spec Connector Case (Type 1) Length: 396 mm

Width: 296 mm

Height: 105 mm Weight: 1.3kg







...

Makita ML105 10.8V LED CXT Worklight (Body Only) The Makita ML105 10.8V LED CXT Worklight provides bright illumination, versatility & convenience. The single LED bulb provides 160 lumins of light. This worklight is able to provide up to 14 hours of continuous illumination. The 12-position aluminium pivoting head provides added versatility, with a durable design engineered for job site conditions.

Features: 4.9W High-illuminance single LED Up to 14 hours of illumination with BL1040B Multifaceted reflector enables to illuminate sharp & evenly Compact aluminium flashlight head for increased durability 12 position pivoting flashlight head with positive stops from -60°to 110° Ergonomically designed handle with soft grip Strap hook included as standard equipment

...

Makita ML180 18 Volt Ni-Cd or Ni-MH Cordless Torch (Body Only) The Makita ML180 Torch 18v can be powered by either Ni MH or Ni CD batteries. It will provide light for about 180 minutes of continuous illumination from a single charge. The Makita ML180 torches can be positioned in 4 different angles allowing the head to swivel to exactly where the light is required for safer working enviroment.

Features: 3 Hours of continuous illumination from a single charge 4 Position flashlight head; 0, 45, 90, 110 Degrees Replacement bulb stored in head for convenience Uses 18V Ni-Cd & Ni-MH Battery Comes without Battery or Charger Battery Voltage: 18V (Not included) Bulb Type: Zenon Weight: 0.52kg

...

Makita Mitre Saw MLS100 10 Inch/255mm The Makita MLS100 features a compact & robust construction. For more accurate cross, mitre, bevel & compound cuts due to the precision machined aluminium base. Supplied with TCT blade, dust bag, vertical vice, triangular rule & spanner. People who bought this say: " Easy setup & simple to use." " Accurate cutting & a lot of thought on the safety aspect" " Easy to use, very effective performance." " For the price it's a very sturdy piece of kit."

Features: Powerful 1500w motor for enhanced performance, compound pivoting arm Bevel cuts up to 45° to the left mitre cuts 0-45° left & 0-52° right Positive stops at 9 settings; 15°, 22.5°, 30°, 45°, right or left & 0° (90° cuts) Precision machined aluminium base ensures accurate cuts, performs compound cutting operations Shaft lock for easy blade changes,

Includes:: 255mm 40 tooth carbide tipped blade Double insulated Electric brake Comes with: TCT saw blade Dust bag Extension arms Vertical clamp



...

Makita Mitre Saw MLS100 10 Inch/255mm The Makita MLS100 features a compact & robust construction. For more accurate cross, mitre, bevel & compound cuts due to the precision machined aluminium base. Supplied with TCT blade, dust bag, vertical vice, triangular rule & spanner. People who bought this say: " Easy setup & simple to use." " Accurate cutting & a lot of thought on the safety aspect" " Easy to use, very effective performance." " For the price it's a very sturdy piece of kit."

Features: Powerful 1500w motor for enhanced performance, compound pivoting arm Bevel cuts up to 45° to the left mitre cuts 0-45° left & 0-52° right Positive stops at 9 settings; 15°, 22.5°, 30°, 45°, right or left & 0° (90° cuts) Precision machined aluminium base ensures accurate cuts, performs compound cutting operations Shaft lock for easy blade changes,

Includes:: 255mm 40 tooth carbide tipped blade Double insulated Electric brake Comes with: TCT saw blade Dust bag Extension arms Vertical clamp



...

Makita MLT100 260mm Table Saw complete with Tungsten Carbide tipped blade, rip fence, push stick, mitre guide with vise, wrenches & triangular rule

Features: Two pole slide system for raising & lowering blade for the most efficient & smoothest adjustment of the blade depth Aluminium die cast, precision machined table top remains flat & true for out of the box accuracy Powerful motor delivers 4, 500rpm & electric brake for maximum productivity Large cutting capacity (91mm at 90

...