Makita LS1216L 305mm (12") Slide Compound Mitre Saw complete with laser, saw blade & dust bag The Makita LS1216L 12-Inch Dual Slide Compound Mitre Saw cuts pieces smoothly & quickly in all directions. All of the major components are machined from metal making this machine more durable & a viable long term investment. This saw is easy to handle, & can be used by nearly anybody. With the help of the laser system cuts are more accurate. This mitre saw also cuts through wood at a constant pressure, with a huge capacity & accuracy which allows for cleaner & more even cuts & moldings. It's so easy to set the mitre & bevel angles with simple transitioning to different angle cuts. People who bought this say, " Very happy with the saw, so easy to use." " The mitre saw cuts wood & other material in a manner that is both quick & easy."

Features: Red Laser 650 nm, 1.6m W (Laser Class 2M) DXT
- Deep & Exact Cutting Technology Deep cutting
- 3 stage reduction gear unit & movable rear blade guard provide larger capacities of cutting crown molding or skirting board Capable of diagonal cutting up to 203mm in crown molding Capable of vertical cutting up to 165mm in baseboard (skirting) Exact cutting is obtained by using 4 short poles instead of the usual 2 longer poles. This also reduces vibration & makes for more precise cutting. 6 linear ball bearings are used to support the 4 poles for smooth & precise sliding out Double sliding guide fence
- the upper & the lower sections slide independently for added convenience; each upper fence slides outwards for bevel cut & each lower fence slides inwards to securely hold small workpieces for precise & exact cutting Quick & accurate mitre angle lock
- mitre angle can be locked or unlocked by simply turning the handle 90





...

Makita LW1400 Portable Cut Off Saw 14 Inch / 355mm Model LW1400 is a 355mm (14") Portable Cut-off Saw & the successor to the 2414EN. The LW1400 has a powerful 2200W motor & due to the design & position of the carry handle, it is relatively easy to transport around the jobsite. Replacement of abrasive wheel & adjustment of guide plate can be done without any tools.

Features: Tool-less adjustment of guide plate Tool-less wheel change Large spark guard Quick release vice Carry handle for easy transport Pin locking device Double Insulation Comes With: B-19881 abrasive wheel [https://www.youtube.com/watch?v=1v Dlz Rf MUFU] Hole Diameter: 25.4 mm Max Wheel Thickness: 3 mm Noise sound pressure: 102 d B (A) Noise sound power: 110 d B (A) Noise K factor: 3 d B (A) Max Wheel Diameter: 355 mm Input Wattage 110v: 1650 w Input Wattage 240v: 2200 w No Load Speed: 3, 800 rpm Vibration K factor: 1.5 m/sec

...

Makita LW1400 Portable Cut Off Saw 14 Inch / 355mm Model LW1400 is a 355mm (14") Portable Cut-off Saw & the successor to the 2414EN. The LW1400 has a powerful 2200W motor & due to the design & position of the carry handle, it is relatively easy to transport around the jobsite. Replacement of abrasive wheel & adjustment of guide plate can be done without any tools.

Features: Tool-less adjustment of guide plate Tool-less wheel change Large spark guard Quick release vice Carry handle for easy transport Pin locking device Double Insulation Comes With: B-19881 abrasive wheel [https://www.youtube.com/watch?v=1v Dlz Rf MUFU] Hole Diameter: 25.4 mm Max Wheel Thickness: 3 mm Noise sound pressure: 102 d B (A) Noise sound power: 110 d B (A) Noise K factor: 3 d B (A) Max Wheel Diameter: 355 mm Input Wattage 110v: 1650 w Input Wattage 240v: 2200 w No Load Speed: 3, 800 rpm Vibration K factor: 1.5 m/sec

...

Makita LW1401S Portable Cut Off Saw 14 Inch / 355mm Model LW1401S is a 355mm (14") Portable Cut-off Saw & the successor to the 2414EN. The LW1401S comes in 2 voltages, the 240V has a 2200W & the 110V has a 1650W motor. Due to the design & position of the carry handle, it is relatively easy to transport around the jobsite. Replacement of abrasive wheel & adjustment of guide plate can be done with the supplied box spanner. N.B. Label on machine motor housing says LW1401 not LW1401S

Features: Large spark guard Quick release vice Carry handle for easy transport Chain locking device Double Insulation Comes With: B-19881 abrasive wheel Box spanner

...

Makita LW1401S Portable Cut Off Saw 14 Inch / 355mm Model LW1401S is a 355mm (14") Portable Cut-off Saw & the successor to the 2414EN. The LW1401S comes in 2 voltages, the 240V has a 2200W & the 110V has a 1650W motor. Due to the design & position of the carry handle, it is relatively easy to transport around the jobsite. Replacement of abrasive wheel & adjustment of guide plate can be done with the supplied box spanner. N.B. Label on machine motor housing says LW1401 not LW1401S

Features: Large spark guard Quick release vice Carry handle for easy transport Chain locking device Double Insulation Comes With: B-19881 abrasive wheel Box spanner

...

Makita MAC610 Air Compressor is small in design & ideal for pin nailers. Comes complete with safety valve, hose & blow gun. Available in 240 volts only.

Features: A small compressor ideal for pin nailers that would be used for picture framing or upholstery & similar craft or domestic operations Provides an adequate 8bar/116psi pressure with a 6-litre pressure tank capacity that can deliver 47 LITRE/minute Delivery pressure can be set by a simple control valve adjacent to the tank pressure gauge This quiet, handy compressor weighs just 8kg Comes with: Safety valve Coiled hose Blow gun Max. Pressure: 8bar/116psi Output Power: 1.1hp Tank Capacity: 6 litres Air Flow: 47 litres/min (1.7 cfm)

...

Makita 821549-5 Makpac 1 Connector Case with 8379481 Inlay & 1 x 3.0 Ah BL1830 Battery MAKPAC. The connector case system designed for the professional. Strong & collapsible carry handles make the connector cases easy to move & store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other & locked together with the locking latches. The interconnected cases take up less storage space & are easy to transport to & from the work site. You can select a moulded inlay to suit your machine. This inlay has room to store a DC18RC Charger & a further 3 Batteries. Makpac 1

Features: Stackable for storage & easy transportation Strong & collapsible handles Four different sizes to choose from BL1830

Features: 5x Lower self-discharge keeps battery cells active & ready for use, even after long periods of storage Built-in shock absorbing features protect the battery Sixteen (16) firm holding contact terminals reduce the risk of power loss/fluctuation in high vibration work environments   Makpac 1 Spec Connector Case (Type 1) Length: 396 mm

Width: 296 mm

Height: 105 mm Weight: 1.3kg







...

Makita ML102 7.2V/10.8V Cordless Lithium Ion 2-Way Lantern/ Torch (Body Only)

Features: Position adjustable
-


...

Makita ML105 10.8V LED CXT Worklight (Body Only) The Makita ML105 10.8V LED CXT Worklight provides bright illumination, versatility & convenience. The single LED bulb provides 160 lumins of light. This worklight is able to provide up to 14 hours of continuous illumination. The 12-position aluminium pivoting head provides added versatility, with a durable design engineered for job site conditions.

Features: 4.9W High-illuminance single LED Up to 14 hours of illumination with BL1040B Multifaceted reflector enables to illuminate sharp & evenly Compact aluminium flashlight head for increased durability 12 position pivoting flashlight head with positive stops from -60°to 110° Ergonomically designed handle with soft grip Strap hook included as standard equipment

...

Makita ML180 18 Volt Ni-Cd or Ni-MH Cordless Torch (Body Only) The Makita ML180 Torch 18v can be powered by either Ni MH or Ni CD batteries. It will provide light for about 180 minutes of continuous illumination from a single charge. The Makita ML180 torches can be positioned in 4 different angles allowing the head to swivel to exactly where the light is required for safer working enviroment.

Features: 3 Hours of continuous illumination from a single charge 4 Position flashlight head; 0, 45, 90, 110 Degrees Replacement bulb stored in head for convenience Uses 18V Ni-Cd & Ni-MH Battery Comes without Battery or Charger Battery Voltage: 18V (Not included) Bulb Type: Zenon Weight: 0.52kg

...