Makita DDA350 18V Cordless Angle Drill With Black Cube Bag (1 x 3.0 Ah Battery) This e Xclusive Toolstop deal consists of the Makita DDA350 Cordless Angle Drill, the 831373-8 Black Makita Cube Bag & 1 x 3.0 Ah BL1830B Battery. The compact angle head with small head height of the DDA350 allows for easy access to screws in tight spaces & the hard wearing, padded Cube Bag allows for easy transportation of materials. DDA350

Features: Keyed chuck 4 pole motor Conveniently located push button for forward & reverse High comfort grips Large trigger LED job light with afterglow 831373-8

Features: Nylon woven fabric Internal stiffening & padding Quality zips Removable internal dividers Padded shoulder strap BL1830B

Features: Lightweight & shock-absorbing Delivers 430% more working capacity during it's lifetime compared to Ni-Cad & is 40% Lighter than Ni-MH Minimal depletion of power during use or in storage over it's lifetime Foam cell technology Slide on battery Firm holding with multi contacts & shock absorbing pack Will not puncture & remains cool even in heavy use Reaches full charge in 30 minutes or less Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge PLEASE NOTE BATTERY CHARGER NOT INCLUDED DDA350: Voltage: 18 v Max. in wood: 25 mm Max. in steel: 10 mm No Load Speed: 0
- 1800 rpm Max Torque: 13.7 Nm Battery Type: Lithium-ion Vibration: Drilling: 2.5 m/sec






...

Makita DDA350Z Angle Drill 18V Cordless (Body Only) Models DDA350 have been developed as the DC version tools of Model DA3010F, featuring a compact & lightweight design obtained by using a Li-ion battery as a power unit. High power 4-pole motor for excellent drilling performance. The compact angle head with small head height allows for easy access to screws in tight spaces. The chuck on the DDA350 is keyed & the chuck key has a mounted clip which can be fixed to either side of the angle drill. A short overall length of 314mm also provides more control & manoeuverability. The easy to operate large type switch trigger with variable speed control is convenient for screwdriving. Another handy feature is the LED light with afterglow function. On pulling switch trigger the light comes on automatically before motor starts turning, it stays on for 12 seconds after trigger is released. The DDA350 will run on Makita BL1830 3.0 Ah, BL1840 4.0 Ah or BL1850 5.0 Ah Batteries.

Features: Keyed chuck 4 pole motor Conveniently located push button for forward & reverse High comfort grips Large trigger LED job light with afterglow Comes With: Side handle Chuck key [https://www.youtube.com/watch?v=pmkf H4KV29k] Voltage: 18 v Max. in wood: 25 mm Max. in steel: 10 mm No Load Speed: 0
- 1800 rpm Max Torque: 13.7 Nm Battery Type: Lithium-ion Vibration: Drilling: 2.5 m/sec


...

Makita DDA351Z Li-ion Angle Drill 18 volts complete with side handle & keyless chuck The Makita DDA351 has been developed as the battery powered version of Model DA3011F. High power to weight ratio in a compact design obtained by employing a 4 pole motor & lithium-ion battery. The compact angle head with small head height allows for easy access to screws in tight spaces. A short overall length of 314mm also provides more control & manoeuverability. The easy to operate large large type switch trigger with variable speed control is convenient for screwdriving. Another handy feature is the LED light with afterglow function. On pulling switch trigger the light comes on automatically before motor starts turning, it stays on for 12 seconds after trigger is released. the DDA351 will run on Makita BL1830 3.0 Ah or BL1840 4.0 Ah Batteries.

Features: New compact design with metal gear housing 4 pole LXT motor for enhanced performance LED light for job illumination Large lever switch for variable speed control Rubber anti-slip handle Forward/reverse rotation Electric brake Comes with: Side handle Keyless chuck Batteries or charger are NOT included Machine compatible with Makita BL1830, BL1840 & BL1850 batteries

...

Makita DDF446Z 14.4V Cordless Li-ion 2 Speed Drill Driver (Body Only) A more compact & lightweight design than BDF442 with a re-designed ergonomic grip. Comes without battery or charger & is packed in a cardboard carton.

Features: 22 minute charge time with the air cooled Makstar Optimum Charging System 4 pole motor gives a high power to weight ratio Conveniently located push button for forward & reverse variable speed trigger High comfort grips & ergonomic handle LED job light with afterglow All metal gear construction ensures high transmission durability Two speed gear box Single sleeve keyless chuck for easy bit installation & removal Voltage: 14.4V Max. in wood: 38 mm Max. in steel: 13 mm Max Torque S/H: 30/45 Nm No Load Speed: H: 0
- 1500 / L: 0
- 400 rpm Torque Settings: 16 + drill Battery Type: Li-ion Charging Time: 22 min Vibration: Drilling: 2.5 m/sec



...

Makita DDF453Z LXT 18V Cordless Drill Driver (Body Only) The Makita power tool range is a blend of tried & trusted products, together with some valuable innovations, carefully selected for the demanding needs of professional users.

Features: 2 Mechanical gears Electronic brake Forward/reverse rotation Variable speed trigger PLEASE NOTE
- video shows older model drill driver with same

Specification Machine compatible with Makita BL1830, BL1840 & BL1850 batteries




...

Makita DDF458Z 18v Cordless li-ion Compact 2-speed Drill Driver (Body Only) The Makita DDF458Z is an extremely compact tool with an overall length of 225mm (8-7/8"). It's the shortest in its class & has high power & productivity achieved with new DC motor (FD31-30). It also has enhanced dust & drip-proof performance to ensure reliable operation even under bad weather.

Features: Compact design with an overall length of only 179mm Single sleeve keyless chuck allows for easy bit installation/removal by one hand LED Job light with pre-glow function BLDC motor specially designed to provide, above all, more work amount on a single full battery charge Energy production is more efficient than brushed DC motor because of no friction loss caused by brushes, enabling lower amperage for reduced heat production & increased work amount on a single full battery charge Batteries or charger are NOT included [http://www.youtube.com/watch?v= Rvzi Y Vr K Rfo] PLEASE NOTE
- video shows older model drill driver with same

Specification Machine compatible with Makita BL1830 & BL1840 batteries Electric Brake: Yes No Load Speed: 0-1500//400 rpm Max Torque: S/H 25 / 45 Nm Battery Type: Lithium-ion Torque Settings: 16 + drill Variable Speed Control Trigger: Yes Max. in steel: 13 mm Max. in wood: 38 mm Voltage: 18 v Net weight: 1.7kg




...

Makita DDF480RMJ 18V Cordless li-ion Brushless Drill Driver (2 x 4.0 Ah Batteries) The Makita DDF480RMJ is equipped with XPT (e Xtreme Protection Technology & brushless motor which enhances the runtime of the drill.

Features: Compact overall length of 185mm 1.4 times the work amount of BDF456 on a single battery charge because of no friction loss caused by brushes XPT (e Xtreme Protection Technology)
- Enhanced dust & drip-proof design to ensure reliable operation even under bad weather Rubberized soft grip provides comfortable & sure grip Variable speed control by trigger LED job light Single sleeve keyless chuck allows for easy bit installation/removal by one hand Battery fuel gauge: The power remaining in the battery can be indicated in 3 stages simply by pushing a button 3 lights on: more than 50% of full battery capacity 2 lights on: 20% to 50% of full battery capacity 1 light on: less than 20% of full battery capacity Comes with: Battery charger 2x 4.0 Ah 18V li-ion batteries Stacking carry case [http://www.youtube.com/watch?v=ff M Ia Ylp N8I] Battery Type Li-ion Torque Settings 16 + drill Vibration K factor 1.5 m/sec


...

Makita DDF480Z 18V Cordless li-ion Brushless Drill Driver
- body only The Makita DDF480 is equipped with XPT (e Xtreme Protection
...

Makita DDF481RMJ 18V Cordless Li-ion Brushless Drill Driver complete with 2 x 4 Ah batteries, charger & Connector Kitbox The Makita DDF481RMJ is equipped with XPT (e Xtreme Protection Technology & brushless motor which enhances the runtime of the drill.

Features: Forward/reverse rotation Single sleeve keyless chuck allows for easy bit installation/removal by one hand Electric brake Twin LED job light with afterglow 2 mechanical gears Battery fuel gauge
- 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity Variable speed control by trigger Best possible ergonomic handle for drill-driver applications Compact overall length of 205mm XPT
- Extreme Protection Technology BLDC motor specially designed to provide, above all, more work amount on a single full battery charge Comes with: Battery charger 2x 4.0 Ah 18V li-ion batteries Makpac Type 2 carry case [https://www.youtube.com/watch?v=z H Fw V686 So 4] Chuck Capacity: 1.5
- 13 mm No Load Speed (Hi): 0
- 2100 rpm No Load Speed (Lo): 0
- 550 rpm Voltage: 18 v Max. in wood: 76 mm Max. in steel: 13 mm Torque Settings: 21 + drill Max. fastening torque (soft joint): 60 Nm Max. fastening torque (hard joint): 115 Nm Lock torque: 125 Nm Maximum output: 640w Battery Type: Lithium-ion Vibration K factor: 1.5 m/sec






...

Makita DDF482RMJ Drill Driver 18V Cordless LXT Li-ion with 2 x 4.0 Ah Batteries, Charger & Makpac Type 2 Connector Case The Makita DDF482 is a compact Drill Driver with an overall length of only 198mm. Although small it is packed with features like 21 different torque settings & bright twin LED joblights for working in dark conditions. It also has an all metal gearbox for a long life & a soft grip handle designed to maximise thrust right to the bit.

Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light Ergonomic soft grip handle Compact overall length of 198mm Single sleeve keyless chuck Lightweight design Battery protection circuit All metal gears Comes With: 2 x BL1840 Batteries DC18RC fast charger Belt Clip Type 2 Makpac connector case [https://www.youtube.com/watch?v= Noi Wls 8qh Ew] Battery Type Li-ion Voltage: 18V No Load Speed Hi: 0
- 1, 900 rpm Low: 0
- 600 rpm Max in Steel 13mm Max in Wood 38mm Chuck Capacity 1.5
- 13mm Torque Settings 21 + Drill Max Fastening Torque S/H 36/62 Nm Sound Pressure: 75 d B (A) Sound K Factor: 3 d B (A) Vibration: Drilling into metal: 2.5m/s 2 Vibration K Factor: 1.5 m/s 2 Net Weight 1.7kg




...