Makita DCS551 Drywall Tool with DC18RC Charger in Makpac Case (2 x 3.0 Ah Batteries) This e Xclusive Toolstop deal consists of the DCS551 150mm Metal Saw along with the DC18RC single charger & 2 BL1830B 3.0 Ah Batteries all contained in a Makpac Connector Case Type 3. DCS551

Features: Electronic current limiter Electric brake Soft start Brushless motor Ergonomically designed handle with soft grip Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation Twin LED job light with pre-glow/ after-glow functions Compact overall length of 158mm Recommended Blade: B-46296 DC18RC

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated BL1830B

Features: Lightweight & shock-absorbing Delivers 430% more working capacity during it's lifetime compared to Ni-Cad & is 40% Lighter than Ni-MH Minimal depletion of power during use or in storage over it's lifetime Foam cell technology Slide on battery Firm holding with multi contacts & shock absorbing pack Will not puncture & remains cool even in heavy use Reaches full charge in 30 minutes or less Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge Comes With: Safety Goggles Hex Key





...

Makita DCS551ZJ Metal Saw 18V LTX Brushless 150mm (Body Only) in Type 3 Makpac Connector Case Model DCS551 is a Cordless Metal Cutting Saw featuring a compact & lightweight design for high manoeuvrability & easy handling. This small saw with an overall length of only 158mm has a maximum cutting depth of 57.5mm & a long life brushless motor. This capable saw will cut a variety of metal objects including pipe, tubing, C-stud, rod, unistrut, aluminium & metal sheet. Sold without battery or charger.

Features: Electronic current limiter Electric brake Soft start Brushless motor Ergonomically designed handle with soft grip Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation Twin LED job light with pre-glow/ after-glow functions Compact overall length of 158mm Recommended Blade: B-46296 Comes With: Type 3 Makpac connector case 821551-8 TCT saw blade B-46296 Safety goggles Hex wrench

...

Makita DDA350 18V Cordless Angle Drill With Black Cube Bag (1 x 3.0 Ah Battery) This e Xclusive Toolstop deal consists of the Makita DDA350 Cordless Angle Drill, the 831373-8 Black Makita Cube Bag & 1 x 3.0 Ah BL1830B Battery. The compact angle head with small head height of the DDA350 allows for easy access to screws in tight spaces & the hard wearing, padded Cube Bag allows for easy transportation of materials. DDA350

Features: Keyed chuck 4 pole motor Conveniently located push button for forward & reverse High comfort grips Large trigger LED job light with afterglow 831373-8

Features: Nylon woven fabric Internal stiffening & padding Quality zips Removable internal dividers Padded shoulder strap BL1830B

Features: Lightweight & shock-absorbing Delivers 430% more working capacity during it's lifetime compared to Ni-Cad & is 40% Lighter than Ni-MH Minimal depletion of power during use or in storage over it's lifetime Foam cell technology Slide on battery Firm holding with multi contacts & shock absorbing pack Will not puncture & remains cool even in heavy use Reaches full charge in 30 minutes or less Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge PLEASE NOTE BATTERY CHARGER NOT INCLUDED DDA350: Voltage: 18 v Max. in wood: 25 mm Max. in steel: 10 mm No Load Speed: 0
- 1800 rpm Max Torque: 13.7 Nm Battery Type: Lithium-ion Vibration: Drilling: 2.5 m/sec






...

Makita DDA350Z Angle Drill 18V Cordless (Body Only) Models DDA350 have been developed as the DC version tools of Model DA3010F, featuring a compact & lightweight design obtained by using a Li-ion battery as a power unit. High power 4-pole motor for excellent drilling performance. The compact angle head with small head height allows for easy access to screws in tight spaces. The chuck on the DDA350 is keyed & the chuck key has a mounted clip which can be fixed to either side of the angle drill. A short overall length of 314mm also provides more control & manoeuverability. The easy to operate large type switch trigger with variable speed control is convenient for screwdriving. Another handy feature is the LED light with afterglow function. On pulling switch trigger the light comes on automatically before motor starts turning, it stays on for 12 seconds after trigger is released. The DDA350 will run on Makita BL1830 3.0 Ah, BL1840 4.0 Ah or BL1850 5.0 Ah Batteries.

Features: Keyed chuck 4 pole motor Conveniently located push button for forward & reverse High comfort grips Large trigger LED job light with afterglow Comes With: Side handle Chuck key [https://www.youtube.com/watch?v=pmkf H4KV29k] Voltage: 18 v Max. in wood: 25 mm Max. in steel: 10 mm No Load Speed: 0
- 1800 rpm Max Torque: 13.7 Nm Battery Type: Lithium-ion Vibration: Drilling: 2.5 m/sec


...

Makita DDA351Z Li-ion Angle Drill 18 volts complete with side handle & keyless chuck The Makita DDA351 has been developed as the battery powered version of Model DA3011F. High power to weight ratio in a compact design obtained by employing a 4 pole motor & lithium-ion battery. The compact angle head with small head height allows for easy access to screws in tight spaces. A short overall length of 314mm also provides more control & manoeuverability. The easy to operate large large type switch trigger with variable speed control is convenient for screwdriving. Another handy feature is the LED light with afterglow function. On pulling switch trigger the light comes on automatically before motor starts turning, it stays on for 12 seconds after trigger is released. the DDA351 will run on Makita BL1830 3.0 Ah or BL1840 4.0 Ah Batteries.

Features: New compact design with metal gear housing 4 pole LXT motor for enhanced performance LED light for job illumination Large lever switch for variable speed control Rubber anti-slip handle Forward/reverse rotation Electric brake Comes with: Side handle Keyless chuck Batteries or charger are NOT included Machine compatible with Makita BL1830, BL1840 & BL1850 batteries

...

Makita DDF453Z LXT 18V Cordless Drill Driver (Body Only) The Makita power tool range is a blend of tried & trusted products, together with some valuable innovations, carefully selected for the demanding needs of professional users.

Features: 2 Mechanical gears Electronic brake Forward/reverse rotation Variable speed trigger PLEASE NOTE
- video shows older model drill driver with same

Specification Machine compatible with Makita BL1830, BL1840 & BL1850 batteries




...

Makita DDF456Z 18 Volt Lithium-ion Cordless Drill/ Driver (Naked)

Features: 22 minute charge time with the

...

Makita DDF458Z 18v Cordless li-ion Compact 2-speed Drill Driver (Body Only) The Makita DDF458Z is an extremely compact tool with an overall length of 225mm (8-7/8"). It's the shortest in its class & has high power & productivity achieved with new DC motor (FD31-30). It also has enhanced dust & drip-proof performance to ensure reliable operation even under bad weather.

Features: Compact design with an overall length of only 179mm Single sleeve keyless chuck allows for easy bit installation/removal by one hand LED Job light with pre-glow function BLDC motor specially designed to provide, above all, more work amount on a single full battery charge Energy production is more efficient than brushed DC motor because of no friction loss caused by brushes, enabling lower amperage for reduced heat production & increased work amount on a single full battery charge Batteries or charger are NOT included [http://www.youtube.com/watch?v= Rvzi Y Vr K Rfo] PLEASE NOTE
- video shows older model drill driver with same

Specification Machine compatible with Makita BL1830 & BL1840 batteries Electric Brake: Yes No Load Speed: 0-1500//400 rpm Max Torque: S/H 25 / 45 Nm Battery Type: Lithium-ion Torque Settings: 16 + drill Variable Speed Control Trigger: Yes Max. in steel: 13 mm Max. in wood: 38 mm Voltage: 18 v Net weight: 1.7kg




...

Makita DDF480RMJ 18V Cordless li-ion Brushless Drill Driver (2 x 4.0 Ah Batteries) The Makita DDF480RMJ is equipped with XPT (e Xtreme Protection Technology & brushless motor which enhances the runtime of the drill.

Features: Compact overall length of 185mm 1.4 times the work amount of BDF456 on a single battery charge because of no friction loss caused by brushes XPT (e Xtreme Protection Technology)
- Enhanced dust & drip-proof design to ensure reliable operation even under bad weather Rubberized soft grip provides comfortable & sure grip Variable speed control by trigger LED job light Single sleeve keyless chuck allows for easy bit installation/removal by one hand Battery fuel gauge: The power remaining in the battery can be indicated in 3 stages simply by pushing a button 3 lights on: more than 50% of full battery capacity 2 lights on: 20% to 50% of full battery capacity 1 light on: less than 20% of full battery capacity Comes with: Battery charger 2x 4.0 Ah 18V li-ion batteries Stacking carry case [http://www.youtube.com/watch?v=ff M Ia Ylp N8I] Battery Type Li-ion Torque Settings 16 + drill Vibration K factor 1.5 m/sec


...

Makita DDF480Z 18V Cordless li-ion Brushless Drill Driver
- body only The Makita DDF480 is equipped with XPT (e Xtreme Protection
...