The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars & stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. Rise: 9.1" section Product Specs Bar Type: 4pc

Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Weight: 1130g / 2.49lbs section

...

The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars & stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. Rise: 9.1" section Product Specs Bar Type: 4pc

Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Weight: 1130g / 2.49lbs section

...

The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars & stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) & will not be compatible with a traditional 22.2mm stem. Rise: 9.1" section Product Specs Bar Type: 4pc

Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Weight: 1130g / 2.49lbs section shogun-image-section

...

Eclat's Strangler Bars are their first 4-piece design that was meticulously worked on to remove all the annoying issues that 4-piece bars have notoriously suffered from. The Strangler Bar utilises multiple butted tubing throughout to give these bars a strong build while shaving off weight where possible. Being oversized these Strangler bars have a 25.4mm diameter tube where the stem clamps, this increased size over the traditional 22.2mm clamp helps taller bars stay locked in place in the stem. Please note: as the Eclat Strangler 4-Piece Oversize Bar is oversized you will need a 1" OS (Oversized) stem to run it! section Product Specs Rise:  Multiple Options
Width: 29" Up Sweep: 2.5° Backsweep: 12° Bar Clamping Diameter: 25.4mm Bar Type: 4-Piece Weight: 1130g (39.9oz) section shogun-image-section
...

When Eclat came to designing its first four-piece handlebar, they really wanted to go back to the drawing board & address all the annoying issues that four piece bars have always notoriously suffered from. With larger diameter top bend for cleaner look & more resistance to bending, larger tubing at welds solves the common issue of 4pc bar fatigue by greatly increasing contact area at weld. Available in a 10" Rise. section Product Specs Bar Type: 4pc

Width: 30" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Weight: 1139g / 2.5lbs section

...

When Eclat came to designing its first four-piece handlebar, they really wanted to go back to the drawing board & address all the annoying issues that four piece bars have always notoriously suffered from. With larger diameter top bend for cleaner look & more resistance to bending, larger tubing at welds solves the common issue of 4pc bar fatigue by greatly increasing contact area at weld. Available in a 10" Rise. section Product Specs Rise:  Multiple Options
Width: 30" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: 1139g / 2.5lbs section shogun-image-section
...

The Street Tool is the Swiss-Army knife for your BMX. All the functions of the tool are hidden inside the anodized tube. Throw it in your bag & make sure you don’t lend it to anyone, as you’ll never get it back! ...

Half link Chain from Eclat. The Stroke chain features weight saving slots in the links, tough solid pins with mushroomed heads & a rust proof finish. Weight: 421g ...

Half link Chain from Éclat. The Stroke chain features weight saving slots in the links, tough solid pins with mushroomed heads & a rust proof finish. Weight: 421g / 14.8 oz ...

Half link Chain from Éclat. The Stroke chain features weight saving slots in the links, tough solid pins with mushroomed heads & a rust proof finish. Weight: 421g / 14.8 oz ...