United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Pegs
Available
-
81 Customs Grind Stunt
Pegs. The pegs fit as
standard, Razor Ultra,
JD Bug, and the Madd
MGP, Team Editions,
Nitro, Ninja and lots
more.So what makes these
Grind pegs
strongersimply -
the axle continues
through the deck, the
peg then tightens over
the axle and doesnt sit
against the thread. This
takes away the risk of
shearing and the pegs as
a result become
stronger.Contents: Pair
of Aluminum CNC turned
Pegs with Internal Thread
Peg Size - 50mm Long x
19mm Diameter Four High
Tensile Axle Bolts Four
washersInstalling the
pegs is simple. The kit
comes with 4 different
sized axles and 4
washers. Choose the
appropriate axle for your
scooter (the non-threaded
part of the axle shaft
must continue out of the
deck /forks approximately
3-4mm). Remove the back
axle from your deck,
slide the washer(s) onto
the new HT axle. Once the
axle is in place, thread
the new peg on until
tight. Hold the peg and
tighten the axle with an
allen key. Follow this
process on the front
forks and you are ready
to go
Availability: In Stock
£15.99
Available
-
81 Customs Grind Stunt
Pegs. The pegs fit as
standard, Razor Ultra,
JD Bug, and the Madd
MGP, Team Editions,
Nitro, Ninja and lots
more.So what makes these
Grind pegs
strongersimply -
the axle continues
through the deck, the
peg then tightens over
the axle and doesnt sit
against the thread. This
takes away the risk of
shearing and the pegs as
a result become
stronger.Contents: Pair
of Aluminum CNC turned
Pegs with Internal Thread
Peg Size - 50mm Long x
19mm Diameter Four High
Tensile Axle Bolts Four
washersInstalling the
pegs is simple. The kit
comes with 4 different
sized axles and 4
washers. Choose the
appropriate axle for your
scooter (the non-threaded
part of the axle shaft
must continue out of the
deck /forks approximately
3-4mm). Remove the back
axle from your deck,
slide the washer(s) onto
the new HT axle. Once the
axle is in place, thread
the new peg on until
tight. Hold the peg and
tighten the axle with an
allen key. Follow this
process on the front
forks and you are ready
to go
Availability: In Stock
£15.99
Available
-
81 Customs Grind Stunt
Pegs. The pegs fit as
standard, Razor Ultra,
JD Bug, and the Madd
MGP, Team Editions,
Nitro, Ninja and lots
more.So what makes these
Grind pegs
strongersimply -
the axle continues
through the deck, the
peg then tightens over
the axle and doesnt sit
against the thread. This
takes away the risk of
shearing and the pegs as
a result become
stronger.Contents: Pair
of Aluminum CNC turned
Pegs with Internal Thread
Peg Size - 50mm Long x
19mm Diameter Four High
Tensile Axle Bolts Four
washersInstalling the
pegs is simple. The kit
comes with 4 different
sized axles and 4
washers. Choose the
appropriate axle for your
scooter (the non-threaded
part of the axle shaft
must continue out of the
deck /forks approximately
3-4mm). Remove the back
axle from your deck,
slide the washer(s) onto
the new HT axle. Once the
axle is in place, thread
the new peg on until
tight. Hold the peg and
tighten the axle with an
allen key. Follow this
process on the front
forks and you are ready
to go
Availability: In Stock
£15.99
Available
-
81 Customs Grind Stunt
Pegs. The pegs fit as
standard, Razor Ultra,
JD Bug, and the Madd
MGP, Team Editions,
Nitro, Ninja and lots
more.So what makes these
Grind pegs
strongersimply -
the axle continues
through the deck, the
peg then tightens over
the axle and doesnt sit
against the thread. This
takes away the risk of
shearing and the pegs as
a result become
stronger.Contents: Pair
of Aluminum CNC turned
Pegs with Internal Thread
Peg Size - 50mm Long x
19mm Diameter Four High
Tensile Axle Bolts Four
washersInstalling the
pegs is simple. The kit
comes with 4 different
sized axles and 4
washers. Choose the
appropriate axle for your
scooter (the non-threaded
part of the axle shaft
must continue out of the
deck /forks approximately
3-4mm). Remove the back
axle from your deck,
slide the washer(s) onto
the new HT axle. Once the
axle is in place, thread
the new peg on until
tight. Hold the peg and
tighten the axle with an
allen key. Follow this
process on the front
forks and you are ready
to go.
Availability: In Stock
£15.99
Available
-
81 Customs Grind Stunt
Pegs. The pegs fit as
standard, Razor Ultra,
JD Bug, and the Madd
MGP, Team Editions,
Nitro, Ninja and lots
more.So what makes these
Grind pegs
strongersimply -
the axle continues
through the deck, the
peg then tightens over
the axle and doesnt sit
against the thread. This
takes away the risk of
shearing and the pegs as
a result become
stronger.Contents: Pair
of Aluminum CNC turned
Pegs with Internal Thread
Peg Size - 50mm Long x
19mm Diameter Four High
Tensile Axle Bolts Four
washersInstalling the
pegs is simple. The kit
comes with 4 different
sized axles and 4
washers. Choose the
appropriate axle for your
scooter (the non-threaded
part of the axle shaft
must continue out of the
deck /forks approximately
3-4mm). Remove the back
axle from your deck,
slide the washer(s) onto
the new HT axle. Once the
axle is in place, thread
the new peg on until
tight. Hold the peg and
tighten the axle with an
allen key. Follow this
process on the front
forks and you are ready
to go
Availability: In Stock
£15.99
Available
-
81 Customs Grind Stunt
Pegs. The pegs fit as
standard, Razor Ultra,
JD Bug, and the Madd
MGP, Team Editions,
Nitro, Ninja and lots
more.So what makes these
Grind pegs
strongersimply -
the axle continues
through the deck, the
peg then tightens over
the axle and doesnt sit
against the thread. This
takes away the risk of
shearing and the pegs as
a result become
stronger.Contents: Pair
of Aluminum CNC turned
Pegs with Internal Thread
Peg Size - 50mm Long x
19mm Diameter Four High
Tensile Axle Bolts Four
washersInstalling the
pegs is simple. The kit
comes with 4 different
sized axles and 4
washers. Choose the
appropriate axle for your
scooter (the non-threaded
part of the axle shaft
must continue out of the
deck /forks approximately
3-4mm). Remove the back
axle from your deck,
slide the washer(s) onto
the new HT axle. Once the
axle is in place, thread
the new peg on until
tight. Hold the peg and
tighten the axle with an
allen key. Follow this
process on the front
forks and you are ready
to go
Availability: In Stock
£15.99
Available
-
81 Customs Grind Stunt
Pegs. The pegs fit as
standard, Razor Ultra,
JD Bug, and the Madd
MGP, Team Editions,
Nitro, Ninja and lots
more.So what makes these
Grind pegs
strongersimply -
the axle continues
through the deck, the
peg then tightens over
the axle and doesnt sit
against the thread. This
takes away the risk of
shearing and the pegs as
a result become
stronger.Contents: Pair
of Aluminum CNC turned
Pegs with Internal Thread
Peg Size - 50mm Long x
19mm Diameter Four High
Tensile Axle Bolts Four
washersInstalling the
pegs is simple. The kit
comes with 4 different
sized axles and 4
washers. Choose the
appropriate axle for your
scooter (the non-threaded
part of the axle shaft
must continue out of the
deck /forks approximately
3-4mm). Remove the back
axle from your deck,
slide the washer(s) onto
the new HT axle. Once the
axle is in place, thread
the new peg on until
tight. Hold the peg and
tighten the axle with an
allen key. Follow this
process on the front
forks and you are ready
to go.
Availability: In Stock
£15.99
Available
-
81 Customs Grind Stunt
Pegs. The pegs fit as
standard, Razor Ultra,
JD Bug, and the Madd
MGP, Team Editions,
Nitro, Ninja and lots
more.So what makes these
Grind pegs
strongersimply -
the axle continues
through the deck, the
peg then tightens over
the axle and doesnt sit
against the thread. This
takes away the risk of
shearing and the pegs as
a result become
stronger.Contents: Pair
of Aluminum CNC turned
Pegs with Internal Thread
Peg Size - 50mm Long x
19mm Diameter Four High
Tensile Axle Bolts Four
washersInstalling the
pegs is simple. The kit
comes with 4 different
sized axles and 4
washers. Choose the
appropriate axle for your
scooter (the non-threaded
part of the axle shaft
must continue out of the
deck /forks approximately
3-4mm). Remove the back
axle from your deck,
slide the washer(s) onto
the new HT axle. Once the
axle is in place, thread
the new peg on until
tight. Hold the peg and
tighten the axle with an
allen key. Follow this
process on the front
forks and you are ready
to go.
Availability: In Stock
£15.99
Denmark