The Stage Strap Kit cylinder rigging from Dive Rite helps you to set your secondary stage cylinder up properly for many years of technical SCUBA diving. 5/8" Tubular Webbing covers the tank clamp to prevent sharp edges & protect your cylinder from abrasion.  Rugged EPDM Rubber hose retainer helps to prevent rolling & features a large webbing loop which makes it easy to grip even with thick gloves on. The hose retainer has the perfect amount of stretch to allow the hose to be tucked in without any risk of it accidentally working its way back out again.  Marine Grade Stainless Steel clips & hardware are saltwater ready & corrosion resistant. A Length of Plastic Tubing provides abrasion protection to the carry strap & also forms a more comfortable carrying grip. Features 1 inch nylon webbing strap with 998kg tensile strength Neoprene-infused elastic hose retainer band resists rolling, tearing & abrasion Marine grade stainless steel cylinder clamps & hardware are saltwater ready & resistant to corrosion 1 inch tubular webbing, provides diver/tank clamp abrasion protection Specifications Small: Suitable for cylinders 27cm circumference up to 45cm Large: Suitable for cylinders 48cm circumference up to 59cm ...

The Stage Strap Kit cylinder rigging from Dive Rite helps you to set your secondary stage cylinder up properly for many years of technical SCUBA diving. 5/8" Tubular Webbing covers the tank clamp to prevent sharp edges & protect your cylinder from abrasion.  Rugged EPDM Rubber hose retainer helps to prevent rolling & features a large webbing loop which makes it easy to grip even with thick gloves on. The hose retainer has the perfect amount of stretch to allow the hose to be tucked in without any risk of it accidentally working its way back out again.  Marine Grade Stainless Steel clips & hardware are saltwater ready & corrosion resistant. A Length of Plastic Tubing provides abrasion protection to the carry strap & also forms a more comfortable carrying grip. Features 1 inch nylon webbing strap with 998kg tensile strength Neoprene-infused elastic hose retainer band resists rolling, tearing & abrasion Marine grade stainless steel cylinder clamps & hardware are saltwater ready & resistant to corrosion 1 inch tubular webbing, provides diver/tank clamp abrasion protection Specifications Small: Suitable for cylinders 27cm circumference up to 45cm Large: Suitable for cylinders 48cm circumference up to 59cm ...

The unique cutting shears from Dive Rite are the Titanium Trauma Shears that are designed to be carried by divers for cutting wire or fishing nets. The Dive Rite Shears snap into the pocket through daisy chain loops & will not come unclasped whilst diving as the clips are rugged. The Trauma Shears have a quick release system with the velcro lanyard which ensures the knife is kept securely in place.  Titanium is a highly resistant metal alloy that does not rust yet is stronger than traditional steel. Traditional steel dive knives tend to require continual maintenance of cleaning & coating in silicone to avoid rusting. Titanium alloy knives such as this one don't need this, although you should still wash & clean with fresh water after diving & dry normally to ensure longevity. Features Quick release Nylon webbing pouch Specifications Weight: 108g with pouch 8 inch shears Titanium coated 440 grade stainless steel blade ...

The Dive Rite Transpac XT Harness is a padded harness & soft backplate that is made to feel more like a rucksack than a clunky backplate. Designed by divers who have to carry equipment a long way too & from the dive site the Transpac is made for comfort in & out of the water with singles or twins. Features Soft backplate constructed of 1000 denier ballistic nylon for maximum tear & abrasion resistance Marine grade stainless sideplates provide custom fit & performance depending on placement at waist Shoulder straps feature pivot rings at chest level for load distribution & acetyl resin quick release buckles for easy doff & don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations. Two-inch (50 mm) nylon webbing rated at 7, 000 pounds breaking strength forms the shoulder & waist straps. Dual, 36-inch cam straps with lightweight marine stainless buckles Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness & provide maximum security. Weight Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg) Made in the U.S.A. Specifications Adjusting the Trans Pac XT for Double Tank Diving  ...

The Dive Rite Transpac XT Harness is a padded harness & soft backplate that is made to feel more like a rucksack than a clunky backplate. Designed by divers who have to carry equipment a long way too & from the dive site the Transpac is made for comfort in & out of the water with singles or twins. Features Soft backplate constructed of 1000 denier ballistic nylon for maximum tear & abrasion resistance Marine grade stainless sideplates provide custom fit & performance depending on placement at waist Shoulder straps feature pivot rings at chest level for load distribution & acetyl resin quick release buckles for easy doff & don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations. Two-inch (50 mm) nylon webbing rated at 7, 000 pounds breaking strength forms the shoulder & waist straps. Dual, 36-inch cam straps with lightweight marine stainless buckles Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness & provide maximum security. Weight Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg) Made in the U.S.A. Specifications Adjusting the Trans Pac XT for Double Tank Diving  ...

The Dive Rite Transplate Harness is a backplate harness with padded shoulder straps that can be adjusted & unclipped for quick adjustment with the same personalisation options as a single piece harness.   Features Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear & abrasion resistance. Two-inch (50mm) nylon webbing rated at 7, 000 lbs breaking strength forms the shoulder straps & waist strap. Four 2-inch D-rings on each shoulder strap are slightly bent for enhanced access & placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations. Marine Grade 316 stainless steel hardware is used throughout including: (2) bent D-rings on each shoulder strap (except MED that has only 1 bent D-ring per shoulder) & (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, & side plates. Shoulder straps feature pivot rings at chest level for comfort, fit, & load distribution. Acetyl resin engineered plastic quick release buckles on shoulders for easy doff & don. One-inch nylon webbing rated at 2, 200 lbs breaking strength & a Delrin 1-inch quick release buckle are used for a chest strap. Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit & performance. Specifications Backplate sold separately, pictured for illustration purposes only ...

The Dive Rite Travel EXP is a lightweight wing designed for single-tank, warm water diving. The Travel series of wings are small-profile & ideal for travel & divers who wear a minimal amount of weight. At 25lbs/11.3kg of lift, the Travel can accommodate one 80ft 3/12 L tank with no more than 16lbs. of additional weight.  Donut Shape With its donut-shape, the Travel wing provides greater stability & control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides & bottom, which improves buoyancy control & promotes a more efficient, horizontal trim. Specifications 111N ...

The Dive Rite Voyager EXP is an outstanding wing for single-tank diving with it's low-profile, donut-shape design. Streamlined side panels & a minimalist, oval shape create a higher-lift wing that remains unobtrusive instead of bulky. This is ideal for divers with larger statures or those who dive in cold water and/or require more weight. The Voyager accommodates up to one 95ft 3/15 L tank with 35lbs/15.8kg of lift. Specifications 155N ...

The Dive Rite XT Lite Backplate is a skeleton stainless steel backplate with all the strength & size of a full backplate but with reduced weight. Plenty of attachment points give you the option of adding a buttplate, crotch straps, bungees or anything you could need for your rig.   Specifications Weight 1.2kg Spine Hole Distance from Top, 25mm 50mm 293-341mm Crotch Strap Slot Width: 2" ...

The Dive Rite XT Nomad Sidemount Regs are a dedicated set of sidemount regulators with twin swivel first stages & ambidextrous second stages with short single gauges.  Swivel 1st Stages Each first stage has x 2 High Pressure Ports on the main body & x 4 Low Pressure Ports on a swivelling turret with a 5th Low Pressure Port on the end for incredible flexibility for rigging each stage.  Ambidextrous 2nd Stages Each second stage can be reconfigured to have the hose connect to the left or right hand side of the second stage & each is fitted with a 120° elbow. The short hosed second stage is fitted with a bungee necklace & the long hosed second stage is fitted with a bolt snap to secure it in place when not needed.  Big SPGs Tough & simple SPGs are fitted to 6" High Pressure hoses that can be routed however you want them, up, down or folded back on themselves. Features XT1 First Stage QTY:2 XT2 Second Stage, right-hand XT2 Second Stage, left-hand 60-inch braided Airflex LP hose 22-inch braided Airflex LP hose Right angle regulator adapter QTY:2 Compact 6-inch SPG with boot QTY:2 Regulator necklace Small swivel bolt snap Hose clip retainer Dive Rite Regulator Bag Included ...