The Dive Rite Frameless Mask is a smart & simple black skirted mask with a slim profile & smaller internal volume.  By bonding the tempered glass lens directly to the silicone skirt the mask doesn't need a bulky frame so the lens can be closer to your face for a lower internal volume & wider field of vision. WHO'S THE FRAMELESS MASK FOR? Any diver or snorkeller who wants a simple mask with minimal bulk & a wide field of vision.  The black frameless design is prefered by advanced technical divers but is suitable for anybody. RECOMMENDED ACCESSORIES A simple black mask will match a simple black snorkel like the  Dual. All masks require preparation & treatment to remove contaminants on the lens like release agents & sunblock. A brand new mask will need preparation with something like  Sea Buff and before every dive a quick  Defog Spray will keep your mask from fogging up. For comfort & protection we recommend a neoprene  Strap Wrap and our  Protective Case to keep the mask safe at all times. About Dive Rite Dive Rite is a pioneer in the SCUBA diving equipment industry. Some of Dive Rite's very first products include the first wing solely dedicated for doubles & the first commercially available back plate.   ...

The Dive Rite Line Cutter is a simple Z knife that is safer & sharper than a traditional knife thanks to it's covered 420 surgical grade stainless steel blade. Quick, easy & small the line cutter can be mounted vertically or horizontally on any strap up to 2 inches wide.  Safe The hooked design protects the blade from damaging anything you do not want to cut. The sharp blade can easily cut through braided line, mono-filament or webbing so you don't need a sawing action to cut through anything. The knife stores in a nylon sheath with a Velcro strap to hold the knife when not in use. Features User changeable blade Specifications AC3208 blade ...

The Dive Rite LTZ is a tough, comprehensive sidemount system that has a one-size-fits-all harness & a low profile bladder that's protected by a durable Super Fabric material. Streamlined & adaptable the LTZ is at home on a quite reef or pushing through a tight cave system.   Super Fabric Shell The outer shell of the bladder is made from an extremely durable material with an armoured pattern that protects the separate internal bladder so you don't have to worry about the cave ceiling or rubbing tight squeezes in a wreck. All of the valves to the bladder fit to the inside for protection also & the bladder wraps around the body thanks to the waistband & bungees fixing to the edges of the bladder to hold it closer to the body.   One-Size-Fits-All Each part of the harness can be adjusted to your size requirements for a sleek shape over your body. The corrugated inflator can be swapped from one side of the bladder to the other depending on your preference & tucks in under your arm to attach to your chest.   ...

The Stage Strap Kit cylinder rigging from Dive Rite helps you to set your secondary stage cylinder up properly for many years of technical SCUBA diving. 5/8" Tubular Webbing covers the tank clamp to prevent sharp edges & protect your cylinder from abrasion.  Rugged EPDM Rubber hose retainer helps to prevent rolling & features a large webbing loop which makes it easy to grip even with thick gloves on. The hose retainer has the perfect amount of stretch to allow the hose to be tucked in without any risk of it accidentally working its way back out again.  Marine Grade Stainless Steel clips & hardware are saltwater ready & corrosion resistant. A Length of Plastic Tubing provides abrasion protection to the carry strap & also forms a more comfortable carrying grip. Features 1 inch nylon webbing strap with 998kg tensile strength Neoprene-infused elastic hose retainer band resists rolling, tearing & abrasion Marine grade stainless steel cylinder clamps & hardware are saltwater ready & resistant to corrosion 1 inch tubular webbing, provides diver/tank clamp abrasion protection Specifications Small: Suitable for cylinders 27cm circumference up to 45cm Large: Suitable for cylinders 48cm circumference up to 59cm ...

The Stage Strap Kit cylinder rigging from Dive Rite helps you to set your secondary stage cylinder up properly for many years of technical SCUBA diving. 5/8" Tubular Webbing covers the tank clamp to prevent sharp edges & protect your cylinder from abrasion.  Rugged EPDM Rubber hose retainer helps to prevent rolling & features a large webbing loop which makes it easy to grip even with thick gloves on. The hose retainer has the perfect amount of stretch to allow the hose to be tucked in without any risk of it accidentally working its way back out again.  Marine Grade Stainless Steel clips & hardware are saltwater ready & corrosion resistant. A Length of Plastic Tubing provides abrasion protection to the carry strap & also forms a more comfortable carrying grip. Features 1 inch nylon webbing strap with 998kg tensile strength Neoprene-infused elastic hose retainer band resists rolling, tearing & abrasion Marine grade stainless steel cylinder clamps & hardware are saltwater ready & resistant to corrosion 1 inch tubular webbing, provides diver/tank clamp abrasion protection Specifications Small: Suitable for cylinders 27cm circumference up to 45cm Large: Suitable for cylinders 48cm circumference up to 59cm ...

The Dive Rite Transpac XT Harness is a padded harness & soft backplate that is made to feel more like a rucksack than a clunky backplate. Designed by divers who have to carry equipment a long way too & from the dive site the Transpac is made for comfort in & out of the water with singles or twins. Features Soft backplate constructed of 1000 denier ballistic nylon for maximum tear & abrasion resistance Marine grade stainless sideplates provide custom fit & performance depending on placement at waist Shoulder straps feature pivot rings at chest level for load distribution & acetyl resin quick release buckles for easy doff & don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations. Two-inch (50 mm) nylon webbing rated at 7, 000 pounds breaking strength forms the shoulder & waist straps. Dual, 36-inch cam straps with lightweight marine stainless buckles Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness & provide maximum security. Weight Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg) Made in the U.S.A. Specifications Adjusting the Trans Pac XT for Double Tank Diving  ...

The Dive Rite Transpac XT Harness is a padded harness & soft backplate that is made to feel more like a rucksack than a clunky backplate. Designed by divers who have to carry equipment a long way too & from the dive site the Transpac is made for comfort in & out of the water with singles or twins. Features Soft backplate constructed of 1000 denier ballistic nylon for maximum tear & abrasion resistance Marine grade stainless sideplates provide custom fit & performance depending on placement at waist Shoulder straps feature pivot rings at chest level for load distribution & acetyl resin quick release buckles for easy doff & don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations. Two-inch (50 mm) nylon webbing rated at 7, 000 pounds breaking strength forms the shoulder & waist straps. Dual, 36-inch cam straps with lightweight marine stainless buckles Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness & provide maximum security. Weight Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg) Made in the U.S.A. Specifications Adjusting the Trans Pac XT for Double Tank Diving  ...

The Dive Rite Transpac XT Harness is a padded harness & soft backplate that is made to feel more like a rucksack than a clunky backplate. Designed by divers who have to carry equipment a long way too & from the dive site the Transpac is made for comfort in & out of the water with singles or twins. Features Soft backplate constructed of 1000 denier ballistic nylon for maximum tear & abrasion resistance Marine grade stainless sideplates provide custom fit & performance depending on placement at waist Shoulder straps feature pivot rings at chest level for load distribution & acetyl resin quick release buckles for easy doff & don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations. Two-inch (50 mm) nylon webbing rated at 7, 000 pounds breaking strength forms the shoulder & waist straps. Dual, 36-inch cam straps with lightweight marine stainless buckles Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness & provide maximum security. Weight Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg) Made in the U.S.A. Specifications Adjusting the Trans Pac XT for Double Tank Diving  ...

The Dive Rite Transplate Harness is a backplate harness with padded shoulder straps that can be adjusted & unclipped for quick adjustment with the same personalisation options as a single piece harness.   Features Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear & abrasion resistance. Two-inch (50mm) nylon webbing rated at 7, 000 lbs breaking strength forms the shoulder straps & waist strap. Four 2-inch D-rings on each shoulder strap are slightly bent for enhanced access & placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations. Marine Grade 316 stainless steel hardware is used throughout including: (2) bent D-rings on each shoulder strap (except MED that has only 1 bent D-ring per shoulder) & (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, & side plates. Shoulder straps feature pivot rings at chest level for comfort, fit, & load distribution. Acetyl resin engineered plastic quick release buckles on shoulders for easy doff & don. One-inch nylon webbing rated at 2, 200 lbs breaking strength & a Delrin 1-inch quick release buckle are used for a chest strap. Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit & performance. Specifications Backplate sold separately, pictured for illustration purposes only ...

The Dive Rite Travel EXP is a lightweight wing designed for single-tank, warm water diving. The Travel series of wings are small-profile & ideal for travel & divers who wear a minimal amount of weight. At 25lbs/11.3kg of lift, the Travel can accommodate one 80ft 3/12 L tank with no more than 16lbs. of additional weight.  Donut Shape With its donut-shape, the Travel wing provides greater stability & control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides & bottom, which improves buoyancy control & promotes a more efficient, horizontal trim. Specifications 111N ...