The Lykos 5ft integrated LED batten light with 3-hour emergency function has been designed as a direct replacement for single T5 & T8 linear outdoor fluorescent luminaires. Consuming only 30W to provide 3000 lumens, this single LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos single LED batten light comes with a 30W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation.A built-in emergency battery has a discharge time of at least 3 hours, making it ideal in scenarios such as power cuts or other low light scenarios. The supplied battery takes 16 hours to fully charge & has a handy green light indicator to show when the battery is charged. An integrated "self-test" button provides the ability to test the emergency mode. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

The Lykos 5ft high output integrated LED batten light has been designed as a direct replacement for twin T5 & T8 linear outdoor fluorescent luminaires. Consuming only 60W to provide 6000 lumens, this high output LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos twin LED batten light comes with a 60W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

The Lykos 6ft high output integrated LED batten light has been designed as a direct replacement for twin T5 & T8 linear outdoor fluorescent luminaires. Consuming only 80W to provide 8000 lumens, this high output LED non-corrosive fitting is an ultra-energy-efficient choice for industrial environments such as garages, public car parks, workshops & food preparation areas which require tough, weatherproof fittings. This Lykos twin LED batten light comes with a 80W integrated LED strip with a 50, 000 hour rate life, meaning it will be years before the fitting will need to be replaced while also removing the need for maintenance, subsequently costs. The tri-proof fitting is constructed from an IK08 impact rated moisture & acid-resistant ABS body with polycarbonate diffuser. With an IP65 rating, it is suitable for indoor & outdoor use making it ideal use in areas where a tough robust led batten light is required. The stainless steel anti-tamper clips mean that this fitting is also vandal proof. Installation is simple thanks to the two loop-through continuous feed terminal blocks (with continuous live feed). This saves an incredible amount of time, especially with projects requiring multiple fittings to be installed, as the loop-in/loop-out terminals make it possible to wire directly from fitting-to-fitting. Another great feature is the colour changing technology (CCT), which means that you can select from warm white, cool white or daylight light outputs. Simply pre-select the colour temperature that you desire before installation. The Phoebe Lykos LED batten light fitting is suitable for conduit, surface, or suspension mounting. ...

Male-Male Link Lead for Phoebe LED Mini Link-Light The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This male-male lead means that you can connect your link-lights over a 500mm space, meaning you can run two link-lights in parallel with each other or leave a gap between two linear sections. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features Suitable for use only with the Phoebe LED Mini Link-Light system 500mm length Male-male connector ...

Phoebe LED Melana Round Bulkhead 15W IP66 MW Sensor White This surface mounted LED bulkhead features an integrated microwave sensor that allows the light to activate when it detects a presence nearby. It's perfect for offices & hotel corridors, or any commercial or hospitality environment where energy efficiency is a priority. It is also weatherproof, so can be used safely outdoors. The Melana bulkhead features a loop-in loop-out connection terminal for simple installation. Once fitted, it emits a bright 1300 lumens of crisp 4000K cool white light, & its wide 110° beam angle means it can light larger rooms & corridors efficiently. The integrated microwave sensor will trigger the light when a presence is detected nearby, & it will automatically dim to 10% of its full light output after 30 seconds of no detection. This efficiency adds to the natural energy saving benefits of LED lighting to provide real long-term cost benefits. Constructed from durable polycarbonate, the Melana has a clean white finish & opal diffuser that softens the light & reduces glare. Its IP66 rating means it is fully protected from the elements, so it can be used in outdoor spaces like gardens & courtyards (see our guide to IP ratings for more information). Its tough IK10 impact rating means that you can install it in busy areas safe in the knowledge that it will be protected from knocks, while a built-in safety isolating control gear protects the luminaire from short circuits. Please note, this light is not suitable for dimming. Features 15W surface mounted LED bulkhead Integrated microwave sensor Automatically dims to 10% when there is no presence nearby 35, 000 hours average rated life 50, 000 switching cycles 1300 lumens IP66 rated Instant full light 110° beam angle 240V Not suitable for dimming ...

Phoebe LED Melana 18W LED Bulkhead with Microwave Sensor This surface mounted LED bulkhead from Phoebe LED features a tri-colour switch that means that you can change the colour temperature of the light at the point of installation. The three colour options are 3000K warm white, 4000K cool white, & 5000K extra cool white. The Melana is also built with an integrated microwave sensor that allows the bulkhead to illuminate automatically when a presence is detected. The sensor has a 140° angle & 5-7 metre detection range. The light operates at its full output as long as it detects a presence, & will dim to 10% after 30 seconds of no detection. It is well-suited to hotel & hospital corridors where footfall is intermittent. The bulkhead emits a bright 1700 lumens at its full output, in any of its colour modes, & its opal diffuser softens the light & reduces glare. It is IP54 rated, so it can be used in bathrooms, while its robust polycarbonate construction & long 40, 000 hour life make the Melana a reliable, cost efficient alternative to traditional fluorescent lighting. Features 18W LED bulkhead Integrated microwave sensor Sensor has a 5-7 metre detection range & 140° angle Tri-colour switch: 3000K, 4000K, or 5000K 40, 000 hours life 20, 000 switching cycles 1700 lumens IP54 rated Instant full light 120° beam angle Not suitable for dimming ...

Microwave sensor with adjustable detection area, range, hold-time, daylight threshold, st&-by period & dimming level. For use with SKU: SL6205, SL6206 & SL6207. Separate remote control unit part number SL6426 required to adjust settings. ...

Phoebe LED Manto 2 4ft Integrated Fitting IP65 2000lm This durable, energy efficient LED fitting from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which are especially helpful with projects requiring installing multiple fittings, as those terminals make it possible to wire directly from fitting-to-fitting saving an incredible amount of time. Microwave Sensor in this fitting saves plenty of energy by allowing users to set movement detection range between 5m & 10m & time the light stays on after detecting a movement from 5 seconds to 30 minutes. When no movement is detected light output dims to 10% of its full light output capability. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 2000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. This luminaire is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 4-foot length Microwave Sensor Loop-through continuous live feed 5m-10m detection range 5secs-30min hold time 2-2000lux light sensitivity IP65 rated
- suitable for outdoor use IK07 impact rating 2000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra≥80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Manto 2 5ft Integrated Fitting IP65 3000lm This durable, energy efficient LED fitting from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which are especially helpful with projects requiring installing multiple fittings, as those terminals make it possible to wire directly from fitting-to-fitting saving an incredible amount of time. Microwave Sensor in this fitting saves plenty of energy by allowing users to set movement detection range between 5m & 10m & time the light stays on after detecting a movement from 5 seconds to 30 minutes. When no movement is detected light output dims to 10% of its full light output capability. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 3000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. This luminaire is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 5-foot length Microwave Sensor Loop-through continuous live feed 5m-10m detection range 5secs-30min hold time 2-2000lux light sensitivity IP65 rated
- suitable for outdoor use IK07 impact rating 3000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra ≥ 80 Not suitable for dimming 5 year LED limited warranty
...

Phoebe LED Manto 2 4ft Integrated Fitting IP65 Batten 4000lm Microwave This durable, energy efficient LED fitting from Phoebe LED is designed to replace traditional fluorescent tubes & battens, & is ideal for industrial environments, garages, workshops & food preparation areas. The main unique feature of Manto 2 are two loop-through continuous feed terminal blocks which are especially helpful with projects requiring installing multiple fittings, as those terminals make it possible to wire directly from fitting-to-fitting saving an incredible amount of time. Microwave Sensor in this fitting saves plenty of energy by allowing users to set movement detection range between 5m & 10m & time the light stays on after detecting a movement from 5 seconds to 30 minutes. When no movement is detected light output dims to 10% of its full light output capability. The batten is constructed from tough polycarbonate & has an IK07 impact rating, meaning it is well-protected from knocks. It is also IP65 rated, so it can be used in outdoor areas. It emits a bright 4000 lumens of cool white 4000K light with a wide 120° beam angle, perfect for busy work areas. This luminaire is suitable for a surface, conduit, & suspension mounting. Its long 50, 000-hour life means that once it is installed, it will be years before it needs replacing again. This is a particular benefit if the luminaire is in a difficult to access location. Features 4-foot length 2-2000lux light sensitivity 5m-10m detection range 5secs-30min hold time 40W Microwave Sensor Loop-through continuous live feed IP65 rated
- suitable for outdoor use IK07 impact rating 4000 lumens 100, 000 switching cycles 120° beam angle 50, 000 hours life Polycarbonate construction Non-corrosive Suitable for conduit, surface or suspension mounting Internal terminal block for safety 4000K cool white colour temperature Colour rendering index Ra ≥ 80 Not suitable for dimming 5 year LED limited warranty
...