Introducing the Phoebe LED Firesafe All-in-One Integrated LED Downlight, a versatile lighting solution that will revolutionize your indoor space. This all-in-one IP65 fire-rated LED downlight features a front-facing tri-colour selection switch (behind the front bezel) & provides a smooth, dimmable operation. With a 60 beam angle & flicker-free light output, you can enjoy a seamless lighting experience for any room including bathrooms & kitchens. The Phoebe LED downlight comes with two stylish interchangeable bezels in white & brushed nickel effect. The bezels are held in place magnetically & can be simply popped-off & easily changed to match your décor.in addition, each LED downlight

Includes:: a constant current driver for high performance that features a loop-in/loop-out tool-less wiring connector for easy installation. The tri-colour selection switch means that you can change the light colour between 3000K warm white, 4000K cool white, or 6500K daylight colour temperature, making it easy to customise your lighting to suit your mood or occasion. Thanks to Duo Dim™ Technology, this product is fully dimmable & compatible with a wide range of leading & trailing edge dimmers. Fire rated downlights are designed to protect against the spread of fire by maintaining the ceiling's fire resistance. To achieve this, they have a built-in intumescent material that expands when exposed to heat, effectively sealing the hole cut into the ceiling. However, if insulation is placed over the fitting, it can reduce the downlight's ability to dissipate heat & potentially cause the intumescent material to fail. This is where the in-built insulation guards of the Phoebe LED Firesafe All-in-One Integrated LED Downlight come in. They help maintain an air-pocket around the fitting to allow for heat dissipation, ensuring the downlight's fire rating is not compromised while allowing you to insulate your ceiling for energy efficiency. The Phoebe LED downlight has a IP rating of IP65, making it suitable for use in bathroom zones 1-2 & other humid conditions. With a 50, 000 hour life & 100, 000 switching cycles, it is built to last. Its 60 beam angle, 3000K, 4000K, & 6500K tri-colour select colour temperature, & high colour rendering index it is a reliable & versatile lighting solution. This product is part L compliant of UK Building Regulations & BS476 Parts 21 & 22, making it suitable for use in 30 minute 600mm/15mm single layer standard wallboard, 60 minute 600mm/12.5mm twin layer fibreboard, & 90 minute 450mm/15mm twin layer fireboard ceilings. This recessed downlight requires a cut-out dimension with a diameter between 70-72mm. With a power consumption of 8.5W & equivalent to 50W halogen GU10, this Phoebe LED downlight is energy-efficient & cost-effective. It has very low energy consumption & supplies instant start 100% light with no warm-up time. Experience the Phoebe LED Firesafe All-in-One Integrated LED Downlight & elevate your ceiling lights today! With a manufacturers 5-year warranty, you can be assured of its quality & durability.

...

A value pack of 5x Phoebe LED Firesafe All-in-One Integrated LED Downlights, a versatile lighting solution that will revolutionize ...

Phoebe LED Mini Link-Light Driver 120W Max The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This driver can power up to 8m or 120W of your link light system. Whether it's for several shorter link-light sections, or one longer section, this driver is suitable, as long as the total load of the lights doesn't exceed 120W. The driver is packaged with one touch-sensitive on/off switch, a power lead & adhesive pads, so you can easily position it out of sight. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features Suitable for use only with the Phoebe LED Mini Link-Light system Switched mode, constant current driver Suitable for powering up to 120W or 8m Contents include 1x 120W Phoebe LED Mini Link-Light power supply, 1x touch-sensitive on/off switch, 3M adhesive pads Not suitable for outdoor use 35mm x 65.5mm x 162mm ...

Phoebe LED Mini Link-Light Driver 36W Max The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This driver can power up to 2.4m or 36W of your link light system. Whether it's for several shorter link-light sections, or one longer section, this driver is suitable, as long as the total load of the lights doesn't exceed 36W. The driver is packaged with one touch-sensitive on/off switch, a power lead & adhesive pads, so you can easily position it out of sight. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features Suitable for use only with the Phoebe LED Mini Link-Light system Switched mode, constant current driver Suitable for powering up to 36W or 2.4m Contents include 1x 36W Phoebe LED Mini Link-Light power supply, 1x touch-sensitive on/off switch, 3M adhesive pads Not suitable for outdoor use 29mm x 47.5mm x 90mm ...

Phoebe LED Mini Link-Light Driver 60W Max The Phoebe LED Mini Link-Light means that you can design your own strip-light system exactly how you want. Combine a range of easy-to-connect components to create stylish, unobtrusive lighting for cabinets, shelves & bookcases. This driver can power up to 4m or 60W of your link light system. Whether it's for several shorter link-light sections, or one longer section, this driver is suitable, as long as the total load of the lights doesn't exceed 60W. The driver is packaged with one touch-sensitive on/off switch, a power lead & adhesive pads, so you can easily position it out of sight. Phoebe LED Mini Link-Light systems are easy to install. Simply click the components together & fix them in place using the mounting brackets, connectors & end caps provided. The lights must be installed with a Phoebe LED Mini Link-Light driver. Click here to see the full range of Phoebe LED Mini Link-Light components, & start designing your perfect lighting system. Features Suitable for use only with the Phoebe LED Mini Link-Light system Switched mode, constant current driver Suitable for powering up to 60W or 4m Contents include 1x 60W Phoebe LED Mini Link-Light power supply, 1x touch-sensitive on/off switch, 3M adhesive pads Not suitable for outdoor use 30mm x 52.5mm x 115mm ...

Phoebe LED Melana Round Bulkhead 15W IP66 Emergency Black This surface mounted LED bulkhead features an integrated emergency driver that allows the light to operate for three hours in the absence of mains power. It's perfect for offices & hotel corridors, or for use as emergency lighting in any commercial or hospitality environment. It is also weatherproof, so can be used safely outdoors. The Melana bulkhead features a loop-in loop-out connection terminal for simple installation. Once fitted, it emits a bright 1300 lumens of crisp 4000K cool white light, & its wide 110° beam angle means it can light larger rooms & corridors efficiently. The integrated emergency driver will trigger when the bulkhead is cut off from the mains power supply, & will allow the light to operate at 20% of its full brightness for three hours. Constructed from durable polycarbonate, the Melana has a smart black finish & opal diffuser that softens the light & reduces glare. Its IP66 rating means it is fully protected from the elements, so it can be used in outdoor spaces like gardens & courtyards (see our guide to IP ratings for more information). Its tough IK10 impact rating means that you can install it in busy areas safe in the knowledge that it will be protected from knocks, while a built-in safety isolating control gear protects the luminaire from short circuits. Please note, this light is not suitable for dimming. Features 15W surface mounted LED bulkhead Integrated emergency driver
- 3-hour operation 35, 000 hours average rated life 50, 000 switching cycles 1300 lumens IP66 rated Instant full light 110° beam angle 240V Not suitable for dimming
...

Phoebe LED Melana 18W Emergency LED Bulkhead This surface mounted LED bulkhead from Phoebe LED features a tri-colour switch that means that you can change the colour temperature of the light at the point of installation. The three colour options are 3000K warm white, 4000K cool white, & 5000K extra cool white. The Melana is also built with an integrated emergency battery & driver, allowing the light to function in the absence of mains power. In emergency mode, it will operate for up to three hours at 20% of its full brightness (approximately 350 lumens). The versatility & safety-conscious design means that the Melana LED bulkhead can be used in almost any commercial or office space. The bulkhead emits a bright 1700 lumens at its full output, in any of its colour modes, & its opal diffuser softens the light & reduces glare. It is IP54 rated, so it can be used in bathrooms, while its robust polycarbonate construction & long 40, 000 hour life make the Melana a reliable, cost efficient alternative to traditional fluorescent lighting. Features 18W integrated LED bulkhead 3 hour emergency mode Tri-colour switch: 3000K, 4000K, or 5000K 40, 000 hours life 20, 000 switching cycles 1700 lumens IP54 rated Instant full light 120° beam angle Not suitable for dimming ...

Phoebe LED Krios IP65 emergency bulkhead with 4W maintained or 1.1W non-maintained power rating & 3-hour emergency function. Having both maintained or non-maintained functions allows the Krios Emergency Bulkhead to either be lit continuously or turn-on in the event of a power failure. The Krios Emergency Bulkhead features a fully integrated quality emergency driver with 3.6V 1.0a H Ni-cd battery & 3-hour emergency run-time. The quality light output emitted ensures a 26-metre visibility range making the fitting visible in emergency conditions. ...

Phoebe LED Krios emergency blade 2W maintained/non-maintained with 3-hour emergency function. Having both maintained or non-maintained functions allows the Krios Emergency Blade to either be lit continuously or turn-on in the event of a power failure. The Krios Emergency Blade can be surface mounted to ceilings & walls or it can also be mounted perpendicular to a wall. Suspension & recessed mounting kits are available separately. The Krios Emergency Blade features a quality emergency driver with a Li Fe PO4 3.2V 600m Ah battery & 3-hour emergency run-time. The quality light output emitted ensures a 26-metre visibility range making the fitting visible in emergency conditions. The manual test function allows users to test the Krios Emergency Blade as & when required, in-line with testing regulations. ...

Phoebe LED Krios emergency blade 2W maintained/non-maintained with 3-hour emergency function. Having both maintained or non-maintained functions allows the Krios Emergency Blade to either be lit continuously or turn-on in the event of a power failure. The Krios Emergency Blade can be surface mounted to ceilings & walls or it can also be mounted perpendicular to a wall. Suspension & recessed mounting kits are available separately. The Krios Emergency Blade features a quality emergency driver with a Li Fe PO4 3.2V 600m Ah battery & 3-hour emergency run-time. The quality light output emitted ensures a 26-metre visibility range making the fitting visible in emergency conditions. The manual test function allows users to test the Krios Emergency Blade as & when required, in-line with testing regulations. Kit comes complete with 1x up, 1x down & 1x left/right reversible legend arrow set. ...