Red Arrow Brass Fixed Downlight An integrated intumescent material completely seals the Red Arrow Fire Rated Downlight & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with an MR16 lamp holder, the downlight is designed to accommodate low voltage (12v) MR16 bulbs. The downlight

Includes:: an MR16/GU5.3 connection cable & is also fitted with an integrated terminal block connector in order to connect the 12v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 12v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP20 Lamp Base: MR16 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 75mm





...

Red Arrow Brass Adjustable Downlight An integrated intumescent material completely seals the Red Arrow Fire Rated Downlight & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with an MR16 lamp holder, the downlight is designed to accommodate low voltage (12v) MR16 bulbs. The downlight

Includes:: an MR16/GU5.3 connection cable & is also fitted with an integrated terminal block connector in order to connect the 12v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 12v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP20 Lamp Base: MR16 Positional Adjustment: Adjustable

Material: Die cast aluminium bezel Cut Out Diameter: 90mm





...

Red Arrow White Fixed Shower Light Though nominally a shower light, this unit is in actuality an IP65 rated downlight that can be used in a host of commercial & domestic environments, including but not limited to bathrooms & shower rooms. An integrated intumescent material completely seals the Red Arrow Fire Rated Shower Light & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with an MR16 lamp holder, the downlight is designed to accommodate low voltage (12v) MR16 bulbs. The downlight

Includes:: an MR16/GU5.3 connection cable & is also fitted with an integrated terminal block connector in order to connect the 12v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 12v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP65 Lamp Base: MR16 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 70mm IP65 rated for use in locations containing a bath or shower (IEE Wiring Regulations for Zones 1, 2 & 3). For a full explanation of IP zoning & how it applies to your fitting, see our blog.





...

Red Arrow Brass Fixed Shower Light Though nominally a shower light, this unit is in actuality an IP65 rated downlight that can be used in a host of commercial & domestic environments, including but not limited to bathrooms & shower rooms. An integrated intumescent material completely seals the Red Arrow Fire Rated Shower Light & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with a GU10 lamp holder, the downlight is designed to accommodate mains voltage (240v) GU10 bulbs whilst an accompanying twist & lock mechanism makes installation incredibly simple. The downlight is also fitted with an integrated terminal block connector in order to connect the 240v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 240v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP65 Lamp Base: GU10 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 70mm IP65 rated for use in locations containing a bath or shower (IEE Wiring Regulations for Zones 1, 2 & 3). For a full explanation of IP zoning & how it applies to your fitting, see our blog.



...

Red Arrow Brass Fixed Downlight The Red Arrow fire rated downlight is designed to accommodate the GU10 bulb fitment which is held in place using a twist & lock system that makes replacement extremely simple. This is the 'fixed' model which cannot be tilted. An integrated intumescent material completely seals the downlight & any associated bores/cut outs to ensure that your ceiling's ability contain a fire is not compromised with its installation. The unit has been tested in 30, 60 & 90 minute fire rated ceilings. This downlight

Includes:: a GU10 connection cable & is also fitted with an integrated terminal block connector in order to connect the 240v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Note that the fitting's cut out diameter is 75mm & the visible, front facing fascia is 92mm. When fitting a bulb, please consider that the recommended maximum wattage is 35W for flammable surfaces & 50W for those that are non-flammable. Fitting anything above these tolerances poses a serious risk of fire. Bulbs not included. Input Voltage: 240v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP20 Lamp Base: GU10 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 75mm




...

The Red Arrow fire rated downlight is designed to accommodate the GU10 bulb fitment which is held in place using a twist & lock system that makes replacement extremely simple. This is the 'fixed' model which cannot be tilted. An integrated intumescent material completely seals the downlight & any associated bores/cut outs to ensure that your ceiling's ability contain a fire is not compromised with its installation. The unit has been tested in 30, 60 & 90 minute fire rated ceilings. This downlight

Includes:: a GU10 connection cable & is also fitted with an integrated terminal block connector in order to connect the 240v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Note that the fitting's cut out diameter is 75mm & the visible, front facing fascia is 92mm. When fitting a bulb, please consider that the recommended maximum wattage is 35W for flammable surfaces & 50W for those that are non-flammable. Fitting anything above these tolerances poses a serious risk of fire. Bulbs not included. Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max.
Material: Die cast aluminium bezel Requires 1 x GU10 bulb max 35W (sold separately).



...

Red Arrow Brass Fixed Shower Light Though nominally a shower light, this unit is in actuality an IP65 rated downlight that can be used in a host of commercial & domestic environments, including but not limited to bathrooms & shower rooms. An integrated intumescent material completely seals the Red Arrow Fire Rated Shower Light & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with an MR16 lamp holder, the downlight is designed to accommodate low voltage (12v) MR16 bulbs. The downlight

Includes:: an MR16/GU5.3 connection cable & is also fitted with an integrated terminal block connector in order to connect the 12v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 12v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP65 Lamp Base: MR16 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 70mm IP65 rated for use in locations containing a bath or shower (IEE Wiring Regulations for Zones 1, 2 & 3). For a full explanation of IP zoning & how it applies to your fitting, see our blog.





...