Red Arrow Brass Fixed Shower Light Though nominally a shower light, this unit is in actuality an IP65 rated downlight that can be used in a host of commercial & domestic environments, including but not limited to bathrooms & shower rooms. An integrated intumescent material completely seals the Red Arrow Fire Rated Shower Light & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with an MR16 lamp holder, the downlight is designed to accommodate low voltage (12v) MR16 bulbs. The downlight

Includes:: an MR16/GU5.3 connection cable & is also fitted with an integrated terminal block connector in order to connect the 12v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 12v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP65 Lamp Base: MR16 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 70mm IP65 rated for use in locations containing a bath or shower (IEE Wiring Regulations for Zones 1, 2 & 3). For a full explanation of IP zoning & how it applies to your fitting, see our blog.





...

Red Arrow Brass Fixed Downlight An integrated intumescent material completely seals the Red Arrow Fire Rated Downlight & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with an MR16 lamp holder, the downlight is designed to accommodate low voltage (12v) MR16 bulbs. The downlight

Includes:: an MR16/GU5.3 connection cable & is also fitted with an integrated terminal block connector in order to connect the 12v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 12v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP20 Lamp Base: MR16 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 75mm





...

Red Arrow Brass Adjustable Downlight An integrated intumescent material completely seals the Red Arrow Fire Rated Downlight & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with an MR16 lamp holder, the downlight is designed to accommodate low voltage (12v) MR16 bulbs. The downlight

Includes:: an MR16/GU5.3 connection cable & is also fitted with an integrated terminal block connector in order to connect the 12v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 12v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP20 Lamp Base: MR16 Positional Adjustment: Adjustable

Material: Die cast aluminium bezel Cut Out Diameter: 90mm





...

Red Arrow White Fixed Shower Light Though nominally a shower light, this unit is in actuality an IP65 rated downlight that can be used in a host of commercial & domestic environments, including but not limited to bathrooms & shower rooms. An integrated intumescent material completely seals the Red Arrow Fire Rated Shower Light & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with an MR16 lamp holder, the downlight is designed to accommodate low voltage (12v) MR16 bulbs. The downlight

Includes:: an MR16/GU5.3 connection cable & is also fitted with an integrated terminal block connector in order to connect the 12v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 12v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP65 Lamp Base: MR16 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 70mm IP65 rated for use in locations containing a bath or shower (IEE Wiring Regulations for Zones 1, 2 & 3). For a full explanation of IP zoning & how it applies to your fitting, see our blog.





...

Red Arrow Brass Fixed Shower Light Though nominally a shower light, this unit is in actuality an IP65 rated downlight that can be used in a host of commercial & domestic environments, including but not limited to bathrooms & shower rooms. An integrated intumescent material completely seals the Red Arrow Fire Rated Shower Light & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with a GU10 lamp holder, the downlight is designed to accommodate mains voltage (240v) GU10 bulbs whilst an accompanying twist & lock mechanism makes installation incredibly simple. The downlight is also fitted with an integrated terminal block connector in order to connect the 240v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 240v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP65 Lamp Base: GU10 Positional Adjustment: Fixed

Material: Die cast aluminium bezel Cut Out Diameter: 70mm IP65 rated for use in locations containing a bath or shower (IEE Wiring Regulations for Zones 1, 2 & 3). For a full explanation of IP zoning & how it applies to your fitting, see our blog.



...

Red Arrow Brass Adjustable Downlight An integrated intumescent material completely seals the Red Arrow Fire Rated Downlight & any associated ceiling bores/cut outs in the event of a fire to ensure it is adequately contained
- the unit has been tested in 30, 60 & 90 minute fire rated ceilings. It is also designed to form an effective acoustic barrier, ensuring that your ceiling's ability to contain both fire & noise isn't compromised with its installation. Supplied with a GU10 lamp holder, the downlight is designed to accommodate mains voltage (240v) GU10 bulbs whilst an accompanying twist & lock mechanism makes installation incredibly simple. The downlight

Includes:: a GU10 connection cable & is also fitted with an integrated terminal block connector in order to connect the 240v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Bulbs not included. Input Voltage: 240v Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max. IP Rating: IP20 Lamp Base: GU10 Positional Adjustment: Adjustable

Material: Die cast aluminium bezel Cut Out Diameter: 90mm





...

The Red Arrow fire rated downlight is designed to accommodate the GU10 bulb fitment which is held in place using a twist & lock system that makes replacement extremely simple. This is the 'fixed' model which cannot be tilted. An integrated intumescent material completely seals the downlight & any associated bores/cut outs to ensure that your ceiling's ability contain a fire is not compromised with its installation. The unit has been tested in 30, 60 & 90 minute fire rated ceilings. This downlight

Includes:: a GU10 connection cable & is also fitted with an integrated terminal block connector in order to connect the 240v supply quickly & safely. Approved to BS476 parts 21
- 23, suitable for 90 minute fire rated ceilings. Note that the fitting's cut out diameter is 75mm & the visible, front facing fascia is 92mm. When fitting a bulb, please consider that the recommended maximum wattage is 35W for flammable surfaces & 50W for those that are non-flammable. Fitting anything above these tolerances poses a serious risk of fire. Bulbs not included. Wattage (Flammable Surfaces): 35W max. Wattage (Non-Flammable Surfaces): 50W max.
Material: Die cast aluminium bezel Requires 1 x GU10 bulb max 35W (sold separately).



...