The Scythe-Mugen series has established itself as an inexpensive high-performance CPU cooler The Scythe Mugen 5 Black RGB Edition CPU cooler comes with a black cover & a fan with static RGB LED lighting which is compatible with the RGB interfaces of leading motherboard manufacturers The Scythe Mugen 5 Black RGB Edition CPU cooler at a glance- Asymmetrical tower design with six heat pipes- 120 mm PWM RGB fan for smooth running- 300
- 1200 revolutions per minute- 40
- 249 d B (A) volume- 282
- 8693 m&179; h air flow- 0076
- 105 mm H2O Static contact pressure- High compatibility with AMD & Intel Efficient CPU cooling with the Scythe Mugen 5 Black RGB Edition In contrast to its predecessor the Mugen 5 has a slightly changed design Thanks to the six inclined heat pipes the asymmetrically arranged heat sink does not sit directly above the base plate & thus allows unrestricted access to the memory banks which can therefore also accommodate protruding memory bars with large heat sinks The contact points of the six heat pipes were sensibly distributed on the large aluminum heat sink & with a total of twelve risers ensure a high heat transfer capacity On the top of the tower cooler is a cover plate made from black anodized aluminum with the manufacturer's logo The other design details correspond to the usual Scythe cooler range the fins are therefore made from aluminum while the base is made from copper & protected with a nickel layer A 120 mm fan is included in the scope of delivery If necessary another can be installed The brackets required for this are even included in the scope of delivery The enclosed fan is a PWM model from the Kaze Flex series from Scythe with a very wide control range from 300 to 1200 rpm This makes the Mugen 5 Black RGB Edition Equipped for every application from ultra-silent to overclocking after all it generates just 4 d B (A) at minimum speed & in return transports almost 8693 m&179; h at maximum speed In addition the fan is equipped with RGB LED lighting which is connected to the mainboard via a 4-pin RGB connection (12 V) & via ASUS Aura Sync MSI Mystic Light Sync ASRock Polychrome Sync or Gigabyte RGB Fusion can be controlled The mounting kit offers very high compatibility for AMD & Intel processors In addition with its sturdy screw connection it guarantees a secure fit of the cooler even during transport Thermal paste & installation instructions are also included

Specification-

Dimensions (with fan) 130 x 1545 x 110 mm (W x H x D)- Weight 890 g- Material nickel-plated copper (base plate) copper (heat pipes) aluminum (fins)- Heat pipes 6 pieces- Fan 120 mm Kaze Flex RGB PWM (40
- 249 d B (A) 300
- 1200 rpm 282
- 8693 m&179; h) Connections- 4-pin PWM- 4-pin RGB (12 V) Compatibility- Intel 775 1200 1150 1151 1155 1156 1366 2011 2011-v 3 2066- AMD AM2 () AM3 () AM4 FM1 FM2 ()










...

Inked Gaming is partnering with Stonemaier Games to bring you an Offical Neoprene Scythe Playmat This new accessory will be printed on demand right here at Inked Gaming&s headquarters The mat is 36" x 28" which makes it larger than the standard board giving more room for all those beautiful mechs We are the official supplier for North America The Scythe Neoprene Playmat comes equipped with double stitched edging for an additional layer of protection to prevent wear & tear It is rollable & has a grippy rubber base so that it won&t slide or move around on your gaming table Include our insanely vibrant printing & you have yourself one incredible game mat The Scythe Neoprene Mat is Approx. 36" x 28" & made out of polyester with anti-slip rubber backing The edges are stitched to prevent the mat from fraying over time Officially licensed to be used with the Scythe Board Game Double stitched edging Smooth cloth top with rubber base for traction Vibrant colors Machine washable ...

The Scythe Katana 5 is a compact & powerful CPU cooler that delivers optimal performance in a small space The fifth generation Katana named after the Japanese longsword impresses with its reworked heatsink design the new Kaze-Flex fan & its simple well thought-out mounting system The Scythe Katana 5 Features- Easy installation without backplate- High performance despite low height- 92 mm silent fan with vibration dampers- Nickel plated copper bottom plate &38; three 6mm heatpipes- Does not block DIMM slots- High compatibility with AMD & Intel An evolutionary stage continues The 5th generation offers a new modern design but without renouncing the key features of its predecessor models The solid foundation of the processor cooler forms the nickel-plated copper base plate with three powerful heatpipes each with a diameter of 6 millimeters The height was even reduced compared to its predecessor while the structure of the cooling fins is still inclined The fan sits again at right angles to the base & blocks no memory banks thanks to its clever design The Scythe Katana 5 comes with a completely new developed 92 mm fan The Kaze Flex is PWM-controlled works in one Speed range from 300 to 2300 rpm & is quite quiet with a maximum of 2883 db (A) The outer edges of the fan are rubberized thus ensuring a reduced vibration transmission & contribute to a reduced noise The fluid-dynamic bearing of the Kaze-Flex fan is designed for 120000 operating hours The Scythe Katana 5 attaches directly to the motherboard's retention module without a backplate & is compatible with many Intel & AMD sockets including the AM4 socket of the Ryzen processors Removing the motherboard is therefore not necessary to install this cooler Cooler

Specification-

Dimensions 105 x 135 x 104 mm (W x H x D)- Material nickel-plated copper (heatpipes bottom plate) aluminum (fins cover plate)- Weight 560 g- Heatpipes 3x &216; 6 mm Fan

Specification- 1x 95 mm Kaze Flex PWM (max 2300 rpm)- Connection 4-pin PWM- Delivery volume max 489 CFM- Static pressure max 229 mm H2O- Total volume max 2883 d B (A) Compatibility- Intel Sockets 775 1200 1150 1151 1155 1156 1366- AMD Sockets 754 939 940 AM2 AM2 AM3 AM3 AM4 FM1 FM2 FM2
- Manufacturer's warranty 3 years Conents- 1x cooler- 1x fan- 1x mounting clamps for Intel (push-down mechanism already mounted)- 1x mounting clip for AMD- 4x screws for mounting- clamps (already mounted) 2x fan retaining clips- 1x thermal grease- 1x instructions






...

Asymmetric design for maximum memory compatibility RAM modules with large passive heatsinks are no problem for the Mugen 5 Its heatpipes are slightly sloped backwards so that the radiator is not centered above the baseplate but slightly offset This asymmetrical design allows unrestricted access to the memory slots Kaze Flex 120 PWM Fan The Mugen 5 is equipped with a PWM fan from the newly developed Kaze Flex series It operates in a range from 300 to 1200 RPM The self-contained liquid bearing (Sealed Precision FDB) reduces friction & wear to a minimum which results in an average lifespan of 120000 hours Rubberized pads have a decoupling effect & prevent the transfer of vibrations HPMS II (Hyper Precision Mounting System II) The second generation of the Hyper Precision Mounting System was designed with several small improvements benefiting the user friendliness The already pre-assembled mounting bar makes installation much simpler while spring-loaded screws prevent uneven pressure distribution The Mugen 5 package also

Includes:: an extra-long screwdriver for easy mounting Dual Fan Mount Structure Like its predecessors the Mugen 5 was designed to mount a second fan (not included) This leads to an increased cooling performance by making use of the push pull principle A second set of fan-clips is included

Specification- Overall

Dimensions Wx Hx D 130 x 1545 x 110 mm- Weight 890 g 314 oz- Accessory Mounting parts for Intel & AMD sockets fan fan clips thermal grease installation manual
- Baseplate Material Heatpipes Nickel-plated copper- Fan

Dimensions 120 x 120 x 27 mm- Noise Level 4 249 d BA- Air Flow 166 5117 CFM 282 8693 m&179;h- Fan Speed 300 (&177;200 rpm) 1200 rpm (&177;10) (PWM-controlled)- Static Pressure 075 103 Pa 0076 105 mm H&178;O- Bearing Type Sealed Precision FDB- Voltage 12V- MTTF 120000 Hours (25&176;C)








...

Applying well-proven concepts to further improvements not only saves money but also ensures outstanding products that really stand out The Scythe Mugen series has established itself as a low-cost high-performance CPU cooler The Scythe Mugen 5 TUF Gaming Alliance CPU cooler comes with black & yellow design elements & RGB LED lighting that is compatible with ASUS Aura Sync The Scythe SCMG-5100TUF Mugen 5 TUF CPU cooler at a glance- Asymmetric tower design with six heatpipes- 120 mm PWM fan for smooth running- 300
- 1200 revolutions per minute- 40
- 249 d B (A) volume- 1659
- 5119 cfm air flow- 075
- 15 mm H2O Static contact pressure- High compatibility with AMD & Intel Efficient CPU cooling with the Scythe Mugen 5 Unlike its predecessor the Mugen 5 has a slightly different design Thanks to the six inclined heatpipes the asymmetrically arranged heat sink does not sit directly above the bottom plate allowing unrestricted access to the memory banks which in turn can also accommodate bulky storage latches with large heat sinks The contact points of the six heatpipes were sensibly distributed over the large aluminum heat sink & together with twelve risers provide a high heat transfer capacity On top of the tower cooler is a plastic cover with the TUF Gaming Alliance logo & RGB LED lighting The other structural details correspond to the usual Scythe cooler range The lamellae are therefore made from aluminum while the bottom is made from copper & protected with a nickel layer The scope of supply

Includes:: a 120 mm fan If necessary another can be installed The required brackets are included in the scope of delivery The enclosed fan is a PWC model from the Kaze Flex range from Scythe with a very wide control range from 300 to 1200 rpm Thus the Mugen 5 from Ultra-Silent to overclocking is equipped for every purpose after all it generates just 4 d B (A) at minimum speed & in return transports almost 5119 cfm at maximum speed In addition the fan is equipped with RGB LED lighting which can be connected to the motherboard via a 4-pin RGB connector (12 V) & controlled via ASUS Aura Sync The mounting kit provides very high compatibility for AMD & Intel processors In addition with its sturdy screw connection it guarantees a secure fit of the cooler even during transport Thermal grease & installation instructions are also included Technical details-

Dimensions 130 x 1545 x 110 mm (W x H x D)- Weight 890 g- Material nickel plated copper (bottom plate) copper (heatpipes) aluminum (lamellae)- Heatpipes 6 pieces- Fan 120 mm Kaze Flex RGB PWM (40
- 249 d B (A) 300
- 1200 rpm 1659
- 5119 cfm) Connectors- 4 pin PWM- 4 pin RGB (12V) Compatibility- Intel 775 1200 1150 1151 1155 1156 1366 2011 2011-v 3 2066- AMD AM2 () AM3 () AM4 FM1 FM2 ()










...

The Ninja 5 from Scythe is the current version of the Ninja series Thanks to the two Kaze Flex 120 PWM fans supplied the noise level during operation was significantly reduced The two fans work in the push-pull process do not require more than 800 revolutions per minute & still offer an enormous cooling capacity A new fin design ensures that RAM modules up to 55 millimeters high can also be used In addition the experts at Scythe have refined the mounting system which is now available in the version & is highly compatible with common AMD & Intel sockets The Scythe Ninja 5 at a glance- Powerful single tower cooler even for narrow housings- TMAPS technology for particularly effective heat transfer & low weight- Two 120 mm Kaze Flex 120 PWM fans using the push-pull process- Thanks to the new cooler design it is highly compatible with many RAM modules- Optimal integration into the airflow through flexible fan mounting on all sides- New mounting system compatible with all common AMD &38; Intel sockets (except AM4) The Scythe Ninja 5 in detail The design of the lamella block allows the fans to be mounted on all four sides even on mainboards with an AMD socket This enables the Ninja 5 to be optimally integrated into the airflow in the housing & reduces turbulence & the creation of hotspots in the housing The Kaze Flex 120 PWM fans now used are used in the pull-push process so they run almost silently at a maximum of 800 rpm even under load The fans themselves are specially designed for quiet operation The arrangement of the fins on the heat sink has been changed so that higher RAM modules fit under the cooler on both the left & right This allows the Scythe Ninja 5can also be used on mainboards that can accommodate up to eight RAM bars The mounting system HPMS in the current version III is based on an even simpler mounting & increased compatibility which is based on AMDs AM2 AM2 AM3 AM3 AM4 FM1 FM2 FM2 & Intel 775 1150 1151 1155 1156 1366 2011 2011-v 3 2066 socket A little thermal paste for the first use is also included Note Please note that the original backplate of the mainboard is required for mounting on mainboards with an AMD processor socket Please check whether this is available before buying! Technical details-

Dimensions (without fan) 138 x 155 x 180 mm (W x H x D)- Fan

Dimensions 120 x 120 x 27 mm (W x H x D)- Weight approx 1190 g- Material nickel-plated copper (base plate) copper (heat pipes) aluminum (fins)- Heat pipes 6x &216; 6 mm- Fan 2x 120 mm Kaze Flex PWM- Volume 4 to 145 d B (A)- Speed 300 to 800 U min- Air flow 282 to 731 m&179; h (1659
- 4302 cfm)- Static pressure 0076 to 049 mm H2O- Voltage 12 V- Current 009 A- Connection 4-pin PWMCompatibility- Intel 775 1150 1151 1155 1156 1366 2011 2011-v 3 2066- AMD AM2 AM2 AM3 AM3 AM4 FM1 FM2 FM2 Contents- 1x Scythe Ninja 5- 2x Kaze Flex 120 PWM- Fan clamps- Y-PWM adapter- Mounting material for AMD & Intel- Thermal paste- Screwdriver




...

These realistic resource tokens replace the wooden tokens in the retail special edition & premium versions of Scythe They include 80 tokens (20 each) for oil wood metal & food & they&re made out of resin & metal (depending on the token) Warning Not suitable for children under 36 months due to small parts ...

Empires have risen & fallen in the aftermath of the Great War & Europa stands on the precipice of a new era The economy is robust morale is high & defenses are strong There are reports from the countryside of strange soldiers with glowing eyes but they seem distant & harmless Scythe The Rise of Fenris the conclusion to the Scythe expansion trilogy enables two different options for any player count (1-5 if you have Scythe; 1-7 players if you have Invaders from Afar) Campaign (8 games) The story of Scythe continues & concludes with an eight-episode campaign While the campaign

Includes:: surprises unlocks & persistent elements it is fully resettable & replayable Modular (11 modules) Instead of—or after—the campaign the new modules in The Rise of Fenris can be used in various combinations to cater to player preferences These modules are compatible with all Scythe expansions & they include a fully cooperative module While the exact nature of the episodes & modules will remain a mystery (most of these components are in 5 secret tuckboxes & on 6 punchboards) the components in this expansion include a detailed episodic guidebook 13 plastic miniatures 62 wooden tokens 2 custom dice 25 tiles & 100 cardboard tokens 1–5 Players 75–150 Min Playing Time Age 12

...

Mankind has long been confined to travel by land & sea but a new technology has emerged from the greatest minds in Eastern Europa airships These steam-driven behemoths sail freely across the sky aiding their empire’s expansion through innovation & confrontation As the year&s pass the world has come to understand that no single faction will rise above the rest for any span of time In the hopes of decreasing the conflict & increasing the peace leaders of Europa begin to gather each year to declare a new way for the factions to resolve their differences This expansion to Scythe adds 2 new modules that can be played together or separately at any player count & with either the base game or other Scythe expansions
Includes:7 huge (10 cm) airship miniatures 7 clear plastic stands 16 airship ability tiles 8 resolution tiles 2 rulebooks 1 achievement sheet 1 box 1 custom plastic insert
...

Perched on a black rocky outcrop this jealous violet dragon glances around with green eyes Their head rears up revealing the light blue of their underbelly & neck & their wings are raised to warn off any intruders In front of them clear crystals jut out from a pile of amethysts Cast in high-quality resin before being painstakingly h&-painted this fierce dragon statuette is a must-have for any fantasy figure collection ...