The stylish Enthoo Evolv Shift Midi-Tower from PHANTEKS offers elegant tempered glass panels to make for a uniquely stylish look But for all those in need of a little more airflow in the case PHANTEKS is now offering optional side panels with fabric coverings The PHANTEKS Mesh Panel for the Enthoo Evolv Shift offers significant improvements in airflow while also helping users prevent unwanted dust from entering the case The fabric panel is designed exclusively for & compatible with Enthoo Evolv Shift enclosures Technical details Material plastic fabric Color Black Compatibility PHANTEKS Enthoo Evolv Shift
Includes: 1x side panel
...

Enthoo Evolv Shift combines the striking design of the Evolv series with new innovative features to make for a truly eye-catching Mini-ITX case The Evolv shift has a very small footprint nevertheless thanks to its clever layout it is capable of holding an extensive range of powerful gaming hardware The shift can also be placed horizontally cutting an attractive figure in any living room with its combination of aluminium & tempered glass THE FEATURES OF THE PHANTEKS ENTHOO EVOLV SHIFT MINI-ITX CASEStriking aluminium & tempered-glass design Perfect case for stylish living room PCs Graphics cards up to 35 cm in length GPU bracket can be rotated Supports a wide range of RGB-LED controllers Can be set vertically or horizontally PREMIUM PC CASE FOR THE LIVING ROOMThe Enthoo Evolv Shift offers space for gaming graphics cards up to 35 cm in length & according to Phanteks is ideally suited for the installation of Ai O water-coolers With its aluminium surfaces & tempered glass this Mini-ITX case fits seamlessly into any designer living environment & can be placed in a standing orientation similar to Hi-Fi speakers or placed horizontally like a games console The graphics card is mounted with the accompanying PCIe x 16 riser card in such a way as to allow either the backplate or the GPU cooler to be visible from the exterior The Mini-ITX motherboard is built in parallel to the graphics card with the back panel facing upwards The ports on the IO panel as well as the graphics card are hidden beneath a cover to allow all connected cables to be redirected through a gap in the back COOLING STORAGE &38; ADDITIONAL FEATURESA 140 mm fan comes pre-installed from the factory at motherboard height in the Evolv Shift & this helps to exhaust warm air out of the case from the front in addition the warm air produced by the hardware is also removed via the vents built into the roof of the case A 120 mm fan or radiator for an All-in-One watercooler can be installed in the lower section while a further 120mm fanradiator can be installed in the front A 35 hard drive or a 25 SSD can be installed in the rear & two further SSDs can be located in the front using the SSD brackets
- at the expense of the bottom 140 mm fans The baseplate in the back used for mounting the SSDHDD can also be removed to make hardware installation easier For the best view of the RGB-LEDs in the installed hardware the integrated LED lighting is compatible with Aura Sync from ASUS RGB Fusion from Gigabyte as well as MSI's Mystic Light Sync all of which can be controlled at the push of a button The IO panel of the Mini-ITX case is located to the left side on the rear of the case & offers two USB (Universal Serial Bus) 30 ports for gaming peripherals or external USB (Universal Serial Bus) hard drives as well as USB (Universal Serial Bus) sticks In typical Phanteks fashion there are several points with Hook & loop fastener ties as well as rubberised cable guides for cable management in the case design As well as air vents in the aluminium on the front & rear there are also dust filters in the casing to offer the system further protection Technical Details Dimensions 170 x 470 x 274 mm (W x H x D) Material Steel aluminium tempered glass Colour Gunmetal Grey Form Factor Mini-ITXTotal Possible Fans 2x 140120 mm (front)1x 140120 mm (lower) Pre-Installed 1&215; 140 mm (front) Radiator Mountings (partially dependent upon HDD andor fan slots)1x max 120 mm (front)1x max 120 mm (lower) Filter Front back lower (removable) Drive Trays 1x 35 (internal if no radiator is installed)3x 25 (internal 2 SSD brackets available additional brackets can be acquired separately) Power Supply 1x SFX or SFX-L (optional) Expansion Slots 2IO Panel 2x USB (Universal Serial Bus) 301x RGB Switch Maximum Graphics Card Length 350 mm Maximum CPU Cooler Height 82 mm Guarantee 5 Years
...

Phanteks stands for innovation quality & uniqueness
- a reputation that the renowned company has earned in a short period of time
...

Phanteks&8217; new Enthoo Pro M variant will now include a tempered glass side panel System builders & watercooling enthusiasts can now showcase their build in style! The ENTHOO PRO M focuses on delivering great design without compromising price Water-cooling builds will be a simple task with the help of our innovative radiator bracket & pump mounting locations Whether you are a system builder or water-cooling enthusiast the PRO M will give you unlimited possibilities Enthoo Pro M

Includes:: 1 x 140mm fan in the rear & front Ability to upgrade to additional fans is possible All fans included are Phanteks&8217; new redesigned & better performing SP series fans FEATURES- Brushed aluminum look- Clean interior
- Hidden PSU & HDD&8217;s- Optimal airflow
- Direct airflow to CPU GPU- Comes with 2 Phanteks premium fans
- 1x PH-F140SP in frontrear (140mm)- 3 different installation areas for radiators (120mm or 140mm form factor)
- Reservoir mounting locations- 1x Drop-N-Lock SSD brackets included- Removable HDD cage for installation of long PSU&8217;s (&62;180mm) waterpump- Equipped with removable dustfilters (1x front 1x bottom 1x top magnetic)- Clean cable management using Phanteks' preinstalled Hoop-N-Loop cable ties- Removable optical drive cage SPECIFICATIONS- Dimension 235 mm x 480 mm x 500 mm (W x H x D) 925 in x 189 in x 197 in- Colour Black- Form Factor Midtower Chassis- Material (s) Plastic Exterior Steel Chassis Tempered Glass side window
- Motherboard Support E-ATX (up to 264mm wide) ATX Micro ATX Mini ITX- Front IO 2x USB (Universal Serial Bus) 30 Mic Headphone Reset- Side Window Yes- Expansion slots 7- Internal 35 8x (2x included)- Internal 25 (dedicated) 3x (1x included)- Cooling 120mm Fan
- Front 2x (3x without ODD Cage) Top 3x Rear 1x- Cooling 140mm Fan
- Front 2x (1 included) Top 2x Rear 1x (1 included)- Liquid Cooling 120mm Radiator
- Front Up to 360mm Top Up to 360mm Rear 120mm- Liquid Cooling 140mm Radiator
- Front Up to 280mm Top Up to 280mm Rear 140mm- Graphic card Clearance 420 mm (1654 in) No HDD brackets 300 mm (118 in) HDD brackets installed- PSU Clearance 318 mm (125 in)- CPU cooler Clearance 194 mm (76 in)- Cable management 3.5cm (138 in)- Memory clearance (motherboard
- fan) 120mm 68 mm (268 in) 140mm 48 mm (189 in)- Package Dimension 315 mm x 545 mm x 585 mm (Wx Hx D)- Net Weight 74kg (154 lbs)- Gross Weight 90kg (198 lbs)- Warranty 5 Years











...

The Phanteks Enthoo Pro M Special Edition Midi-Tower in the Tempered Glass Edition is an expanded & visually optimised version of the Enthoo Pro M base model The variant now comes with a stylish side panel in tempered glass to allow an unimpeded view of the case&s interior In addition to the dust filters installed in the front roof & PSU shroud the case comes with two pre-installed 140 mm fans equipped with two Phanteks RGB fan frames & this can be supplemented with further fans or radiators (up to 360 mm) Furthermore the case supports motherboards up to E-ATX form factor & a maximum of eight 35" & five 25" data storage devices provided two 25" drives instead of two 35" drives are installed along with the optionally available brackets for maximum drive capacity IMPORTANT FEATURES OF THE PHANTEKS ENTHOO ENTHOO PRO M SPECIAL EDITION MIDI-TOWER Premium design with tinted tempered glass side-panels & premium materials luxurious interior in striking white Compatible with motherboards up to E-ATX form factor (max 264 cm wide) Three dust filters & two 140 mm fans pre-installed Two Phanteks Halos RGB fan frames for impressive lighting Side-mounted IO panel with RGB controls two USB (Universal Serial Bus) 30 ports & HD Audio ports Space for two 35" & three 25" storage devices (2x 25" instead of 35" expandable) Graphics cards up to 42 cm CPU cooler up to 194 cm & power supplies up to 318 cm TIMELESS & ELEGANT DESIGN WITH LARGE GLASS SIDE PANEL The removable front bracket offers a large black mesh acting as an air inlet & is just like the roof designed in a premium manner thanks to its black plastic which is styled to look like brushed aluminium In the upper front you can find a 525" slot concealed behind a panel on the side of the front are located the IO ports two USB (Universal Serial Bus) 30 ports as well as two audio ports & a reset button Even RGB lighting controls are present & accounted for The left side panel consisting of a huge pane of tinted glass also allows for an impressive view of the white frame of the case as well as the installed hardware With just a power button in front & several fan slots hidden behind the mesh the top section continues the seamless look In contrast to many other cases Phanteks has installed dust filters not only in the front & bottom of the Enthoo Pro M Special Edition as well The view from the window also reveals in addition to the many rubberised cable pass-throughs a dedicated chamber for the ATX power supply which pulls its fresh air from below without allowing warm air to escape to the rest of the parts in the tower Up to two 140- or three 120 mm fans or similarly proportioned radiators can be installed behind the front panel Only the installation of a 360 mm radiator requires the removal of the 525" drive age One 140 mm fan comes pre-installed in the front & one comes pre-installed in the rear & this one also comes kitted out with Phanteks Halos RGB fan frames The complement of fans can be increased further by two 140- or 120 mm fans Without the 525" cage three 120 mm fans would be compatible Alternatively a 280- or 360 mm radiator can be installed & this is installed by means of a side-mounted retractable bracket in the roof The installation of a radiator can be hindered due to installed RAM modules
- & this can also occasionally result in fans & the radiator being unable to be mounted in the middle but instead are shifted to the left where the greatest amount of space between the motherboard & the fanradiator is available As an alternative to the installation of fans it is also possible to install a 120- or 140 mm radiator in the rear Taken in combination this results in strong air intake heat removal as well as a superabundance of space for watercooling components The white metal cover for the PSU shroud something that greatly contributes to the appearance of a tidy interior also offers two mounting bays for 25" or 35" data storage devices Alternatively a vibration-dampening pump bracket can be mounted in this location Should this be installed in conjunction with a larger reservoir or a radiator be mounted behind the front panel a section of the horizontal divider can be removed something that expands the mounting possibilities for pumps & reservoirs even further There are also many options in regards to the installation of drives & watercooling There is also the option to install up to five further 35" or 25" drives directly behind the front
- the drive trays will be screwed into the motherboard tray On the reverse of the motherboard tray is a generous 3.5cm of space for tidy cable management Furthermore a 25" bracket with a " Drop-n-Lock" mechanism for a 25" drive is available with another one next to it & a final option located on the PSU shroud The optional PWM fan hub (LULS-239) can regulate up to eight 3-pin fans via a 3-pin PWM board connector Note Just a single 360 mm radiator can be installed either above in the roof or in the front Technical Details

Dimensions 235 x 480 x 500 mm (W x H x D) Weight approx 74kg Material Steel (body) tempered glass (side window) Plastic with brushed aluminium look (front) Colour Black white Form Factor E-ATX (up to 264 mm wide) ATX Micro-ATX Mini-ITX Total Possible Fans 2x 140 3x 120 mm (Front) 2x 140 3x 120 mm (Roof with 525" only 2x 140 120 mm) 1x 140 120 mm (Rear) Pre-Installed 1x 140 mm (Rear; PH-F140SP 1200 RPM 19 d B (A); with PH-FF140RGBP) 1x 140 mm (Front; PH-F140SP 1200 RPM 19 d B (A); with PH-FF140RGBP) Radiator Mountings (may partially block HDD- andor fan slots) 1x max 280360 mm (Front 360 mm only without 525" cage) 1x max 140120 mm (Rear) 1x max 280360 mm (Roof 360 mm only without 525" cage) Filter Front roof PSU (removable) Drive Bays 1x 525" (external bay removable) 2x 35" (internal; uncoupled; 6x optional via separately available HDD bracket GEPH-032) 3x 25" (internally; 2x instead of 35"; 1x via SSD bracket behind the motherboard tray with " Drop-n-Lock" 1x or 2x optional via in addition available SSD bracket GEPH-009 or GEPH-010) Power Supply 1x Standard ATX (optional) Expansion Slots 7 IO Panel 2x USB (Universal Serial Bus) 30 1x Audio In 1x Out RGB Control Maximum GPU Length 420 300 mm (without with HDD brackets) Maximum CPU Cooler Height 194 mm Maximum PSU Length 318 mm guarantee 5 Years



...

Beautifully crafted & engineered to maximize cooling potential with its amazing expansion flexibiltiy the Enthoo Pro is the budget friendly mid-tower from Phanteks Embracing many features from the Enthoo Primo & Luxe without the price tag This case has mulitple radiator support removable ssd bracket closed HDD panel & hook & loop fastener cable management The Enthoo Pro trying to establish its own solid reputation like the award winning Enthoo Primo The Enthoo Pro is designed to house the most formidable gaming systems on the market today Design is paramount as ever & the Enthoo Pro retains the clean elegant design from the Enthoo Primo Finished in a high quality brushed aluminium appearance & paired with a stealthy interior design the Enthoo Pro is a gaming chassis that surpasses rivals & offers much more to the hardware enthusiast Functionalities & Cooling- Dual repositionable & removable harddrive cages- Closed HDD panel- Removable Drop-N-Lock SSD bracket- Fully equiped with dustfilters (1x top 1x front 2x bottom)- Clean cable management using Phanteks&8217; pre-installed Hoop-N-Loop cable ties- MOD friendly structure
- fastened by screws instead of pins- Removable Reservoir Bracket- High cooling capacity (capable of housing 8x 120mm fans 7x 140mm fans 2x 200mm fans)- Comes with 2 Phanteks premium fans 1x 200mm in front &38; 1x 140mm in rear Watercooling Support- 4 different installation areas for single to triple radiators- Reservoir mounting points

Specification- Dimension 235 mm x 535 mm x 550 mm (W x H x D)- Form Factor Full tower- Material (s) Brushed plastic Steel chassis- Motherboard support ATX EATX m ATX SSI EEB- Front IO 2x USB (Universal Serial Bus) 30 2x USB (Universal Serial Bus) 20 Mic Headphone- Side window Yes split-window design (optional closed window sidepanel)EXPANSION &38; DRIVE BAYS- Expansion slots 8- External 525” 3- Internal 35” 6 (2x 3HDD cages)- Internal 25” 7 (1x SSD bracket)COOLING 120mm fan 140mm fan 200mm fan- Front 2x 2x 1x (included)- Top 3x 3x 1x- Rear 1x 1x (1x included)- Bottom 2x 1x- HDD cage 2x -LIQUID COOLING 120mm radiator 140mm radiator- Front Up to 240 -- Top Up to 360 Up to 420- Rear 120 140- Bottom Up to 240 140CLEARANCE- Graphic card 347 mm (without HDD cages 472 mm)- CPU cooler 193 mm- Cable management 27 mm (39 mm at PSU area)- Radiator (TOP) 65 mm to motherboard- Warranty 5 Years


...

Beautifully crafted & engineered to maximize cooling potential with its amazing expansion flexibiltiy the Enthoo Pro is the budget friendly mid-tower from Phanteks Embracing many features from the Enthoo Primo & Luxe without the price tag This case has mulitple radiator support removable ssd bracket closed HDD panel & hook & loop fastener cable management The Enthoo Pro trying to establish its own solid reputation like the award winning Enthoo Primo The Enthoo Pro is designed to house the most formidable gaming systems on the market today Design is paramount as ever & the Enthoo Pro retains the clean elegant design from the Enthoo Primo Finished in a high quality brushed aluminium appearance & paired with a stealthy interior design the Enthoo Pro is a gaming chassis that surpasses rivals & offers much more to the hardware enthusiast Functionalities & Cooling- Dual repositionable & removable harddrive cages- Closed HDD panel- Removable Drop-N-Lock SSD bracket- Fully equiped with dustfilters (1x top 1x front 2x bottom)- Clean cable management using Phanteks&8217; pre-installed Hoop-N-Loop cable ties- MOD friendly structure
- fastened by screws instead of pins- Removable Reservoir Bracket- High cooling capacity (capable of housing 8x 120mm fans 7x 140mm fans 2x 200mm fans)- Comes with 2 Phanteks premium fans 1x 200mm in front &38; 1x 140mm in rear Watercooling Support- 4 different installation areas for single to triple radiators- Reservoir mounting points

Specification- Dimension 235 mm x 535 mm x 550 mm (W x H x D)- Form Factor Full tower- Material (s) Brushed plastic Steel chassis- Motherboard support ATX EATX m ATX SSI EEB- Front IO 2x USB (Universal Serial Bus) 30 2x USB (Universal Serial Bus) 20 Mic Headphone- Side window Yes split-window design (optional closed window sidepanel)EXPANSION &38; DRIVE BAYS- Expansion slots 8- External 525” 3- Internal 35” 6 (2x 3HDD cages)- Internal 25” 7 (1x SSD bracket)COOLING 120mm fan 140mm fan 200mm fan- Front 2x 2x 1x (included)- Top 3x 3x 1x- Rear 1x 1x (1x included)- Bottom 2x 1x- HDD cage 2x -LIQUID COOLING 120mm radiator 140mm radiator- Front Up to 240 -- Top Up to 360 Up to 420- Rear 120 140- Bottom Up to 240 140CLEARANCE- Graphic card 347 mm (without HDD cages 472 mm)- CPU cooler 193 mm- Cable management 27 mm (39 mm at PSU area)- Radiator (TOP) 65 mm to motherboard- Warranty 5 Years


...

Over the last few years Phanteks & the Enthoo Evolv ITX cases have made quite a name for themselves thanks to their unique blend of quality & unique aesthetics The arrival of the new Enthoo Evolv ITX Mini-ITX case represents a fresh spin on current trends with a side-panel constructed entirely of premium tempered glass Doing justice to the commensurately high-end hardware has in this case meant the welcome addition of RGB lighting as well as integrated lighting controls THE FEATURES OF THE PHANTEKS ENTHOO EVOLV ITX MINI-ITX CASE AT A GLANCETimeless classic design with a unique aesthetic Premium tempered-glass side panel Impressive RGB lighting & integrated controls 2x USB (Universal Serial Bus) 30 ports behind the front panel Space for 280 mm radiators & pumps Space for CPU coolers up to 20 cm in height & graphics cards up to 33 cm in length Clean & sleek interior with exceptional manufacturing quality THE UNIQUE AESTHETIC OF A REFINED CASEThe moment you set eyes upon this sleek & timeless case it&s clear that Phanteks has stayed true to the roots of the Enthoo Evolv series Its measurements remain the same meaning that the Enthoo Evolv ITX with tempered-glass is just as wide (23 cm) deep (395 cm) & high (375 cm) as its popular predecessors The interior of the case like the right side of the case consists of painted black steel the removable front panel is made from plastic but comes adorned with a large powder-coated steel panel The large tempered-glass side panel on the left side makes this case somewhat unique At the bottom of the case towards the front is located a narrow light strip which when the system is switched on glows & can be controlled via the RGB button of the case or via RGB LED adapter cable from the motherboard Air-inlets for cooling have been integrated into the black surfaces so as to not impinge upon the minimalist aspirations of the case PLENTY OF SPACE FOR AIR- & WATERCOOLINGLocated towards the rear is a pre-installed 140 mm fan & two additional (optional) 140- or 120 mm fans can be installed behind the front panel The front of the case & the space beneath the PSU both come with removable dust filters Two further 140- or 120 mm fans can be installed in the roof of the Evolv Alternatively a 280 mm or 240 mm heat exchanger with a width of 54 mm (140 mm wide) or 74 mm (120 mm wide) can be installed to the motherboard tray (please check RAM module clearances!) via a bracket that pulls out sideways This should prevent radiators from colliding with installed RAM modules A 240 mm radiator can also be installed in the front Fortunately Phanteks has not elected to cut any of their famed water-cooling features originating from the larger siblings of the Enthoo series in this smaller Enthoo Evolv ITX To this end a multifunctional bracket with the " Phanteks" logo is located directly above the discrete HDD cage which offers compatibility with two 35" hard drives (or small SSDs) Although the case allows graphics cards up to 33 cm in length to be discretely tucked away the bracket allows several additional options One can either install the bundled universal tube reservoir bracket or you can install optionally available accessories like SSD mounting bays for 1 or 2 additional 25" drives (CA-010-PT or CA-011-PT) an HDD bracket (CA-023-PT) or even the Phanteks pump bracket (CA-008-PT) The reverse of the Mini-ITX tray where a spacious 28 mm area is reserved for cable management also saves space for the PWM fan hub (CA-009-PT) from Phanteks This allows the automatically regulated operation of up to eight 3-pin fans via a single 4-pin PWM port on an m ITX motherboard In the upper front of the case comes a factory-installed 25" bracket complete with a "drop-n-lock" mechanism for a small 25" drive The whole lower section of the Evolv ITX is reserved for an ATX power supply up to 212 cm in length as well as a double HDD cage in addition an optional Phanteks pump bracket allows users to attach the reservoir to the multifunctional bracket & use the additional pump bracket in the lower section of the front as long as the system only requires a single large & quiet SSD as a boot drive Technical Details Dimensions 230 x 375 x 395 mm (W x H x D) Weight approx 6kg Material Steel (body right side panel covering on front panel) plastic (front panel) tempered glass (left side panel) Colour Black Form-Factor Mini-ITXTotal Possible Fans 2x 140120 mm (Front)1x 140120 mm (Rear)2x 140120 mm (Roof) Pre-Installed Fans 1x 140 mm (Rear; PH-140SP max 1200 RPM 19 d B (A)) Radiator Mountings (partly dependent upon HDD- andor fan slots)1x max 240 mm (Front)1x max 140120 mm (Rear)1x max 280240 mm (Roof) Distance to motherboard tray in 120 mm format 54 mm Distance to motherboard tray in 140 mm format 74 mm Please check maximum height of RAM to prevent incompatibility! Filter Front PSU (removable) Drive Bays 2x 35" 3x 25"PSU 1x Standard ATX (optional) Expansion Slots 2IO Panel 2x USB (Universal Serial Bus) 30 (internal connection)1x Audio In Out RGB Controller Maximum GPU Length 330 mm Maximum CPU Cooler Height 200 mm Maximum PSU Length 212 mm (with HDD cage) ...

Over the last few years Phanteks & the Enthoo Evolv ITX cases have made quite a name for themselves thanks to their unique blend of quality & unique aesthetics The arrival of the new Enthoo Evolv ITX Mini-ITX case represents a fresh spin on current trends with a side-panel constructed entirely of premium tempered glass Doing justice to the commensurately high-end hardware has in this case meant the welcome addition of RGB lighting as well as integrated lighting controls THE FEATURES OF THE PHANTEKS ENTHOO EVOLV ITX MINI-ITX CASE AT A GLANCETimeless classic design with a unique aesthetic Premium tempered-glass side panel Impressive RGB lighting & integrated controls 2x USB (Universal Serial Bus) 30 ports behind the front panel Space for 280 mm radiators & pumps Space for CPU coolers up to 20 cm in height & graphics cards up to 33 cm in length Clean & sleek interior with exceptional manufacturing quality THE UNIQUE AESTHETIC OF A REFINED CASEThe moment you set eyes upon this sleek & timeless case it&s clear that Phanteks has stayed true to the roots of the Enthoo Evolv series Its measurements remain the same meaning that the Enthoo Evolv ITX with tempered-glass is just as wide (23 cm) deep (395 cm) & high (375 cm) as its popular predecessors The interior of the case like the left side panel of the case consists of black painted steel but in this revision the motherboard tray divider drive cage & PSU shroud shine through the tempered glass side panel in a radiant high-contrast red At the bottom of the case towards the front is located a narrow light strip which when the system is switched on glows & can be controlled via the RGB button of the case or via RGB LED adapter cable from the motherboard Air-inlets for cooling have been integrated into the black surfaces so as to not impinge upon the minimalist aspirations of the case PLENTY OF SPACE FOR AIR- & WATERCOOLINGLocated towards the rear is a pre-installed 140 mm fan & two additional (optional) 140- or 120 mm fans can be installed behind the front panel The front of the case & the space beneath the PSU both come with removable dust filters Two further 140- or 120 mm fans can be installed in the roof of the Evolv Alternatively a 280 mm or 240 mm heat exchanger with a width of 54 mm (140 mm wide) or 74 mm (120 mm wide) can be installed to the motherboard tray (please check RAM module clearances!) via a bracket that pulls out sideways This should prevent radiators from colliding with installed RAM modules A 240 mm radiator can also be installed in the front Fortunately Phanteks has not elected to cut any of their famed water-cooling features originating from the larger siblings of the Enthoo series in this smaller Enthoo Evolv ITX To this end a multifunctional bracket with the " Phanteks" logo is located directly above the discrete HDD cage which offers compatibility with two 35" hard drives (or small SSDs) Although the case allows graphics cards up to 33 cm in length to be discretely tucked away the bracket allows several additional options One can either install the bundled universal tube reservoir bracket or you can install optionally available accessories like SSD mounting bays for 1 or 2 additional 25" drives (CA-010-PT or CA-011-PT) an HDD bracket (CA-023-PT) or even the Phanteks pump bracket (CA-008-PT) The reverse of the Mini-ITX tray where a spacious 28 mm area is reserved for cable management also saves space for the PWM fan hub (CA-009-PT) from Phanteks This allows the automatically regulated operation of up to eight 3-pin fans via a single 4-pin PWM port on an m ITX motherboard In the upper front of the case comes a factory-installed 25" bracket complete with a "drop-n-lock" mechanism for a small 25" drive The whole lower section of the Evolv ITX is reserved for an ATX power supply up to 212 cm in length as well as a double HDD cage in addition an optional Phanteks pump bracket allows users to attach the reservoir to the multifunctional bracket & use the additional pump bracket in the lower section of the front as long as the system only requires a single large & quiet SSD as a boot drive Technical Details Dimensions 230 x 375 x 395 mm (W x H x D) Weight approx 6kg Material Steel (body right side panel covering on front panel) plastic (front panel) tempered glass (left side panel) Colour Black red Form-Factor Mini-ITXTotal Possible Fans 2x 140120 mm (Front)1x 140120 mm (Rear)2x 140120 mm (Roof) Pre-Installed Fans 1x 140 mm (Rear; PH-140SP max 1200 RPM 19 d B (A)) Radiator Mountings (partly dependent upon HDD- andor fan slots)1x max 240 mm (Front)1x max 140120 mm (Rear)1x max 280240 mm (Roof) Distance to motherboard tray in 120 mm format 54 mm Distance to motherboard tray in 140 mm format 74 mm Please check maximum height of RAM to prevent incompatibility! Filter Front PSU (removable) Drive Bays 2x 35" 3x 25"PSU 1x Standard ATX (optional) Expansion Slots 2IO Panel 2x USB (Universal Serial Bus) 30 (internal connection)1x Audio In Out RGB Controller Maximum GPU Length 330 mm Maximum CPU Cooler Height 200 mm Maximum PSU Length 212 mm (with HDD cage) ...

Over the last few years Phanteks & the Enthoo Evolv ITX cases have made quite a name for themselves thanks to their unique blend of quality & unique aesthetics The arrival of the new Enthoo Evolv ITX Mini-ITX case represents a fresh spin on current trends with a side-panel constructed entirely of premium tempered glass Doing justice to the commensurately high-end hardware has in this case meant the welcome addition of RGB lighting as well as integrated lighting controls THE FEATURES OF THE PHANTEKS ENTHOO EVOLV ITX MINI-ITX CASE AT A GLANCETimeless classic design with a unique aesthetic Premium tempered-glass side panel Impressive RGB lighting & integrated controls 2x USB (Universal Serial Bus) 30 ports behind the front panel Space for 280 mm radiators & pumps Space for CPU coolers up to 20 cm in height & graphics cards up to 33 cm in length Clean & sleek interior with exceptional manufacturing quality THE UNIQUE AESTHETIC OF A REFINED CASEThe moment you set eyes upon this sleek & timeless case it&s clear that Phanteks has stayed true to the roots of the Enthoo Evolv series Its measurements remain the same meaning that the Enthoo Evolv ITX with tempered-glass is just as wide (23 cm) deep (395 cm) & high (375 cm) as its popular predecessors The interior of the case like the left side panel of the case consists of black painted steel but in this revision the motherboard tray divider drive cage & PSU shroud shine through the tempered glass side panel in a radiant high-contrast red At the bottom of the case towards the front is located a narrow light strip which when the system is switched on glows & can be controlled via the RGB button of the case or via RGB LED adapter cable from the motherboard Air-inlets for cooling have been integrated into the black surfaces so as to not impinge upon the minimalist aspirations of the case PLENTY OF SPACE FOR AIR- & WATERCOOLINGLocated towards the rear is a pre-installed 140 mm fan & two additional (optional) 140- or 120 mm fans can be installed behind the front panel The front of the case & the space beneath the PSU both come with removable dust filters Two further 140- or 120 mm fans can be installed in the roof of the Evolv Alternatively a 280 mm or 240 mm heat exchanger with a width of 54 mm (140 mm wide) or 74 mm (120 mm wide) can be installed to the motherboard tray (please check RAM module clearances!) via a bracket that pulls out sideways This should prevent radiators from colliding with installed RAM modules A 240 mm radiator can also be installed in the front Fortunately Phanteks has not elected to cut any of their famed water-cooling features originating from the larger siblings of the Enthoo series in this smaller Enthoo Evolv ITX To this end a multifunctional bracket with the " Phanteks" logo is located directly above the discrete HDD cage which offers compatibility with two 35" hard drives (or small SSDs) Although the case allows graphics cards up to 33 cm in length to be discretely tucked away the bracket allows several additional options One can either install the bundled universal tube reservoir bracket or you can install optionally available accessories like SSD mounting bays for 1 or 2 additional 25" drives (CA-010-PT or CA-011-PT) an HDD bracket (CA-023-PT) or even the Phanteks pump bracket (CA-008-PT) The reverse of the Mini-ITX tray where a spacious 28 mm area is reserved for cable management also saves space for the PWM fan hub (CA-009-PT) from Phanteks This allows the automatically regulated operation of up to eight 3-pin fans via a single 4-pin PWM port on an m ITX motherboard In the upper front of the case comes a factory-installed 25" bracket complete with a "drop-n-lock" mechanism for a small 25" drive The whole lower section of the Evolv ITX is reserved for an ATX power supply up to 212 cm in length as well as a double HDD cage in addition an optional Phanteks pump bracket allows users to attach the reservoir to the multifunctional bracket & use the additional pump bracket in the lower section of the front as long as the system only requires a single large & quiet SSD as a boot drive Technical Details Dimensions 230 x 375 x 395 mm (W x H x D) Weight approx 6kg Material Steel (body right side panel covering on front panel) plastic (front panel) tempered glass (left side panel) Colour Black red Form-Factor Mini-ITXTotal Possible Fans 2x 140120 mm (Front)1x 140120 mm (Rear)2x 140120 mm (Roof) Pre-Installed Fans 1x 140 mm (Rear; PH-140SP max 1200 RPM 19 d B (A)) Radiator Mountings (partly dependent upon HDD- andor fan slots)1x max 240 mm (Front)1x max 140120 mm (Rear)1x max 280240 mm (Roof) Distance to motherboard tray in 120 mm format 54 mm Distance to motherboard tray in 140 mm format 74 mm Please check maximum height of RAM to prevent incompatibility! Filter Front PSU (removable) Drive Bays 2x 35" 3x 25"PSU 1x Standard ATX (optional) Expansion Slots 2IO Panel 2x USB (Universal Serial Bus) 30 (internal connection)1x Audio In Out RGB Controller Maximum GPU Length 330 mm Maximum CPU Cooler Height 200 mm Maximum PSU Length 212 mm (with HDD cage) ...