Phanteks&8217; budget-friendly Eclipse P400S now sports an all new tempered glass side panel The new variant of the Eclipse Series still features the solid build quality built-in RGB lighting controller open interior design compatibility with all-in-one liquid cooling The P400S retains the 3 speed fan controller & noise deadening material for a more silent build The tempered glass side panel of the Eclipse P400S offers elegance & style to your system build The Phanteks Eclipse P400S can support 360mm radiators 395mm VGA cards 160mm CPU coolers & up to 270mm PSU's for impressive compatibility with enthusiast level hardware The Phanteks Eclipse range are also fully compatible with the new Asus Aura RGB motherboard range & through use of the Phanteks RGB LED adapter cable (sold separately) it can be synchronised with the Aura software to control both interior & exterior RGB functionality The Phanteks Eclipse P400S range represents outstanding value for your money combining a host of attractive features with a extremely well built & aesthetically pleasing structure at a pricepoint that commands attention FEATURES- Full Metal Body- Tempered Glass Side Panel- 300mm Phanteks RGB LED Strip Included- Clean interior
- Featuring a PSU shroud- Soundproofing Panels Top Covers- Fully equipped with dust filters- Ready for AIO Watercooling
- Supports up to 360mm radiators
- Equipped with 2 x 120mm fans- 25 mm cable management space additional cable compartment in bottom along with Phanteks Hook & loop fastener cable ties- Front IO (Hidden)
- 2 x USB30 Headphone Mic LED Control Reset 3-Speed Fan Controller- RGB Power Light Ambient Down Light choose from 10 different colours compatible with Phanteks RGB LED Strips

Specification- Dimension 210 mm x 465 mm x 470 mm (W x H x D) 83 in x 183 in x 185 in- Form Factor Midtower- Material (s) Steel chassis steel exterior ABS Tempered Glass side panel- Colour White- Motherboard support ATX Micro ATX Mini ITX E-ATX (up to 272mm wide cannot use rubber grommets)- Front IO 2x USB (Universal Serial Bus) 30 Mic Headphone Reset RGB LED control- Side window Yes- Soundproofing Panels Yes Front Top Right Side- Expansion slots 7- Internal 35 6x (2x included)- Internal (dedicated) 25” 2x (2x included)- Cooling Front
- 120mm Fan x 3 (1 included) 140mm Fan x 2 Top
- 120mm Fan x 2 140mm Fan x 2 Rear
- 120mm Fan x 1 (included)- Liquid Cooling Front
- Up to 360mm (with removal of midplate cover) or 280mm (without removal) Rear
- 120mm- GPU Clearance 395mm 280mm (with optional HDD brackets installed)- CPU Cooler 160mm- Cable Management 25mm- PSU (including cable) 270mm- Model PH-EC416PSTGWT- Net Weight 7kg (154 lbs)- Gross Weight 8kg (176 lbs)- Package Dimension 300 mm x 555 mm x 520 mm (Wx Hx D) 118 in x 219 in x 205 in- Warranty 5 Years










...

Phanteks continues its user friendly designed PC case range with the new Eclipse Series P400S Without much effort the P400S allows users to create a clean & beautiful system Ambient RGB illumination adds character while the solid metal exterior gives the case a simple elegant design The P400S is suitable for beginners & experienced systems builders with all the extra features The P400S comes with sound damping panels & a 3-speed fan controller to enhance acoustical performance The Phanteks Eclipse P400S can support 360mm radiators 160mm CPU coolers & up to 270mm PSU's for impressive compatibility with enthusiast level hardware The Phanteks Eclipse range are also fully compatible with the new Asus Aura RGB motherboard range & through use of the Phanteks RGB LED adapter cable (sold separately) it can be synchronised with the Aura software to control both interior & exterior RGB functionality The Phanteks Eclipse P400S range represents outstanding value for your money combining a host of attractive features with a extremely well built & aesthetically pleasing structure at a pricepoint that commands attention FEATURES- Full Metal Body- Clean interior
- Featuring a PSU shroud- Soundproofing Panels Top Covers- Fully equipped with dust filters- Ready for AIO Watercooling
- Supports up to 360mm radiators
- Equipped with 2 x 120mm fans- 25 mm cable management space additional cable compartment in bottom along with Phanteks Hook & loop fastener cable ties- Front IO (Hidden)
- 2 x USB30 Headphone Mic LED Control Reset 3-Speed Fan Controller- RGB Power Light Ambient Down Light choose from 10 different colours compatible with Phanteks RGB LED Strips (sold separately)

Specification- Dimension 210 mm x 465 mm x 470 mm (W x H x D) 83 in x 183 in x 185 in- Form Factor Midtower- Material (s) Steel chassis steel exterior ABS- Colour White- Motherboard support ATX Micro ATX Mini ITX E-ATX (up to 272mm wide cannot use rubber grommets)- Front IO 2x USB (Universal Serial Bus) 30 Mic Headphone Reset LED control 3-Speed Fan Controller- Side window No- Soundproofing Panels Yes Front Top Sides- Expansion slots 7- Internal 35 6x (2x included)- Internal (dedicated) 25” 2x (2x included)- Cooling Front
- 120mm Fan x 3 (1 included) 140mm Fan x 2 Top
- 120mm Fan x 2 140mm Fan x 2 Rear
- 120mm Fan x 1 (included)- Liquid Cooling Front
- Up to 360mm (with removal of midplate cover) or 280mm (without removal) Rear
- 120mm- GPU Clearance 395mm 280mm (with optional HDD brackets installed)- CPU Cooler 160mm- Cable Management 25mm- PSU (including cable) 270mm- Model PH-EC416PSCWT- Net Weight 7kg (154 lbs)- Gross Weight 8kg (176 lbs)- Package Dimension 300 mm x 555 mm x 520 mm (Wx Hx D) 118 in x 219 in x 205 in- Warranty 5 Years










...

Upgrading storage capacity to your Enthoo cases can now be easier with the HDD brackets A single slot HDD bracket is available for the Enthoo Series Line to help maximize your storage FEATURES- Model PH-HDDKT01- Dimension 104 mm x 22 mm x 140 mm (W x H x D)
- 409in x 087in x 074in- Currently Compatible with the Enthoo Mini XL Evolv ITX & the Enthoo Primo
...

The EVOLV MATX Glass is the successor of the very first Evolv case & combines 3mm anodized aluminum with dual 3mm tempered glass side panels System builders & watercooling enthusiasts can now present their build with a premium touch The EVOLV MATX is equipped with innovative features amazing (water)cooling potential & RGB illumination The original Evolv case marked Phanteks first foray into the Evolv line of cases which led to the popular Evolv ITXATX models & the highly successful Evolv ATX Glass This particular model in Black retains most of the features found on the original Evolv but adds a plethora of desirable features to further improve an already great case The first & foremost is a pair of 3mm tempered glass side panels with the right hand glass panel heavily tinted to only show any installed SSD drives This means that cable management is hidden without losing the premium feel & look of tempered glass panels Watercooling support has been enhanced with up to 360mm radiators now possible on the front of the Evolv & the 200mm front fan has been changed to a high performance 140mm version with another 140mm in the rear A pair of 25 SSD brackets are now included as standard to mount your drives behind the motherboard plate In addition the Evolv MATX Glass now has RGB functionality with compatibility for Asus Aura MSI Mystic Light Sync & additional RGB motherboards The full suite of Phanteks RGB products are also compatible The Phanteks Evolv M-ATX Glass represents another excellent addition into the Phanteks range of chassis

Specification- Dimension 230 mm x 453 mm x 400 mm (W x H x D) 91 in x 178 in x 157 in- Colour Satin Black- Form Factor Micro tower- Material (s) Aluminum (3mm) Tempered glass (3mm) Steel chassis- Motherboard support Micro ATX Mini ITX- Front IO 2x USB (Universal Serial Bus) 30 Mic Headphone RGB LED control- Side window Yes tempered glass panels (left & right)- Expansion slots 4- Internal 35” 2x- Internal (dedicated) 25” 2x- Cooling Front
- 120mm Fan x 3 140mm Fan x 2 (1 included) Top
- 120mm Fan x 2 140mm Fan x 2 Rear
- 120mm Fan x 1 140mm Fan x 1 (included)- Liquid Cooling Front
- Up to 360mm (with removal of 35 HDD brackets) or 280mm (without removal) Top
- Up to 280mm Rear
- Up to 140mm- Clearance Graphic card 319 mm (125 in) CPU cooler 192 mm (75 in) Cable management 26 mm (10 in) PSU (including cable) 216 mm (85 in)- Model PH-ES314ETGBK- Net Weight 9kg (198 lbs)- Gross Weight 10kg (220 lbs)- Package Dimension 308 mm x 540 mm x 463 mm (Wx Hx D)- Warranty 5 Years







...

The EVOLV MATX Glass is the successor of the very first Evolv case & combines 3mm anodized aluminum with dual 3mm tempered glass side panels System builders & watercooling enthusiasts can now present their build with a premium touch The EVOLV MATX is equipped with innovative features amazing (water)cooling potential & RGB illumination The original Evolv case marked Phanteks first foray into the Evolv line of cases which led to the popular Evolv ITXATX models & the highly successful Evolv ATX Glass This particular model in Gunmetal Grey retains most of the features found on the original Evolv but adds a plethora of desirable features to further improve an already great case The first & foremost is a pair of 3mm tempered glass side panels with the right hand glass panel heavily tinted to only show any installed SSD drives This means that cable management is hidden without losing the premium feel & look of tempered glass panels Watercooling support has been enhanced with up to 360mm radiators now possible on the front of the Evolv & the 200mm front fan has been changed to a high performance 140mm version with another 140mm in the rear A pair of 25 SSD brackets are now included as standard to mount your drives behind the motherboard plate In addition the Evolv MATX Glass now has RGB functionality with compatibility for Asus Aura MSI Mystic Light Sync & additional RGB motherboards The full suite of Phanteks RGB products are also compatible The Phanteks Evolv M-ATX Glass represents another excellent addition into the Phanteks range of chassis

Specification- Dimension 230 mm x 453 mm x 400 mm (W x H x D) 91 in x 178 in x 157 in- Colour Gunmetal Grey- Form Factor Micro tower- Material (s) Aluminum (3mm) Tempered glass (3mm) Steel chassis- Motherboard support Micro ATX Mini ITX- Front IO 2x USB (Universal Serial Bus) 30 Mic Headphone RGB LED control- Side window Yes tempered glass panels (left & right)- Expansion slots 4- Internal 35” 2x- Internal (dedicated) 25” 2x- Cooling Front
- 120mm Fan x 3 140mm Fan x 2 (1 included) Top
- 120mm Fan x 2 140mm Fan x 2 Rear
- 120mm Fan x 1 140mm Fan x 1 (included)- Liquid Cooling Front
- Up to 360mm (with removal of 35 HDD brackets) or 280mm (without removal) Top
- Up to 280mm Rear
- Up to 140mm- Clearance Graphic card 319 mm (125 in) CPU cooler 192 mm (75 in) Cable management 26 mm (10 in) PSU (including cable) 216 mm (85 in)- Model PH-ES314ETGAG- Net Weight 9kg (198 lbs)- Gross Weight 10kg (220 lbs)- Package Dimension 308 mm x 540 mm x 463 mm (Wx Hx D)







...

Enthoo Evolv Shift combines the striking design of the Evolv series with new innovative features to make for a truly eye-catching Mini-ITX case The Evolv shift has a very small footprint nevertheless thanks to its clever layout it is capable of holding an extensive range of powerful gaming hardware The shift can also be placed horizontally cutting an attractive figure in any living room with its combination of aluminium & tempered glass THE FEATURES OF THE PHANTEKS ENTHOO EVOLV SHIFT MINI-ITX CASEStriking aluminium & tempered-glass design Perfect case for stylish living room PCs Graphics cards up to 35 cm in length GPU bracket can be rotated Supports a wide range of RGB-LED controllers Can be set vertically or horizontally PREMIUM PC CASE FOR THE LIVING ROOMThe Enthoo Evolv Shift offers space for gaming graphics cards up to 35 cm in length & according to Phanteks is ideally suited for the installation of Ai O water-coolers With its aluminium surfaces & tempered glass this Mini-ITX case fits seamlessly into any designer living environment & can be placed in a standing orientation similar to Hi-Fi speakers or placed horizontally like a games console The graphics card is mounted with the accompanying PCIe x 16 riser card in such a way as to allow either the backplate or the GPU cooler to be visible from the exterior The Mini-ITX motherboard is built in parallel to the graphics card with the back panel facing upwards The ports on the IO panel as well as the graphics card are hidden beneath a cover to allow all connected cables to be redirected through a gap in the back COOLING STORAGE &38; ADDITIONAL FEATURESA 140 mm fan comes pre-installed from the factory at motherboard height in the Evolv Shift & this helps to exhaust warm air out of the case from the front in addition the warm air produced by the hardware is also removed via the vents built into the roof of the case A 120 mm fan or radiator for an All-in-One watercooler can be installed in the lower section while a further 120mm fanradiator can be installed in the front A 35 hard drive or a 25 SSD can be installed in the rear & two further SSDs can be located in the front using the SSD brackets
- at the expense of the bottom 140 mm fans The baseplate in the back used for mounting the SSDHDD can also be removed to make hardware installation easier For the best view of the RGB-LEDs in the installed hardware the integrated LED lighting is compatible with Aura Sync from ASUS RGB Fusion from Gigabyte as well as MSI's Mystic Light Sync all of which can be controlled at the push of a button The IO panel of the Mini-ITX case is located to the left side on the rear of the case & offers two USB (Universal Serial Bus) 30 ports for gaming peripherals or external USB (Universal Serial Bus) hard drives as well as USB (Universal Serial Bus) sticks In typical Phanteks fashion there are several points with Hook & loop fastener ties as well as rubberised cable guides for cable management in the case design As well as air vents in the aluminium on the front & rear there are also dust filters in the casing to offer the system further protection Technical Details Dimensions 170 x 470 x 274 mm (W x H x D) Material Steel aluminium tempered glass Colour Gunmetal Grey Form Factor Mini-ITXTotal Possible Fans 2x 140120 mm (front)1x 140120 mm (lower) Pre-Installed 1&215; 140 mm (front) Radiator Mountings (partially dependent upon HDD andor fan slots)1x max 120 mm (front)1x max 120 mm (lower) Filter Front back lower (removable) Drive Trays 1x 35 (internal if no radiator is installed)3x 25 (internal 2 SSD brackets available additional brackets can be acquired separately) Power Supply 1x SFX or SFX-L (optional) Expansion Slots 2IO Panel 2x USB (Universal Serial Bus) 301x RGB Switch Maximum Graphics Card Length 350 mm Maximum CPU Cooler Height 82 mm Guarantee 5 Years
...

Phanteks stands for innovation quality & uniqueness
- a reputation that the renowned company has earned in a short period of time
...

Phanteks&8217; new Enthoo Pro M variant will now include a tempered glass side panel System builders & watercooling enthusiasts can now showcase their build in style! The ENTHOO PRO M focuses on delivering great design without compromising price Water-cooling builds will be a simple task with the help of our innovative radiator bracket & pump mounting locations Whether you are a system builder or water-cooling enthusiast the PRO M will give you unlimited possibilities Enthoo Pro M

Includes:: 1 x 140mm fan in the rear & front Ability to upgrade to additional fans is possible All fans included are Phanteks&8217; new redesigned & better performing SP series fans FEATURES- Brushed aluminum look- Clean interior
- Hidden PSU & HDD&8217;s- Optimal airflow
- Direct airflow to CPU GPU- Comes with 2 Phanteks premium fans
- 1x PH-F140SP in frontrear (140mm)- 3 different installation areas for radiators (120mm or 140mm form factor)
- Reservoir mounting locations- 1x Drop-N-Lock SSD brackets included- Removable HDD cage for installation of long PSU&8217;s (&62;180mm) waterpump- Equipped with removable dustfilters (1x front 1x bottom 1x top magnetic)- Clean cable management using Phanteks' preinstalled Hoop-N-Loop cable ties- Removable optical drive cage SPECIFICATIONS- Dimension 235 mm x 480 mm x 500 mm (W x H x D) 925 in x 189 in x 197 in- Colour Black- Form Factor Midtower Chassis- Material (s) Plastic Exterior Steel Chassis Tempered Glass side window
- Motherboard Support E-ATX (up to 264mm wide) ATX Micro ATX Mini ITX- Front IO 2x USB (Universal Serial Bus) 30 Mic Headphone Reset- Side Window Yes- Expansion slots 7- Internal 35 8x (2x included)- Internal 25 (dedicated) 3x (1x included)- Cooling 120mm Fan
- Front 2x (3x without ODD Cage) Top 3x Rear 1x- Cooling 140mm Fan
- Front 2x (1 included) Top 2x Rear 1x (1 included)- Liquid Cooling 120mm Radiator
- Front Up to 360mm Top Up to 360mm Rear 120mm- Liquid Cooling 140mm Radiator
- Front Up to 280mm Top Up to 280mm Rear 140mm- Graphic card Clearance 420 mm (1654 in) No HDD brackets 300 mm (118 in) HDD brackets installed- PSU Clearance 318 mm (125 in)- CPU cooler Clearance 194 mm (76 in)- Cable management 3.5cm (138 in)- Memory clearance (motherboard
- fan) 120mm 68 mm (268 in) 140mm 48 mm (189 in)- Package Dimension 315 mm x 545 mm x 585 mm (Wx Hx D)- Net Weight 74kg (154 lbs)- Gross Weight 90kg (198 lbs)- Warranty 5 Years











...

The Phanteks Enthoo Pro M Special Edition Midi-Tower in the Tempered Glass Edition is an expanded & visually optimised version of the Enthoo Pro M base model The variant now comes with a stylish side panel in tempered glass to allow an unimpeded view of the case&s interior In addition to the dust filters installed in the front roof & PSU shroud the case comes with two pre-installed 140 mm fans equipped with two Phanteks RGB fan frames & this can be supplemented with further fans or radiators (up to 360 mm) Furthermore the case supports motherboards up to E-ATX form factor & a maximum of eight 35" & five 25" data storage devices provided two 25" drives instead of two 35" drives are installed along with the optionally available brackets for maximum drive capacity IMPORTANT FEATURES OF THE PHANTEKS ENTHOO ENTHOO PRO M SPECIAL EDITION MIDI-TOWER Premium design with tinted tempered glass side-panels & premium materials luxurious interior in striking white Compatible with motherboards up to E-ATX form factor (max 264 cm wide) Three dust filters & two 140 mm fans pre-installed Two Phanteks Halos RGB fan frames for impressive lighting Side-mounted IO panel with RGB controls two USB (Universal Serial Bus) 30 ports & HD Audio ports Space for two 35" & three 25" storage devices (2x 25" instead of 35" expandable) Graphics cards up to 42 cm CPU cooler up to 194 cm & power supplies up to 318 cm TIMELESS & ELEGANT DESIGN WITH LARGE GLASS SIDE PANEL The removable front bracket offers a large black mesh acting as an air inlet & is just like the roof designed in a premium manner thanks to its black plastic which is styled to look like brushed aluminium In the upper front you can find a 525" slot concealed behind a panel on the side of the front are located the IO ports two USB (Universal Serial Bus) 30 ports as well as two audio ports & a reset button Even RGB lighting controls are present & accounted for The left side panel consisting of a huge pane of tinted glass also allows for an impressive view of the white frame of the case as well as the installed hardware With just a power button in front & several fan slots hidden behind the mesh the top section continues the seamless look In contrast to many other cases Phanteks has installed dust filters not only in the front & bottom of the Enthoo Pro M Special Edition as well The view from the window also reveals in addition to the many rubberised cable pass-throughs a dedicated chamber for the ATX power supply which pulls its fresh air from below without allowing warm air to escape to the rest of the parts in the tower Up to two 140- or three 120 mm fans or similarly proportioned radiators can be installed behind the front panel Only the installation of a 360 mm radiator requires the removal of the 525" drive age One 140 mm fan comes pre-installed in the front & one comes pre-installed in the rear & this one also comes kitted out with Phanteks Halos RGB fan frames The complement of fans can be increased further by two 140- or 120 mm fans Without the 525" cage three 120 mm fans would be compatible Alternatively a 280- or 360 mm radiator can be installed & this is installed by means of a side-mounted retractable bracket in the roof The installation of a radiator can be hindered due to installed RAM modules
- & this can also occasionally result in fans & the radiator being unable to be mounted in the middle but instead are shifted to the left where the greatest amount of space between the motherboard & the fanradiator is available As an alternative to the installation of fans it is also possible to install a 120- or 140 mm radiator in the rear Taken in combination this results in strong air intake heat removal as well as a superabundance of space for watercooling components The white metal cover for the PSU shroud something that greatly contributes to the appearance of a tidy interior also offers two mounting bays for 25" or 35" data storage devices Alternatively a vibration-dampening pump bracket can be mounted in this location Should this be installed in conjunction with a larger reservoir or a radiator be mounted behind the front panel a section of the horizontal divider can be removed something that expands the mounting possibilities for pumps & reservoirs even further There are also many options in regards to the installation of drives & watercooling There is also the option to install up to five further 35" or 25" drives directly behind the front
- the drive trays will be screwed into the motherboard tray On the reverse of the motherboard tray is a generous 3.5cm of space for tidy cable management Furthermore a 25" bracket with a " Drop-n-Lock" mechanism for a 25" drive is available with another one next to it & a final option located on the PSU shroud The optional PWM fan hub (LULS-239) can regulate up to eight 3-pin fans via a 3-pin PWM board connector Note Just a single 360 mm radiator can be installed either above in the roof or in the front Technical Details

Dimensions 235 x 480 x 500 mm (W x H x D) Weight approx 74kg Material Steel (body) tempered glass (side window) Plastic with brushed aluminium look (front) Colour Black white Form Factor E-ATX (up to 264 mm wide) ATX Micro-ATX Mini-ITX Total Possible Fans 2x 140 3x 120 mm (Front) 2x 140 3x 120 mm (Roof with 525" only 2x 140 120 mm) 1x 140 120 mm (Rear) Pre-Installed 1x 140 mm (Rear; PH-F140SP 1200 RPM 19 d B (A); with PH-FF140RGBP) 1x 140 mm (Front; PH-F140SP 1200 RPM 19 d B (A); with PH-FF140RGBP) Radiator Mountings (may partially block HDD- andor fan slots) 1x max 280360 mm (Front 360 mm only without 525" cage) 1x max 140120 mm (Rear) 1x max 280360 mm (Roof 360 mm only without 525" cage) Filter Front roof PSU (removable) Drive Bays 1x 525" (external bay removable) 2x 35" (internal; uncoupled; 6x optional via separately available HDD bracket GEPH-032) 3x 25" (internally; 2x instead of 35"; 1x via SSD bracket behind the motherboard tray with " Drop-n-Lock" 1x or 2x optional via in addition available SSD bracket GEPH-009 or GEPH-010) Power Supply 1x Standard ATX (optional) Expansion Slots 7 IO Panel 2x USB (Universal Serial Bus) 30 1x Audio In 1x Out RGB Control Maximum GPU Length 420 300 mm (without with HDD brackets) Maximum CPU Cooler Height 194 mm Maximum PSU Length 318 mm guarantee 5 Years



...

The ENTHOO PRO M focuses on delivering great design without compromising price Water-cooling builds will be a simple task with the help of our innovative radiator bracket & pump mounting locations Whether you are a system builder or water-cooling enthusiast the PRO M will give you unlimited possibilities Enthoo Pro M

Includes:: 1 x 140mm fan in the rear Ability to upgrade to additional fans is possible All fans included are Phanteks’ new redesigned & better performing SP series fans FEATURES- Brushed aluminum look- Clean interior
- Hidden PSU & HDD’s- Optimal airflow
- Direct airflow to CPU GPU- Comes with 1 Phanteks premium fan
- 1x PH-F140SP in rear (140mm)- 3 different installation areas for radiators (120mm or 140mm form factor)
- Reservoir mounting locations- 1x Drop-N-Lock SSD brackets included- Removable HDD cage for installation of long PSU’s (>180mm) waterpump- Equipped with removable dustfilters (1x front 1x bottom 1x top magnetic)- Clean cable management using Phanteks& preinstalled Hoop-N-Loop cable ties- Removable optical drive cage SPECIFICATIONS- Dimension 235 mm x 480 mm x 500 mm (W x H x D) 925 in x 189 in x 197 in- Colour Black- Form Factor Midtower Chassis- Material (s) Plastic Exterior Steel Chassis- Motherboard Support E-ATX (up to 264mm wide) ATX Micro ATX Mini ITX- Front IO 2x USB (Universal Serial Bus) 30 Mic Headphone Reset- Side Window Yes- Expansion slots 7- Internal 35" 8x (2x included)- Internal 25" (dedicated) 3x (1x included)- Cooling 120mm Fan
- Front 2x (3x without ODD Cage) Top 3x Rear 1x- Cooling 140mm Fan
- Front 2x Top 2x Rear 1x- Liquid Cooling 120mm Radiator
- Front Up to 360mm Top Up to 360mm Rear 120mm- Liquid Cooling 140mm Radiator
- Front Up to 280mm Top Up to 280mm Rear 140mm- Graphic card Clearance 420 mm (1654 in) No HDD brackets 300 mm (118 in) HDD brackets installed- PSU Clearance 318 mm (125 in)- CPU cooler Clearance 194 mm (76 in)- Cable management 3.5cm (138 in)- Memory clearance (motherboard
- fan) 120mm 68 mm (268 in) 140mm 48 mm (189 in)- Package Dimension 315 mm x 545 mm x 585 mm (Wx Hx D)- Net Weight 74kg (154 lbs)- Gross Weight 90kg (198 lbs)- Warranty 5 Years Case type Midi-Tower Form Factor E-ATX ATX Micro-ATX Mini-ITXSide panel Windowed Colour Black Main colour Black Accent colour Black Noise dampening No Width (exact) 235 Height (exact) 480 Depth (exact) 500 Width 200
- 300 mm Height 400
- 500 mm Depth 400
- 500 mm Material Plastic Steel Weight 6
- 8kg USB 2x USB 30 2x Audio output 1x Audio input 1x Internal 25" bays 4x Internal 35" bays 2x External 525" bays 1x PCI slots 7x Motherboard tray no Remote no Cable management yes Front LCDTFT display no Filter yes Power supply no Power supply format ATXPower supply position Rear Lower Fans pre-installed 1x 140mm 120mm Fan 7140mm Fan 5 Fan colour Black White Fan controller no Card reader no Front door no Hot-swap no Position IO Sideways HDD anti-vibration yes Radiator-mounting 1x Single (120mm) 1x Single (140mm) 2x Dual (280mm) 2x Triple (360mm) Lighting no














...