Combining performance & affordability the Kolink Observatory Lite Midi-Tower is a perfect mix of features & functionality With no less than 4 a RGB LED 12cm fans included as standard controlled with a supplied remote which allows a variety of modes lighting options & even speed control the Observatory Lite also provides a stylish tempered glass front panel with ample side ventilation The hardware you choose to install is also key; the tempered glass side panel means that you can create a showstopping system build All in all the Observatory Lite is an extremely strong chassis with plenty to offer THE FEATURES OF THE KOLINK OBSERVATORY LITE AT A GLANCETempered Glass front panel with 3 x pre-installed 12cm a RGB LED fans Tempered glass side panel for unobstructed view of the interior Designed for ATX-Micro-ATX-Mini-ITX motherboards RGB controller hub with remote control allowing various lighting modes &38; effects plus fan speed control Option to sync to motherboard software provided as standard Pre-installed rear 120mm fan with digitally addressable RGB lighting Support for radiators up to 280mm in the front IO Panel with 1x USB (Universal Serial Bus) 30 &38; 2x USB (Universal Serial Bus) 20 HD Audio RGB-LED controller PSU shroud with air inlets for a cleaner look Graphics cards up to 335 mm supported CPU coolers up to 160 mm PSUs up to 180 mm KOLINK OBSERVATORY LITE FORM & FUNCTION IN ABUNDANCEThe digitally addressable RGB-LED fans 4 of which are preinstalled are controlled by the supplied remote &38; RGB hub Alternatively the fans can be hooked up & controlled using a compatible motherboard thanks to its use of a standard 3-pin (5VDG) connector The tempered glass side panel allows users to enjoy a panoramic view of the lighting used inside the Kolink Observatory Lite Aside from the pre-installed fans users are also free to install two more 120mm fans in the roof This is where a magnetic dust filter can be found installed on the honeycomb-style mesh The side-facing air inlets on the front & in the PSU shroud also contribute to the excellent airflow of the case Users are also free to install a 280 mm radiator in the front THE KOLINK OBSERVATORY LITE HARDWARE FOCUSSEDThe interior comes entirely in black with a PSU shroud that only adds to the sleek & unobtrusive look Behind the shroud is where users will find space for a pair of 35&8243; HDD's in the HDD cage provided which also has anti-vibration mountings Alternatively 25&8243; SSD's can be installed here or next to the motherboard The motherboard tray & PSU shroud both offer numerous openings for optimum cable management with up to 30mm cable management space Underneath the case is a removable dust filter appropriate to an ATX-form factor PSU which can itself be up to 18 cm in length Graphics cards can be up to 335cm long (31cm if mounting an AIO) & CPU coolers up to 16 cm tall in addition the IO panel located at the front possesses two USB (Universal Serial Bus) 20 ports as well as an USB (Universal Serial Bus) 30 Type-A port SPECIFICATIONDimensions 190 x 440 x 400 mm (W x H x D) Box

Dimensions 258 x 498 x 440 mm (W x H x D) Material Steel tempered glass plastic Packaging EPE Foam Weight approx 55kg Colour Black Form factor ATX Micro-ATX Mini-ITXTotal fans possible 3x 120 mm 2 x 140mm (Front)2x 120 mm 140mm (Roof)1x 120 mm (Rear) Pre-installed 3x 120 mm (Front) a RGB LED1x 120 mm (rear) a RGB LEDRadiator Mountings 1x 280 mm (Front) Filter Roof bottom Drive bays 2x 3525 (internal)3x 25 (internal)PSU 1x Standard ATX (optional) Expansion slots 7IO-Panel 2x USB (Universal Serial Bus) 20 (internal connection)1x USB (Universal Serial Bus) 30 (internal connection)1x Audio In Out RGBReset Switch Max GPU length 335 mm (310mm if using AIO) Max CPU cooler height 160 mm Max PSU length 180 mm

...

Kolink is pleased to introduce the incredibly stylish Observatory Midi-Tower with its tempered glass front- & side panel through which users can see the total of four pre-installed RGB-LED fans in all their glory The lighting can be controlled via the bundled controller & remote The tidy interior of the Observatory offers lots of space for putting your hardware on show Pre-installed dust filters extensive space for water cooling & cable management these are just a few of the highlights offered by this Kolink case despite its diminutive size & price This case is almost entirely white except for the black elements & this helps it look extremely premium for the price THE FEATURES OF THE KOLINK OBSERVATORY AT A GLANCECase designed to support motherboards up to E-ATXFront & side panel in 4 mm thick tempered glass 4x 120 mm RGB fans including controller & remote IO Panel with 2x USB (Universal Serial Bus) 20 1x USB (Universal Serial Bus) 30 &38; HD Audio In Out Support for two radiators in 280 mm format 2x 35 & 4x 25 data storage devices Supports graphics cards up to 38 cm long &38; CPU coolers up to 16 cm high FRONT & SIDE PANEL IN TEMPERED GLASS &38; FOUR PRE-INSTALLED RGB FANSThe robust chassis is made from millimetre thick SECC steel & comes with a front & side panel in four millimetre thick glass The entire interior is likewise coated in white & equipped with a shroud for the power supply in order to maintain an incredibly clean aesthetic A hard drive cage is attached here with brackets for two 35 drives as well as space for the power supply Four more 25 drives can be placed next to the motherboard The visual highlight of the case is formed by the three 120 mm RGB fans pre-installed in the front & an additional fan in the rear The fans possess 16 individually addressable RGB-LEDs Their lighting can be controlled via infrared remote control using the bundled RGB controller & fan hub that can be placed in a location of your choosing This enables 300 dynamic lighting effects to be configured Two further 120 mm or 140 mm fans can be mounted in the roof The three 120 mm fans at the front can be exchanged for two 140 mm fans DUST FILTERS KEEP THE KOLINK OBSERVATORY CLEANThe motherboard tray & the PSU shroud offer multiple openings for cables A 240 mm or 280 mm radiator can be installed in the front & on the roof of the Kolink case With air inlets are equipped with fine dust filters located in the roof & on the bottom of the case They are easily removed without requiring tools & strengthened with a filigree honeycomb design GPUs can be up to 38 cm long & CPU coolers may be up to 16 cm high in addition the IO panel located on the front offers two USB (Universal Serial Bus) 20 connections as well as a USB (Universal Serial Bus) 30 Type-A port A cut-out is present for a USB (Universal Serial Bus) Type-C connection however this does not come as standard with the case & must be added later The same is true of a switch used for controlling the IO panel's RGB lighting Technical Details Dimensions 210 x 435 x 435 mm (W x H x D with standups) Dimensions 210 x 453 x 435 mm (W x H x D without standups) Material Steel tempered glass Weight approx 68kg Colour White (case) Black (mesh elements) Form Factor E-ATX (up to 279 mm wide) ATX Micro-ATX Mini-ITXTotal Possible Fans 3x 120 mm 2x 140 mm (Front)2x 120 mm 140 mm (Top)1x 120 mm (Rear) Pre-Installed 3x 120 mm RGB (Front)1x 120 mm RGB (Rear) Radiator Mountings 1x 240 mm 280 mm (Front)1x 240 mm 280 mm (Roof) Filter Roof underside Drive Bays 4x 25 (internal)2x 35 (internal) Power Supply 1x Standard ATX up to 200 mm (optional) Expansion Slots 7IO Panel 2x USB (Universal Serial Bus) 20 (internal connection)1x USB (Universal Serial Bus) 30 (internal connection)1x Audio In Out Maximum GPU Length 380 mm Maximum CPU Cooler Height 160 mm ...

With their premium & yet affordable gaming cases Kolink has firmly established themselves as a leader in the world of respected case manufacturers The Outline represents an impressive addition to their category of high-performance cases one that manages to offer as much in terms of design as it does in functionality The spacious interior fits up to a high-end SSI-EEB motherboard & graphics cards up to 360 mm in length The cards can also be installed vertically providing they are dual slot width using the supplied mount & a PCI-E riser cable (sold separately) It goes without saying that the case offers plenty of room for all your cooling needs the front supports a radiator up to 360 mm & the roof supports a 240 mm radiator What really stands out however is the design of its front panel on the left are functional but attractive air inlets in a checkerboard pattern on the right is a digitally addressable RGB-LED strip in the form of a narrow rectangle A pre-installed high-performance 120 mm ARGB fan illuminates the interior of this deceptively large Midi-Tower meaning that excellent cooling is a given A tempered glass side panel allows users to enjoy an unobstructed view of the installed hardware THE FEATURES OF THE KOLINK OUTLINE MIDI-TOWER AT A GLANCEStylish Midi-Tower for motherboards up to SSI-EEB format Tempered glass side panel for a clear view of the interior Digitally addressable RGB-LED strip on the front Option of vertically mounting a dual slot GPURadiator up to 360 mm on the front up to 240 mm on the roof A pre-installed 120mm fan on the back with digitally addressable RGB-LEDs Up to six 120 mm fans supported Space for graphics cards up to 360 mm CPU coolers up to 162 mm IO Panel with controller for RGB-LEDs 1x USB (Universal Serial Bus) 30 2x USB (Universal Serial Bus) 20 & HD Audio PLENTY OF SPACE FOR GAMING HARDWARE IN THE KOLINK OUTLINEEven if the outside of the case corresponds to the

Dimensions of a Midi-Tower the Kolink Outline manages to provide support for motherboards up to the SSI-EEB format Even graphics cards up to 360 mm will fit thanks to the amount of room available behind the front panel Even large CPU coolers up to 162 mm in height will fit with ease A shroud helpfully conceals the power supply & the HDD cage in which users can either install two 35- or two 25 drives The rear of the motherboard allows for two 25 SSDs to be installed Those preferring to opt for air cooling will appreciate the number of mounting points present for 120 mm fans The roof supports two 120 mm fans It is also equipped with a handy mesh which allows air to flow through the case without excess dust thanks to the presence of a dust filter The result is that this is a large attractive yet low-maintenance case If that's still not enough cooling the front supports up to three 120 mm fans The slot at the rear is occupied by a 120 mm fan The pre-installed fan is equipped with digitally addressable RGB-LED lighting Of course users are free to install radiators instead of fans if needed with a 240 mm radiator in the roof & a 360 mm at the front TEMPERED GLASS & RGB-LEDS TO PUT YOUR HARDWARE ON SHOWThe power supply cover provides a tidy look inside the case Well-placed feedthroughs & cable guides allow for sophisticated cable management The eye-catching strip on the front of the case is equipped with digitally addressable RGB LEDs the lighting of which can be controlled via a switch on the IO panel or the strip can be connected directly to a motherboard & controlled directly via the board instead The lighting on the pre-installed fan is also done via a compatible 3-pin connector (5VDG) which can also be controlled via the controller on the IO panel or via the motherboard The RGB switch on the IO panel can also double up as a reset button In addition to the RGBReset switch there are one USB (Universal Serial Bus) 30 & two USB (Universal Serial Bus) 20 slots as well as 35 millimetre sockets for headphones & microphone a power LED & an HDD LEDTechnical details Dimensions (H x W x D) 415 x 210 x 440 mm Material Steel tempered glass plastic Weight approx 59kg Colour Black Form Factor SSI-EEB E-ATX ATX Micro-ATX Mini-ITXFan possible in total 2x 120 mm (cover)3x 120 mm (front side)1x 120 mm (rear) Pre-installed 1x 120 mm Rear side Radiator mountings 1x 240 mm (cover)1x 360 mm (front side)1x 120 mm (rear) Filter cover underside Drive bays 2x 3525 inch (internal HDD cage) Power supply 1x standard ATX (optional) Extension slots 72IO Panel 2x USB (Universal Serial Bus) 20 (internal connection)1x USB (Universal Serial Bus) 30 (internal connection)1x per Audio In Out 1x RGBReset switch Maximum graphics card length 360 mm Vertical GPU Support Dual Slot up to 360mm PCI-E Riser cable sold separately Maximum CPU cooler height 162 mm Maximum power supply length 180 mm

...

This PCI Express x 1 to x 16 powered riser card with an additional Molex power connector is the ideal accessory for Bitcoin Mining systems & of course taking into account the available bandwidth Can also be used like any other riser card for other systems & applications such as Altcoin Ethereum Ether Zcash Distributed Computing Rendering & Boinc Bitcoin is a virtual pay-as-you-go virtual payment tool launched & managed by all the participating Bitcoin network clients Like many other cryptos with proof-of-work principle bitcoins are caused by computer Cryptographic computing tasks with a high energy expenditure which is called "mining" (mining) In principle normal computer processors (CPUs) are capable of calculating new bitcoins but they can only calculate a few (kilo) hashes per second & therefore are not suited to bitcoin mines in relation to the time & energy used for this purpose Regarding the efficiency they are clearly beaten by graphics processors (GPUs) especially graphics chips of the Radeon series from AMD have proved particularly strong Mining rigs are referred to as PC-systems from commercially available hardware components the only task of which is to calculate Bitcoins by means of several graphics cards in continuous operation In order to counter the resulting high heat development & to operate as many graphics cards as possible in parallel these GPU-Miner systems usually use very open housings (comparable to Benchtables) or in some cases adventurous self-assembled case circuits As with AMD Cross Fire or NVIDIA SLI gaming PCs not all PCI Express slots can be used on a system-based motherboard since high-performance graphics cards generally have a wide dual fan or even three-fan fan & thus the space required for further GPUs is missing or must be moved with many Mining PCs all PCIe slots due to the respective graphics card constellation This is where the practical powered Riser Card comes in & allows the installation of PCI Express slots with x 1 x 4 x 8 or x 16 connectivity on the motherboard by allowing an additional PCI Express x 16 slot to be strategic In or outside the housing This x 16 slot is electrically connected to a single PCI Express lane which corresponds to the PCIe generation of the output slot Since bitcoin mining is only performed by the GPU & in contrast to video games no textures or shader data have to be transported into the graphics memory the bandwidth available for this application is sufficient For data transfer the riser card is a USB (Universal Serial Bus) 30 cable With a length of Approx. 600 millimeters allows a lot of room for the PCIe slot In contrast to the often used IDE flat-ribbon cables with conventional riser cards the module can be installed better & there are further advantages in the higher stability as well as the less hindrance of the airflow A SATA-to-Molex power cable which is also included transmits up to 75 watts of electrical power directly from the power supply which is normally delivered directly from the PCIe slot while the additional energy of the graphics card comes directly from the power supply via additional PCIe plugs With this powered riser it is thus possible to operate up to 6 graphics cards on a mainboard without overloading its voltage supply 600 millimeters allows a lot of room for the installation of the PCIe slot In contrast to the often used IDE flat-ribbon cables with conventional riser cards the module can be installed better & there are further advantages in the higher stability as well as the less hindrance of the airflow A SATA-to-Molex power cable which is also included transmits up to 75 watts of electrical power directly from the power supply which is normally delivered directly from the PCIe slot while the additional energy of the graphics card comes as usual via additional PCIe plugs directly from the power supply With this powered riser it is thus possible to operate up to 6 graphics cards on a mainboard without overloading its voltage supply In contrast to the often used IDE flat-ribbon cables with conventional riser cards the module can be installed better & there are further advantages in the higher stability as well as the less hindrance of the airflow A SATA-to-Molex power cable which is also included transmits up to 75 watts of electrical power directly from the power supply which is normally delivered directly from the PCIe slot while the additional energy of the graphics card comes as usual via additional PCIe plugs directly from the power supply With this powered riser it is thus possible to operate up to 6 graphics cards on a mainboard without overloading its voltage supply A SATA-to-Molex power cable which is also included transmits up to 75 watts of electrical power directly from the power supply which is normally delivered directly from the PCIe slot while the additional energy of the graphics card comes directly from the power supply via additional PCIe plugs With this powered riser it is thus possible to operate up to 6 graphics cards on a mainboard without overloading its voltage supply Up to 6 graphics cards on a mainboard without overloading the power supply Cable length approx 60 cm Connections Plug-in module PCIe with 1 lane socket module PCIe with 16 lanes (electrical connection x 1) Power supply 1x 4-pin Molex socket Supplied cables 1x USB (Universal Serial Bus) 30 1x SATA to Molex adapter cable Supported PCI Express standards 1x 2x 30 ...

This PCI-Express x 1 to x 16 powered riser card with additional 6-pin PCIe power connector is the ideal accessory for bitcoin mining systems & can of course be used in accordance with the requirements set out here As well as any other riser card for other systems & application areas such as Altcoin Ethereum Ether Zcash Distributed Computing Rendering & Boinc Bitcoin is a virtual pay-as-you-go virtual payment tool launched & managed by all the participating Bitcoin network clients Like many other cryptos with proof-of-work principle bitcoins are caused by computer- Cryptographic computing tasks with a high energy expenditure which is called "mining" (mining) In principle normal computer processors (CPUs) are capable of calculating new bitcoins but they can only calculate a few (kilo) hashes per second & therefore are not suited to bitcoin mines in relation to the time & energy used for this purpose Regarding the efficiency they are clearly beaten by graphics processors (GPUs) especially graphics chips of the Radeon series from AMD have proved particularly strong Mining rigs are referred to as PC-systems from commercially available hardware components the only task of which is to calculate Bitcoins by means of several graphics cards in continuous operation In order to counter the resulting high heat development & to operate as many graphics cards as possible in parallel these GPU-Miner systems usually use very open housings (comparable to Benchtables) or in some cases adventurous self-assembled case circuits As with AMD Cross Fire or NVIDIA SLI gaming PCs not all PCI Express slots can be used on a system-based motherboard since high-performance graphics cards generally have a wide dual fan or even three-fan fan & thus the space required for further GPUs is missing or must be moved with many Mining PCs all PCIe slots due to the respective graphics card constellation This is where the practical powered Riser Card comes in & allows the installation of PCI Express slots with x 1 x 4 x 8 or x 16 connectivity on the motherboard by allowing an additional PCI Express x 16 slot to be strategic In or outside the housing This x 16 slot is electrically connected to a single PCI Express lane which corresponds to the PCIe generation of the output slot Since bitcoin mining is only performed by the GPU & in contrast to video games no textures or shader data have to be transported into the graphics memory the bandwidth available for this application is sufficient For data transfer the riser card is a USB (Universal Serial Bus) 30 cable With a length of Approx. 800 millimeters allows a great deal of room for the installation of the PCIe slot In contrast to the often used IDE flat-ribbon cables with conventional riser cards the module can be installed better & there are further advantages in the higher stability as well as the less hindrance of the airflow The power supply to the board is provided by a 6-pin PCI Express connector directly from the power supply which is capable of providing up to 75 watts of electrical power normally supplied by the motherboard&s PCIe slot Compared to Molex plugs & adapters this type of power supply ensures a lower transition resistance & is therefore particularly stable & extremely reliable The remaining energy required by the graphics card comes as usual from other PCIe connectors directly connected to the GPU With this powered riser it is thus possible to operate up to 6 graphics cards on a mainboard without overloading the power supply or the cables of the power supply Technical details Cable length approx 80 cm Connections Plug-in module PCIe with 1 lanesocket module PCIe with 16 lanes (electrical connection x 1) Power supply 1x 6-pin PCI Express socket Supplied cables 1x USB (Universal Serial Bus) 30 Supported PCI Express standards 1x 2x 30 ...

This riser cable from the case design specialists at Kolink allows the PCI Express x 16 slot on a motherboard to be connected to a graphics card installed vertically within a case The Kolink PCI Express 30 x 16 on x 16 riser cable is Approx. 300 mm long It is suitable for use in cases from all manufacturers due to its high quality design Technical Details Length 300 mm Color Black Connections Plug PCIe with 16 Lanes Socket PCIe with 16 Lanes Supported PCI Express standards 1x 2x 30 ...

The Kolink PCI-E x 1 to Quad x 16
- Quad-Mining Rendering Upgrade Adapteris the ideal accessory to build or extend a mining rig
...

Although a relatively recent entrant to the market Kolink has gone from strength to strength in making a name for themselves in the world of innovative & high-performance cases As such allow Kolink to introduce the new Quantum Midi-Tower! This is a feature-rich case that is perfect for gamers & behind its attractive exterior lies a remarkable amount of space for powerful gaming hardware In fact even large E-ATX form factor motherboards will fit meaning that even the ultimate no-compromises gaming PC will fit with space to spare Needless to say all this will be on show via the tempered glass side panel with the unsightly elements such as cables being cleverly concealed behind a power supply shroud The front of the case is distinguished by the presence of a diagonal mesh cut-out which ensure a consistent supply of fresh air & optimal airflow to all your components What makes this a little special however is that it also comes with an inbuilt digitally addressable RGB-LED strip along with a pre-installed 120mm fan which likewise has its own d RGB-LEDs Attractive looks & effective airflow this case has it all Want to go into stealth mode? There's a handy switch directly available on the IO panel for that Alternatively the strip & the fan can also be hooked up directly to the motherboard & controlled that way instead For additional cooling users will be pleased to note the presence of a honeycomb-style mesh with its own integrated dust filter in the roof THE FEATURES OF THE KOLINK QUANTUM MIDI-TOWER AT A GLANCEStylish Midi-Tower for motherboards up to E-ATX format Tempered glass side panel Front with diagonal mesh cut-out Vibrant d RGB lighting on the front One pre-installed 120mm fan with digitally addressable RGB-LEDs at the rear Up to five 120mm- & four 140mm fans compatible Supports graphics cards up to 340mm long CPU coolers 155mm tall IO Panel with controller for RGB-LEDs 1x USB (Universal Serial Bus) 30 & 2x USB (Universal Serial Bus) 20KOLINK QUANTUM THE SPACE YOU NEEDEven though the outer

Dimensions meet the specs of a Midi-Tower the Quantum offers a specially designed layout that allows motherboards up to E-ATX format to fit comfortably Even 340mm long graphics cards that stretch out to the front of the case will fit CPU coolers aren't a problem either given the presence of 155mm of vertical clearance which is more than enough for all but the most exotic of coolers A smart shroud is present that helps cover up the power supply & the HDD cage in which users have the choice of installing either two 35- or two 25 drives The rear of the motherboard conceals some handy brackets that allow the installation of another two 25 SSDs should you require A subtle curve on the right side of the case enables users to benefit from the extra cable storage space despite the case as a whole remaining unobtrusive For the fans of traditional air cooling out there we've got you covered there's more than enough slots for 120mm fans in fact the mesh cut-out front of the case & the side-facing air inlets supply air to potentially two 120mm- or two 140mm fans The roof allows for either two 120mm- or two 140mm fans to be installed as needed Equipped with a honeycomb mesh in the roof the case has perfectly optimised to keep the central component cool as well as dust free over time Conveniently Kolink also thought to include a magnetic dust filter for convenient cleaning The added benefit of this of course is the fact that the interior won't need constant cleaning One 120mm fan with d RGB LEDs comes installed at the back of the case Want to water cool? No problem just install up to a 280mm radiator in the front of the case while the rear-mounted fan can simply be replaced by a 120mm radiator if you prefer TEMPERED GLASS & RGB-LEDS GET YOUR HARDWARE LOOKING GOODThe clever combination of cable guides & ties mean that users are going to love the layout of their new system in the Quantum The spacious interior complete with your gaming gear can all be admired through the tempered glass side panel The diagonal mesh cut-out with dust filter is illuminated with digitally addressable RGB-LEDs control of which is possible thanks to the presence of the switch on the IO panel which also allows handy access to switching between light effects & this also holds true for the lighting on the rear-mounted fan Alternatively the RGB lighting of the strip & the fan can be controlled by hooking it up to your motherboard directly This then allows the RGB switch on the IO panel to be used as a reset button Aside from the RGBReset switch there's also a handy USB (Universal Serial Bus) 30 port & two USB (Universal Serial Bus) 20 ports along with the standard 35mm jacks for headphones & microphones not to mention power- & HDD-LEDs Technical Details Dimensions (H x B x D) 443 x 191 x 467 mm Material Steel tempered glass plastic Weight approx 57kg Colour Black Form factor E-ATX ATX Micro-ATX Mini-ITXTotal fans possible 2x 120140 mm (roof)2x 120140 mm (front)1x 120 mm (rear) Pre-installed 1x 120 mm rear Radiator Mountings 1x 280240 mm (front)1x 120 mm (rear) Filter Roof bottom front Drive Bays 2x 3525 (internal HDD cage)2x 25 (internal motherboard tray)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x USB (Universal Serial Bus) 30 Type A (internal connection)2x USB (Universal Serial Bus) 20 (internal connection)1x Audio In Out 1x RGB-Reset Switch Max GPU length 340 mm Max CPU cooler height 155 mm Max PSU depth 200 mm

...

Renowned for their innovative & high-performance cases Kolink has now brought the new Refine Midi-Tower to market representing a feature-rich gaming case that offers an abundance of space beneath its stylish exterior for all the powerful gaming hardware you could want The tempered glass side door will allow users to enjoy an unobstructed view of their high-end gaming setup complete with compatibility for E-ATX motherboards Given the use of tempered glass aesthetics are important & a PSU shroud cleverly conceals unsightly cables The front of the case that consists of brushed aluminium underlines the chic appearance that is also accentuated by the addition of a digitally addressable RGB-LED strip The lighting can be controlled via a switch on the IO panel Alternatively the strip can also be connected directly to a motherboard & controlled by applicable software A fine mesh with integrated dust filter on the top ensures proper ventilation A pre-installed 120mm fan at the rear provides adequate ventilation THE FEATURES OF THE KOLINK REFINE MIDI-TOWER AT A GLANCEStylish Midi-Tower supporting up to E-ATX motherboards Tempered glass side panel with hinges Brushed aluminium front Smart digitally addressable RGB lighting on the front One pre-installed 120mm fan on the rear Up to five 120mm- & four 140mm fans possible Space for graphics cards up to 380mm CPU coolers up to 160mm tall IO Panel with controller for RGB-LEDs 1x USB (Universal Serial Bus) 31 Type C 1x USB (Universal Serial Bus) 30 & 2x USB (Universal Serial Bus) 20KOLINK REFINE PLENTY OF SPACE FOR POWERFUL GAMING HARDWAREEven though the case's

Dimensions correspond to those of a Midi-Tower the Refine utilises its ingenious design to enable support for E-ATX motherboards Even graphics cards measuring up to 380 mm will enjoy plenty of space towards the front of the case CPU coolers measuring up to 160mm in height will also fit with space to spare The implementation of a smart shroud helps conceal the PSU & HDD cage in which users are free to install two 35- or two 25 drives To the rear of the motherboard lies a bracket offering support for two more 25 SSDs Those who prefer to opt for air cooling will be pleased to know that there are plenty of mounting points for 120mm fans The front allows for the installation of two 120mm- or two 140mm fans The roof allows for either two 120mm- or two 140mm fans The roof of the case is equipped with a mesh that helps ensure maximum airflow with a minimum of unwanted dust This is also possible in no small part thanks to the smart use of dust filters meaning that the case's interior will rarely need special cleaning A single 120mm occupies a slot at the back of the case The front of the case supports a 280mm radiator & of course the rear fan can be replaced with a 120mm radiator if you prefer TEMPERED GLASS & RGB-LEDS GET YOUR HARDWARE LOOKING GREATThanks to Kolink's clever choice of locations for the case's cable guides & brackets users can look forward to a strikingly smart & clean-looking case The spacious interior can be admired from the outside thanks to the case's use of a tempered glass side door which of course uses hinges to make opening & closing the case a breeze A strip of digitally addressable RGB-LEDs is attached to the side of the brushed aluminium front A switch on the IO panel is responsible for controlling them along with their accompanying lighting effects Alternatively the strip can also be connected & controlled directly to the mainboard Then the RGB switch on the IO panel can also be used as a reset button In addition to the RGBReset switch there is also a USB (Universal Serial Bus) 31 Type C slot a USB (Universal Serial Bus) 30 slot & two USB (Universal Serial Bus) 20 ports as well as 3.5cm sockets for headphones & microphone & finally a power & HDD-LED Technical Details Dimensions (H x B x D) 435 x 205 x 455 mm Material Steel tempered glass aluminium plastic Weight approx 59kg Colour Gunmetal Grey Form factor E-ATX ATX Micro-ATX Mini-ITXTotal possible fans 2x 120140 mm (roof)2x 120140 mm (front)1x 120 mm (rear) Pre-installed 1x 120 mm rear Radiator Mountings 1x 240280 mm (front)1x 120 mm (rear) Filter Roof bottom Drive bays 2x 3525 (internal HDD cage)2x 25 (internal motherboard tray)PSU 1x Standard ATX (optional) Expansion slots 7IO Panel 1x USB (Universal Serial Bus) 31 Type C (internal connection)1x USB (Universal Serial Bus) 30 Type A (internal connection)2x USB (Universal Serial Bus) 20 (internal connection)1x Audio In Out 1x RGB-Reset Switches Max GPU length 380 mm Max CPU cooler height 160 mm Max PSU depth 200 mm

...

The Kolink Satellite is a cube style chassis with impressive amounts of component support including up to 280mm VGA ATX PSU up to 220mm (140mm with VGA card over 190mm) & even Micro-ATX boards up to 226cm x 18cm The front IO is equipped with 2 x USB30 ports for high speed transfers & there is internal space for various drive configurations to suit your requirements The Kolink Satellite aims to offer impressive functionality with a small case footprint & competitive price It delivers on all counts FEATURES- 2 x USB30 on the front panel- Support for Micro-ATX Motherboards (Up to 226cm x 18cm)- Support for 280mm VGA cards- Small footprint- Space for 2 x 35 2 x 25 or 3 x 35 or 4 x 25 HDD's- Black Interior with 12cm rear fan installed SPECIFICATIONS- Model Satellite- Type Micro-ATX Cube Case- Colour Black- Case Material 05mm Steel Plastic- Power Supply Orientation Front- Motherboard Support Micro-ATX (Up to 226cm x 18cm) Mini-ITX- External 525 Bays- External 35 Bays 0- Internal 35 Bays 3 (dependant on configuration)- Internal 25 Bays 4 (dependant on configuration)- Expansion Slots 2- Front Ports 2 x USB30 (with USB20 convertor) HD-Audio x 1 Mic x 1- Cooling System Rear
- 1 x 120mm (included)-

Dimensions 260 x 190 x 328mm- Clearance VGA
- 280mm CPU Cooler 165mm PSU
- 220mm (with VGA card under 190mm) 140mm (with VGA card over 190mm)




...