The Kolink KL series are 80 Plus Bronze certified power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-400 is able to deliver 400w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTP The KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 1 x (400W) or 2 x (500W600W) PCI-E 6 2 pin connectors for GPU support The Kolink KL series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind SPECIFICATIONS- Power supply 200V
- 240V 50-60 Hz- Wattage 400W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Silent 12cm fan cooling- High performance components for enhanced reliability- Eco-friendly design to meet Elot 3- Support PCI express
- 1 x (400W) & 2 x (500W600W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 150mm (W) x 150mm (D)- CERo HS approved CONNECTORS- 1 x 20 4-Pin ATX12VEPS12V- 1 x 4 4-Pin ATX12VEPS12V- 1 x 6 2-Pin-PCIe- 3 x SATA- 2 x 4-Pin-Molex- 1 x FDD- Warranty 2yr



...

The Kolink KL series are 80 Plus Bronze certified power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-500 is able to deliver 500w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTPThe KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 1 x (400W) or 2 x (500W600W) PCI-E 6 2 pin connectors for GPU support The Kolink KL series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind SPECIFICATIONS- Power supply 200V
- 240V 50-60 Hz- Wattage 500W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Silent 12cm fan cooling- High performance components for enhanced reliability- Eco-friendly design to meet Elot 3- Support PCI express
- 1 x (400W) & 2 x (500W600W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 150mm (W) x 150mm (D)- CERo HS approved CONNECTORS- 1 x 20 4-Pin ATX12VEPS12V- 1 x 4 4-Pin ATX12VEPS12V- 2 x 6 2-Pin-PCIe- 4 x SATA- 3 x 4-Pin-Molex- 1 x FDD- Warranty 2yr



...

The Kolink KL Modular series are 80 Plus Bronze certified semi modular power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-500M features semi-modular funcitionality with sleeved cables & is able to deliver 500w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTP The KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 2 x (500W600W) or 4 (700W) PCI-E 6 2 pin connectors for GPU support The Kolink KL Modular series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind
- Power supply 200V
- 240V 50-60 Hz- Wattage 500W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Semi Modular operation with fixed 20 4 Pin & 4 4 Pin connectors- Silent 12cm fan cooling (automatic control)- High performance components for enhanced reliability- Sleeved Cables for both fixed & modular cables- Eco-friendly design to meet Elot 3- Support PCI express
- 2 x (500W600W) & 4 x (700W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 140mm (W) x 150mm (D)- CERo HS approved CONNECTORS- 1 x 20 4-Pin ATX12VEPS12V (Fixed)- 1 x 4 4-Pin ATX12VEPS12V (Fixed)- 2 x 6 2-Pin-PCIe- 4 x SATA- 3 x 4-Pin-Molex- 1 x FDD- Warranty 2yr




...

The Kolink KL Modular series are 80 Plus Bronze certified semi modular power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-600M features semi-modular funcitionality with sleeved cables & is able to deliver 500w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTP The KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 2 x (500W600W) or 4 (700W) PCI-E 6 2 pin connectors for GPU support The Kolink KL Modular series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind SPECIFICATIONS- Power supply 200V
- 240V 50-60 Hz- Wattage 600W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Semi Modular operation with fixed 20 4 Pin & 4 4 Pin connectors- Silent 12cm fan cooling (automatic control)- High performance components for enhanced reliability- Sleeved Cables for both fixed & modular cables- Eco-friendly design to meet Elot 3- Support PCI express
- 2 x (500W600W) & 4 x (700W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 140mm (W) x 150mm (D)- CERo HS approved CONNECTORS- 1 x 20 4-Pin ATX12VEPS12V (Fixed)- 1 x 4 4-Pin ATX12VEPS12V (Fixed)- 2 x 6 2-Pin-PCIe- 4 x SATA- 3 x 4-Pin-Molex- 1 x FDD- Warranty 2yr



...

The Kolink KL series are 80 Plus Bronze certified power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-600 is able to deliver 600w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTP The KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 1 x (400W) 2 x (500W600W) or 4 x (700W) PCI-E 6 2 pin connectors for GPU support The Kolink KL series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind SPECIFICATIONS- Power supply 200V
- 240V 50-60 Hz- Wattage 700W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Silent 12cm fan cooling- High performance components for enhanced reliability- Eco-friendly design to meet Elot 3- Support PCI express
- 1 x (400W) 2 x (500W600W) & 4 (700W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 150mm (W) x 150mm (D)- CERo HS approved



...

The partly modular KL-M series has been designed with low budget & system integration in mind Four models cover the power range from 500 to 850 watts & have the official 80 Plus bronze certification The cooling of the electronics is ensured by a large 120-millimeter fan The top model offered here delivers a maximum power of 850 watts & uses top-class technology while a double-forward circuit is used in the primary range the manufacturer uses DC-DC technology with independent voltage segregation in the secondary range Both the efficiency & the precision of the power supply benefit especially in the case of asymmetrical loads This 850 watt PSU of the budget series has sufficient connections & power for fast computers The electronics supply up to 744 watts continuously on the 12 volt line on the rails with 33 & 5 volt additional 100 watts are provided In addition to the 20 4-pin for the mainboard the Kolink KL-850M has a 4 4-pin connector for powering the processor & four 6 2-pin connectors for up to two fast dedicated graphics cards Six SATA & three Molex connectors are available for the other components The 20 4-pin & 4 4-pin connector as well as two 6 2-pin connectors are permanently connected to the power supply The remaining cables can be connected as required The Kolink KL-850M is thus one of the most affordable options for power supply with partial modular cable management Features Part-modular cable management with a total of four 6 2-pin connectors 80 Plus bronze certificate for high efficiency DC-DC voltage conversion for stable operation Extremely strong 62 amperes on the 12 volt line High compatibility with ATX form factor Specification Efficiency at least 858282 percent at 5020100 percent load 80 Plus Bronze certified PFC Active (09) Form Factor ATX12V 23 Power 850W (33V 20A 5V 20A 33V 5V 100W 12V 744W 62A-12V 03A (36W) 5 Vsb 2 5 A (125 W) ) Fan 120 mm (automatic control) Dimensions 150 x 86 x 160 mm (W x H x D) Connections (fixed) 1x 20 4-pin 1x 4 4-pin 2x 6 2-pin PCIe Connectors (detachable) 2x 6 2-pin PCIe 6x SATA 3x 4-pin Molex ...

Kolink are happy to introduce a range of SFX power supplies into their range These are in 250W 350W & 450W varieties & each unit is capable of reaching 80 Bronze 80 Plus 230V EU levels of efficiency
- 85 at 50 82 at 20100 Each unit meets Er P Lot 2013 with < 05W consumed on standby Each Kolink SFX power supply uses a single 12V rail for providing the most stable amount of power where it&s needed The supplied 80mm fan is profiled for quiet usage at all loads Furthermore all Kolink SFX power supplies are supplied with a 3 year warranty as standard for peace of mind Enjoy reliable yet competitively priced power in your SFX system with Kolink SFX Power Supplies! CONNECTORS 1 x 20 4-Pin ATX12VEPS12V 1 x 4-Pin ATX12V 2 x SATA 2 x 4-Pin-Molexá Warranty 3yr
...

nonl 2br Kolink are happy to introduce a range of SFX power supplies into their range These are in 250W 350W & 450W varieties & each unit is capable of reaching 80 Bronze 80 Plus 230V EU levels of efficiency
- 85 at 50 82 at 20100 Each unit meets Er P Lot 2013 with < 05W consumed on standby Each Kolink SFX power supply uses a single 12V rail for providing the most stable amount of power where it&s needed The supplied 80mm fan is profiled for quiet usage at all loads Furthermore all Kolink SFX power supplies are supplied with a 3 year warranty as standard for peace of mind Enjoy reliable yet competitively priced power in your SFX system with Kolink SFX Power Supplies! Specifications-

Dimensions 125 x 63 x 100 mm (W x H x D)- Fan 80 mm (thermal controlled)- Efficiency min 828582 2050100 load (230 volts)
- Active PFC (09)- Form factor SFXConnectors- 1 x 20 4-Pin ATX12VEPS12V- 1 x 4 4-Pin ATX12VEPS12V- 1 x 6 2-Pin-PCIe- 2 x SATA- 2 x 4-Pin-Molex- Manufacturer Warranty 3yr



...

Kolink are happy to introduce a range of SFX power supplies into their range These are in 250W 350W & 450W varieties & each unit is capable of reaching 80 Bronze 80 Plus 230V EU levels of efficiency
- 85 at 50 82 at 20100 Each unit meets Er P Lot 2013 with < 05W consumed on standby Each Kolink SFX power supply uses a single 12V rail for providing the most stable amount of power where it&s needed The supplied 80mm fan is profiled for quiet usage at all loads Furthermore all Kolink SFX power supplies are supplied with a 3 year warranty as standard for peace of mind Enjoy reliable yet competitively priced power in your SFX system with Kolink SFX Power Supplies! Specifications-

Dimensions 125 x 63 x 100 mm (W x H x D)- Fan 80 mm (thermal controlled)- Efficiency min 828582 2050100 load (230 volts)
- Active PFC (09)- Form factor SFXConnectors- 1 x 20 4-Pin ATX12VEPS12V- 1 x 4 4-Pin ATX12VEPS12V- 2 x 6 2-Pin-PCIe- 4 x SATA- 2 x 4-Pin-Molex- Warranty 3yr



...

Kolink is steadily becoming renowned for their ability to create quality cases at very competitive prices Now they have released the extremely stylish KLA-002 Midi-Tower In terms of functionality the case offers something that has almost become a rarity these days an externally accessible 525 drive bay The front is manufactured from premium quality plastic with the look of brushed aluminium The tidy & well-designed interior of the KLA-002 offers plenty of space for hardware as well as watercooling
- & the cable management options only add to the premium feel of the case as a whole Despite focusing on value for your money Kolink's refusal to compromise on quality makes their cases an excellent choice for gamers THE FEATURES OF THE KOLINK KLA-002 AT A GLANCEDesigner case for motherboards up to ATX form factor 1x Pre-installed 80 mm fan in the back IO Panel with 2x USB (Universal Serial Bus) 20 1x USB (Universal Serial Bus) 30 &38; HD Audio In Out Supports a 240 mm radiator 3x 35 & 2x 25 drive slots Supports graphics cards up to 35 cm long &38; CPU coolers up to 15 cm in height PLENTY OF SPACE FOR HARDWARE & TWO 525 DRIVE BAYSThe robust chassis is made from one millimetre-thick SECC steel & has a stylish plastic front section that takes after brushed aluminium in its appearance The power supply would be placed at the top of the case towards the rear while also offering space for up to two hard drives in front beneath the HDD cage An additional HDD can be installed onto the reverse side of the motherboard tray Alternatively should you prefer two 25 SDDs be installed The case also reserves plenty of space for cable management 525 drives have become somewhat of a rarity in recent years but the KLA-002 offers space for them This has the knock-on effect of allowing users to potentially enjoy the benefits of external fan controllers or optical drives In order to keep the hardware installed in the case cool the case

Includes:: a pre-installed 80 mm fan that exhausts warm air out of the spacious case The front of the case allows for two 120 mm fans Those who prefer watercooling on the other hand will appreciate the case's ability to support a 240 mm radiator Large air vents in the front cover also help ensure the interior is kept well-supplied with fresh air The left side of the case also supports an 80- or 120 mm fan Graphics cards up to 35 cm in length are supported & CPU coolers up to 15 cm in height are also compatible in addition the IO panel located on the front provides a USB (Universal Serial Bus) 30 Type A port in addition to two USB (Universal Serial Bus) 20 ports Technical Details Dimensions 175 x 385 x 410 mm (W x D x H) Material Steel plastic Weight approx 35kg Colour Black Form factor ATX Micro-ATX Mini-ITXTotal possible fans 2x 120 mm (Front)1x 80120 mm (Side)1x 80 mm (Rear) Pre-installed 1x 80 mm (Rear) Radiator Mountings 1x 240 mm (Front) Drive Bays 3x 35 (internal)2x 25 (internal)PSU 1x Standard ATX up to 160 mm (available separately) Expansion Slots 7IO Panel 2x USB (Universal Serial Bus) 20 (internal connection)1x USB (Universal Serial Bus) 30 (internal connection)1x Audio In Out Max GPU length 350 mm Max CPU cooler height 150 mm


...