The Kolink internal USB (Universal Serial Bus) Hub is the ideal solution for increasing the amount of internal USB (Universal Serial Bus) ports available in your system Whilst most USB (Universal Serial Bus) hubs are externally mounted this board offers the possibility to duplicate the internal connections Thus for example the I O panel can be supplied via a connection The small circuit board is connected to an internal USB (Universal Serial Bus) port via the supplied cable & provides four internal USB (Universal Serial Bus) ports A separate 4-pole Molex supplies the compact USB (Universal Serial Bus) hub & the individual channels with power Mounting is via the supplied 3M adhesive strip allowing mounting to both magnetic &38; non magnetic surfaces Technical details Dimensions 95 x 12 x 29 mm (W x H x D) Material Plastic Inputs 1x USB (Universal Serial Bus) 20 internal 1x 4-pin Molex Outputs 4x USB (Universal Serial Bus) 20 internal Mounting 3M Adhesive strip ...

The modular KL-M series represents Kolink&s entrance into the German market for PC power supplies & offers particularly inexpensive models for users with low budgets & system integrators Four models cover the power range from 500 to 1000 Watts & have the official 80 Plus Bronze certification A 140 mm fan provides the electronics with the necessary cooling THE KOLINK KL-1000M POWER SUPPLY AT A GLANCECompletely modular with a total of four 6 2-Pin connectors 80 Plus Bronze certification for high efficiency Premium aesthetics thanks to black casing & black cables Powerful 70 A 12 Volt rail High compatibility thanks to its ATX form factor The 1000 Watt model in this budget series provides ample connections & performance to keep even fast computers supplied with power The electronics enable continuous output up to 840 Watts on the 12 Volt rail the 33 & 5 Volt rails offer 100 Watts In addition to the 20 4-pin motherboard connector the Kolink KL-1000M provides a 4 4-pin connector for supplying the CPU with power & four 6 2-pin connections for a fast dedicated graphics card Eight SATA & three Molex connectors are available for supplying additional components with the necessary power All cables are capable of being connected or disconnected as needed The Kolink KL-1000M certainly counts among the best value options when it comes to offering modular cable management Note As a measure to protect the environment the manufacturer does not include a power cord for connection to the mains Technical Details Dimensions 150 x 86 x 160 mm (W x H x D) Fan 140 mm (automatic control) Efficiency min 858282 percent at 5020100 percent load 80 Plus Bronze certified Active PFC (09) Form Factor ATX12V 23 Performance 1000 W 33V 18 A 5V 20 A33V 5V 100 W 12V 840 W 70 A-12V 03 A (36 W) 5 Vsb 25 A (125 W) Ports 1x 20 4-Pin 1x 4 4-Pin 4x 6 2-Pin PCIe 8x SATA3x 4-Pin Molex Warranty 2yr ...

The Kolink KL series are 80 Plus Bronze certified power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-400 is able to deliver 400w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTP The KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 1 x (400W) or 2 x (500W600W) PCI-E 6 2 pin connectors for GPU support The Kolink KL series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind SPECIFICATIONS- Power supply 200V
- 240V 50-60 Hz- Wattage 400W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Silent 12cm fan cooling- High performance components for enhanced reliability- Eco-friendly design to meet Elot 3- Support PCI express
- 1 x (400W) & 2 x (500W600W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 150mm (W) x 150mm (D)- CERo HS approved CONNECTORS- 1 x 20 4-Pin ATX12VEPS12V- 1 x 4 4-Pin ATX12VEPS12V- 1 x 6 2-Pin-PCIe- 3 x SATA- 2 x 4-Pin-Molex- 1 x FDD- Warranty 2yr



...

The Kolink KL series are 80 Plus Bronze certified power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-500 is able to deliver 500w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTPThe KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 1 x (400W) or 2 x (500W600W) PCI-E 6 2 pin connectors for GPU support The Kolink KL series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind SPECIFICATIONS- Power supply 200V
- 240V 50-60 Hz- Wattage 500W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Silent 12cm fan cooling- High performance components for enhanced reliability- Eco-friendly design to meet Elot 3- Support PCI express
- 1 x (400W) & 2 x (500W600W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 150mm (W) x 150mm (D)- CERo HS approved CONNECTORS- 1 x 20 4-Pin ATX12VEPS12V- 1 x 4 4-Pin ATX12VEPS12V- 2 x 6 2-Pin-PCIe- 4 x SATA- 3 x 4-Pin-Molex- 1 x FDD- Warranty 2yr



...

The Kolink KL Modular series are 80 Plus Bronze certified semi modular power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-500M features semi-modular funcitionality with sleeved cables & is able to deliver 500w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTP The KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 2 x (500W600W) or 4 (700W) PCI-E 6 2 pin connectors for GPU support The Kolink KL Modular series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind
- Power supply 200V
- 240V 50-60 Hz- Wattage 500W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Semi Modular operation with fixed 20 4 Pin & 4 4 Pin connectors- Silent 12cm fan cooling (automatic control)- High performance components for enhanced reliability- Sleeved Cables for both fixed & modular cables- Eco-friendly design to meet Elot 3- Support PCI express
- 2 x (500W600W) & 4 x (700W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 140mm (W) x 150mm (D)- CERo HS approved CONNECTORS- 1 x 20 4-Pin ATX12VEPS12V (Fixed)- 1 x 4 4-Pin ATX12VEPS12V (Fixed)- 2 x 6 2-Pin-PCIe- 4 x SATA- 3 x 4-Pin-Molex- 1 x FDD- Warranty 2yr




...

The Kolink KL series are 80 Plus Bronze certified power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-600 is able to deliver 600w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTP The KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 1 x (400W) 2 x (500W600W) or 4 x (700W) PCI-E 6 2 pin connectors for GPU support The Kolink KL series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind SPECIFICATIONS- Power supply 200V
- 240V 50-60 Hz- Wattage 700W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Silent 12cm fan cooling- High performance components for enhanced reliability- Eco-friendly design to meet Elot 3- Support PCI express
- 1 x (400W) 2 x (500W600W) & 4 (700W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 150mm (W) x 150mm (D)- CERo HS approved



...

The Kolink KL Modular series are 80 Plus Bronze certified semi modular power supply units aimed at the budget system build offering reliable power without a hefty price tag The KL-700M features semi-modular funcitionality with sleeved cables & is able to deliver 500w of continuous power at 80 Plus Bronze efficiency over a single rail & features multiple protections such as OVP UVP SCP OPP & OTP The KL series all meet the necessary EU requirements for standby wattage & efficiency They all contain a low noise 12cm fan & have 2 x (500W600W) or 4 (700W) PCI-E 6 2 pin connectors for GPU support The Kolink KL Modular series PSU are a perfect combination of reliability & functionality backed up with a 2 year warranty for peace of mind
- Power supply 200V
- 240V 50-60 Hz- Wattage 700W- Compliance AMD INTEL ATX 292 23EPS 80 Plus Bronze Certified- Semi Modular operation with fixed 20 4 Pin & 4 4 Pin connectors- Silent 12cm fan cooling (automatic control)- High performance components for enhanced reliability- Sleeved Cables for both fixed & modular cables- Eco-friendly design to meet Elot 3- Support PCI express
- 2 x (500W600W) & 4 x (700W)- Intelligent temperature control Noise <26d B- Multi-Protection OVP UVP SCP OPP OTP- Time MTBF 100000 hours minimum- 80 Bronze APFC high efficiency minimum 85 efficiency at 50 load 82 efficiency at a load of 20 & 100- Power consumption in standby <05 W- Temperature 40 ° C-

Dimensions 86mm (H) x 140mm (W) x 150mm (D)- CERo HS approved CONNECTORS- 1 x 20 4-Pin ATX12VEPS12V (Fixed)- 1 x 4 4-Pin ATX12VEPS12V (Fixed)- 4 x 6 2-Pin-PCIe- 6 x SATA- 3 x 4-Pin-Molex- 1 x FDD- Warranty 2yr




...

The partly modular KL-M series has been designed with low budget & system integration in mind Four models cover the power range from 500 to 850 watts & have the official 80 Plus bronze certification The cooling of the electronics is ensured by a large 120-millimeter fan The top model offered here delivers a maximum power of 850 watts & uses top-class technology while a double-forward circuit is used in the primary range the manufacturer uses DC-DC technology with independent voltage segregation in the secondary range Both the efficiency & the precision of the power supply benefit especially in the case of asymmetrical loads This 850 watt PSU of the budget series has sufficient connections & power for fast computers The electronics supply up to 744 watts continuously on the 12 volt line on the rails with 33 & 5 volt additional 100 watts are provided In addition to the 20 4-pin for the mainboard the Kolink KL-850M has a 4 4-pin connector for powering the processor & four 6 2-pin connectors for up to two fast dedicated graphics cards Six SATA & three Molex connectors are available for the other components The 20 4-pin & 4 4-pin connector as well as two 6 2-pin connectors are permanently connected to the power supply The remaining cables can be connected as required The Kolink KL-850M is thus one of the most affordable options for power supply with partial modular cable management Features Part-modular cable management with a total of four 6 2-pin connectors 80 Plus bronze certificate for high efficiency DC-DC voltage conversion for stable operation Extremely strong 62 amperes on the 12 volt line High compatibility with ATX form factor Specification Efficiency at least 858282 percent at 5020100 percent load 80 Plus Bronze certified PFC Active (09) Form Factor ATX12V 23 Power 850W (33V 20A 5V 20A 33V 5V 100W 12V 744W 62A-12V 03A (36W) 5 Vsb 2 5 A (125 W) ) Fan 120 mm (automatic control) Dimensions 150 x 86 x 160 mm (W x H x D) Connections (fixed) 1x 20 4-pin 1x 4 4-pin 2x 6 2-pin PCIe Connectors (detachable) 2x 6 2-pin PCIe 6x SATA 3x 4-pin Molex ...

Kolink are happy to introduce a range of SFX power supplies into their range These are in 250W 350W & 450W varieties & each unit is capable of reaching 80 Bronze 80 Plus 230V EU levels of efficiency
- 85 at 50 82 at 20100 Each unit meets Er P Lot 2013 with < 05W consumed on standby Each Kolink SFX power supply uses a single 12V rail for providing the most stable amount of power where it&s needed The supplied 80mm fan is profiled for quiet usage at all loads Furthermore all Kolink SFX power supplies are supplied with a 3 year warranty as standard for peace of mind Enjoy reliable yet competitively priced power in your SFX system with Kolink SFX Power Supplies! CONNECTORS 1 x 20 4-Pin ATX12VEPS12V 1 x 4-Pin ATX12V 2 x SATA 2 x 4-Pin-Molexá Warranty 3yr
...

nonl 2br Kolink are happy to introduce a range of SFX power supplies into their range These are in 250W 350W & 450W varieties & each unit is capable of reaching 80 Bronze 80 Plus 230V EU levels of efficiency
- 85 at 50 82 at 20100 Each unit meets Er P Lot 2013 with < 05W consumed on standby Each Kolink SFX power supply uses a single 12V rail for providing the most stable amount of power where it&s needed The supplied 80mm fan is profiled for quiet usage at all loads Furthermore all Kolink SFX power supplies are supplied with a 3 year warranty as standard for peace of mind Enjoy reliable yet competitively priced power in your SFX system with Kolink SFX Power Supplies! Specifications-

Dimensions 125 x 63 x 100 mm (W x H x D)- Fan 80 mm (thermal controlled)- Efficiency min 828582 2050100 load (230 volts)
- Active PFC (09)- Form factor SFXConnectors- 1 x 20 4-Pin ATX12VEPS12V- 1 x 4 4-Pin ATX12VEPS12V- 1 x 6 2-Pin-PCIe- 2 x SATA- 2 x 4-Pin-Molex- Manufacturer Warranty 3yr



...