United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Kolink Ethereal RGB Midi Tower Case - Black
Renowned for their innovative and high-performance cases Kolink has now brought the new Ethereal Midi-Tower to market representing a feature-rich gaming case that offers an abundance of space beneath its stylish exterior for all the powerful gaming hardware you could want The tempered glass side door will allow users to enjoy an unobstructed view of their high-end gaming setup complete with compatibility for E-ATX motherboards Given the use of tempered glass aesthetics are important and a PSU shroud cleverly conceals unsightly cables The front of the case has the appearance of brushed aluminium almost indistinguishable from the real thing and this accentuates the stylish exterior overall - with the digitally addressable RGB-LED strip only adding to the case's impressive aesthetics A switch
on the IO panel enables lighting control Alternatively the lighting strip can also be connected directly to the motherboard and controlled there if you prefer A fine mesh with integrated dust filter in the roof of the case helps keeps your hardware clean and dust-free A pre-installed 120mm fan provides more than adequate airflow THE FEATURES OF THE KOLINK ETHEREAL MIDI-TOWER AT A GLANCEStylish Midi-Tower supporting up to E-ATX motherboardsTempered glass side panel with hingesBrushed aluminium-look frontSmart digitally addressable RGB lighting on the frontOne pre-installed 120mm fan on the rearUp to five 120mm- and four 140mm fans possibleSpace for graphics cards up to 380mm CPU coolers up to 160mm tallIO Panel with controller for RGB-LEDs 1x USB 31 Type C 1x USB 30 und 2x USB 20KOLINK
ETHEREAL PLENTY OF SPACE FOR POWERFUL GAMING HARDWAREEven though the case's dimensions correspond to those of a Midi-Tower the Ethereal utilises its ingenious design to enable support for E-ATX motherboards Even graphics cards measuring up to 380 mm will enjoy plenty of space towards the front of the case Most CPU coolers measuring up to 160mm in height will also fit with space to spare The implementation of a smart shroud helps conceal the PSU and HDD cage in which users are free to install two 35- or two 25 drives To the rear of the motherboard lies a bracket offering support for two more 25 SSDs Those who prefer to opt for air cooling will be pleased to know that there are plenty of mounting points for 120mm fans The front allows for the installation of two 120mm- or two 140mm fans The
roof allows for either two 120mm- or two 140mm fans The roof of the case is equipped with a mesh that helps ensure maximum airflow with a minimum of unwanted dust This is also possible in no small part thanks to the smart use of dust filters meaning that the case's interior will rarely need special cleaning A single 120mm occupies a slot at the back of the case The front of the case supports a 280mm radiator and of course the rear fan can be replaced with a 120mm radiator if you prefer TEMPERED GLASS AND RGB-LEDS GET YOUR HARDWARE LOOKING GREATThanks to Kolink's clever choice of locations for the case's cable guides and brackets users can look forward to a strikingly smart and clean-looking case The spacious interior can be admired from the outside thanks to the case's use of a tempered
glass side door which of course uses hinges to make opening and closing the case a breeze A strip of digitally addressable RGB-LEDs is attached to the side of the brushed aluminium front A switch on the IO panel is responsible for controlling them along with their accompanying lighting effects Alternatively the strip can also be connected and controlled directly to the mainboard Then the RGB switch on the IO panel can also be used as a reset button In addition to the RGBReset switch there is also a USB 31 Type C slot a USB 30 slot and two USB 20 ports as well as 35 mm sockets for headphones and microphone and finally a power and HDD-LED Technical DetailsDimensions (H x B x D) 435 x 205 x 455 mmMaterial Steel tempered glass plasticWeight approx 57 kgColour BlackForm factor E-ATX ATX
Micro-ATX Mini-ITXTotal possible fans2x 120140 mm (roof)2x 120140 mm (front)1x 120 mm (rear)Pre-installed1x 120 mm rearRadiator Mountings1x 240280 mm (front)1x 120 mm (rear)Filter Roof bottomDrive bays2x 3525 (internal HDD cage)2x 25 (internal motherboard tray)PSU 1x Standard ATX (optional)Expansion slots 7IO Panel1x USB 31 Type C (internal connection)1x USB 30 Type A (internal connection)2x USB 20 (internal connection)1x Audio InOut1x RGB-Reset SwitchesMax GPU length 380 mmMax CPU cooler height 160 mmMax PSU depth 200 mm
on the IO panel enables lighting control Alternatively the lighting strip can also be connected directly to the motherboard and controlled there if you prefer A fine mesh with integrated dust filter in the roof of the case helps keeps your hardware clean and dust-free A pre-installed 120mm fan provides more than adequate airflow THE FEATURES OF THE KOLINK ETHEREAL MIDI-TOWER AT A GLANCEStylish Midi-Tower supporting up to E-ATX motherboardsTempered glass side panel with hingesBrushed aluminium-look frontSmart digitally addressable RGB lighting on the frontOne pre-installed 120mm fan on the rearUp to five 120mm- and four 140mm fans possibleSpace for graphics cards up to 380mm CPU coolers up to 160mm tallIO Panel with controller for RGB-LEDs 1x USB 31 Type C 1x USB 30 und 2x USB 20KOLINK
ETHEREAL PLENTY OF SPACE FOR POWERFUL GAMING HARDWAREEven though the case's dimensions correspond to those of a Midi-Tower the Ethereal utilises its ingenious design to enable support for E-ATX motherboards Even graphics cards measuring up to 380 mm will enjoy plenty of space towards the front of the case Most CPU coolers measuring up to 160mm in height will also fit with space to spare The implementation of a smart shroud helps conceal the PSU and HDD cage in which users are free to install two 35- or two 25 drives To the rear of the motherboard lies a bracket offering support for two more 25 SSDs Those who prefer to opt for air cooling will be pleased to know that there are plenty of mounting points for 120mm fans The front allows for the installation of two 120mm- or two 140mm fans The
roof allows for either two 120mm- or two 140mm fans The roof of the case is equipped with a mesh that helps ensure maximum airflow with a minimum of unwanted dust This is also possible in no small part thanks to the smart use of dust filters meaning that the case's interior will rarely need special cleaning A single 120mm occupies a slot at the back of the case The front of the case supports a 280mm radiator and of course the rear fan can be replaced with a 120mm radiator if you prefer TEMPERED GLASS AND RGB-LEDS GET YOUR HARDWARE LOOKING GREATThanks to Kolink's clever choice of locations for the case's cable guides and brackets users can look forward to a strikingly smart and clean-looking case The spacious interior can be admired from the outside thanks to the case's use of a tempered
glass side door which of course uses hinges to make opening and closing the case a breeze A strip of digitally addressable RGB-LEDs is attached to the side of the brushed aluminium front A switch on the IO panel is responsible for controlling them along with their accompanying lighting effects Alternatively the strip can also be connected and controlled directly to the mainboard Then the RGB switch on the IO panel can also be used as a reset button In addition to the RGBReset switch there is also a USB 31 Type C slot a USB 30 slot and two USB 20 ports as well as 35 mm sockets for headphones and microphone and finally a power and HDD-LED Technical DetailsDimensions (H x B x D) 435 x 205 x 455 mmMaterial Steel tempered glass plasticWeight approx 57 kgColour BlackForm factor E-ATX ATX
Micro-ATX Mini-ITXTotal possible fans2x 120140 mm (roof)2x 120140 mm (front)1x 120 mm (rear)Pre-installed1x 120 mm rearRadiator Mountings1x 240280 mm (front)1x 120 mm (rear)Filter Roof bottomDrive bays2x 3525 (internal HDD cage)2x 25 (internal motherboard tray)PSU 1x Standard ATX (optional)Expansion slots 7IO Panel1x USB 31 Type C (internal connection)1x USB 30 Type A (internal connection)2x USB 20 (internal connection)1x Audio InOut1x RGB-Reset SwitchesMax GPU length 380 mmMax CPU cooler height 160 mmMax PSU depth 200 mm
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark