Simple is best. RRPs Enduro Guard is the simplest solution weve seen to stopping spray from finding its way to your face. With its unique lightweight design, the Enduro Guard can be used on either the front or rear of your bike to protect both you & your bike from corrosive debris from the trail. A unique feature of the RRP Enduro Guard is Seal Guard, this enhanced bulge is specifically designed to provide extra protection for the seals of your forks & is one of the easiest ways to prolong the life of your fork seals. Large Size Offering greater protection for longer travel forks from 130mm to 200mm. The Fork Brace is normally further away from the stanchions on long travel forks so the RRP Enduro Guard has custom holes more suitable for larger forks for a snug fit. Front or Rear Compatible Enduro Guard is designed as both a front & rear mudguard & is adapted to do both jobs extremely well. Front When mounted to the front, the T shape of the RRP Enduro Guard is designed to wrap around the fork leg for a solid & neater fit. A wider curve with a flat rear end offers maximum protection & large frame clearance when compared to a simple symmetrical curve. Rear Using the two snap off holes, you can rotate the Enduro Guard to fit the rear of your bike, this allows a much better fit. You can still use the standard mounting holes if your bike uses a dropped rear brace. Seal Guard An additional bulge has been added to the RRP Enduro Guard to offer additional protection for your fork seals against the relentless attack from spray & mud without ruining the mudguards fit or aesthetics & is key to prolonging the life of your fork seals. Graphics RRP Enduro Guards are available in a wide range of colours with cool looking 2 tone screen printed graphics for long lasting looks. RRPs awesome Evil Eyes logo is featured on the front to finish off the look of the mudguards nicely. Material RRP took the more expensive route by opting for a custom thickness of polypropylene for boosted performance by making the Enduro Guard the perfect thickness for impressive durability & quality feel with the flexibility needed to fit snugly to your forks. Zip Ties All RRP Enduro Guard come with bright white zip ties in custom lengths that disappear when mounted to white forks while still offering a nice colour contrast when used on other coloured forks. We think these look great but the Enduro Guard is compatible with any Zip Ties & can easily be replaced with a colour of your choice. Fitting We recommend you warm the stickers on the Enduro Guard to reduce the amount of adhesive left behind & use soap & water to remove any residue for the perfect look. Front Fitting Remove the 4 zip ties supplied & insert them into all the holes as shown below Bend & slide mudguard into position from the front Loosely fasten up the top zip ties around the fork brace first then the legs Centralise & then tighten up the top zip ties REAL tight so it wont move Rotate the bottom zip ties until you get the desired angle & then tighten Cut off any excess from the zip ties & rotate them out of the way Rear Fitting Remove the snap-off holes either side of RRP logo as highlighted in red below Loosely attach the zip ties to the rear stays & brace Align to give you the correct tyre clearance Now do up all the zip ties REAL tight ...

Simple is best. RRPs Enduro Guard is the simplest solution weve seen to stopping spray from finding its way to your face. With its unique lightweight design, the Enduro Guard can be used on either the front or rear of your bike to protect both you & your bike from corrosive debris from the trail. A unique feature of the RRP Enduro Guard is Seal Guard, this enhanced bulge is specifically designed to provide extra protection for the seals of your forks & is one of the easiest ways to prolong the life of your fork seals. Standard Size Small enough to look good on 4X & cross country/trail bikes with custom holes for a more appropriate fit on smaller travel forks due to the brace being closer to stanchions. Front or Rear Compatible Enduro Guard is designed as both a front & rear mudguard & is adapted to do both jobs extremely well. Front When mounted to the front, the T shape of the RRP Enduro Guard is designed to wrap around the fork leg for a solid & neater fit. A wider curve with a flat rear end offers maximum protection & large frame clearance when compared to a simple symmetrical curve. Rear Using the two snap off holes, you can rotate the Enduro Guard to fit the rear of your bike, this allows a much better fit. You can still use the standard mounting holes if your bike uses a dropped rear brace. Seal Guard An additional bulge has been added to the RRP Enduro Guard to offer additional protection for your fork seals against the relentless attack from spray & mud without ruining the mudguards fit or aesthetics & is key to prolonging the life of your fork seals. Graphics RRP Enduro Guards are available in a wide range of colours with cool looking 2 tone screen printed graphics for long lasting looks. RRPs awesome Evil Eyes logo is featured on the front to finish off the look of the mudguards nicely. Material RRP took the more expensive route by opting for a custom thickness of polypropylene for boosted performance by making the Enduro Guard the perfect thickness for impressive durability & quality feel with the flexibility needed to fit snugly to your forks. Zip Ties All RRP Enduro Guard come with bright white zip ties in custom lengths that disappear when mounted to white forks while still offering a nice colour contrast when used on other coloured forks. We think these look great but the Enduro Guard is compatible with any Zip Ties & can easily be replaced with a colour of your choice. Fitting We recommend you warm the stickers on the Enduro Guard to reduce the amount of adhesive left behind & use soap & water to remove any residue for the perfect look. Front Fitting Remove the 4 zip ties supplied & insert them into all the holes as shown below Bend & slide mudguard into position from the front Loosely fasten up the top zip ties around the fork brace first then the legs Centralise & then tighten up the top zip ties REAL tight so it wont move Rotate the bottom zip ties until you get the desired angle & then tighten Cut off any excess from the zip ties & rotate them out of the way Rear Fitting Remove the snap-off holes either side of RRP logo as highlighted in red below Loosely attach the zip ties to the rear stays & brace Align to give you the correct tyre clearance Now do up all the zip ties REAL tight ...

RRPs Rear Guard is the perfect last minute mudguard for all off-road & on-road riding, taking less than 30 seconds to apply, the Rear Guard will keep both you & your bike clean from dirt. Very effective & fast fitting, the Rear Guard simply attaches the saddle rails with 2 velcro straps. Thanks to its custom thickness polypropylene, the Rear Guard is not flimsy like some mudguards, offering an excellent fit in the process. The tough fitting strap will work with any seatposts including aero posts. Ideal for road, mountain & cyclo-cross bikes One size fits all Velcro fitting strap included 33g ...

The Mico Pro is the ideal back up light. The intelligent Dual LED means it can operate as your front or rear light. 1 high grade dual LED Generates white & red light This LED can be used for front or rear light Constant & flashing modes 9 hour runtime Tool free mounting system Lithium polymer battery Direct USB (Universal Serial Bus) charging Low battery indicator Water resistant ...

This compact single LED front light generates 35 lumens & is USB (Universal Serial Bus) rechargeable. 1 High grade LED 35 Lumen output Constant & flashing modes 9 hour run time Lithium polymer battery Tool free mounting Direct USB (Universal Serial Bus) charging Low battery indicator Silicone housing Water resistant ...

These RSP mini front & rear bike lights offer a high grade LED, constant & flashing modes, a tool-free mounting system, direct USB (Universal Serial Bus) charging, low battery indicator & a 9 hour runtime, all in a water resistant silicone housing. Perfect for when you need to be safe & seen whatever the weather. ...

The RSP Mico 1 LED rear bike light is a compact & USB (Universal Serial Bus) rechargeable back up light or a additional light option. • 1 high grade LED • Constant & flashing modes • 9 hour runtime • Tool free mounting system • Lithium polymer battery • Direct USB (Universal Serial Bus) charging • Low battery indicator • Silicone housing • 30mm wide x 20mm high x 60mm depth ...

RSP 22 Function Wireless Cycle Computers are slim & lightweight cycling computers which offer a wide range of functions to supply detailed riding information. The RSP 22 Function Wireless Cycle Computer features an integrated heart rate monitor & comes complete with a wireless heart rate chest strap which is a superb training aid for any cyclist.

Features: Clock 12/24hr Current pulse Average pulse Speedometer km/hr or m/hr Average speed km/hr or m/hr Maximum speed km/hr or m/hr Speed comparator Trip meter Odometer Riding time Temperature Re-set trip distance, trip timer, average speed & average pulse without loosing other data Odometer save function Auto save function, auto start stop Auto off after 5 minutes Auto scan Maintenance program Max/min temperature Fat burn Calorie count KM/hr or M/hr selection available Fully wireless system

...

The RSP Astrum Super Bright Rear Light is a super powerful rear light which combines 2 1/2 watt LEDS for an exceptionally bright light which is visible from miles away & is specifically designed to keep you safe at night & is one of the best rear lights on the market. A stunningly bright rear LED cycle light from Raleighs RSP brand, this light has had a multitude of great reviews with cycling weekly giving it 9 out of 10, Road CC giving it 4 out of 5 & The Bike list 9 out of 10 ...

RALEIGH REAR CARRIER PANNIER COMMUTER RACK MOUNT LED BIKE CYCLE LIGHT NEW The Raleigh Carrier Mounted Rear Light is a lightweight rear light which is designed to be mounted onto the rear bike carrier & offers a super bright 5 LED construction which keeps you safe & seen when riding at night. Power Supply
- 2 x AAA 5 LEDs Rear Red Fits to most rear cycle pannier racks
...