About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Park Tool TNS-4 Deluxe Threadless Nut Setter
Park Tool TNS-4
Deluxe Threadless Nut
Setter
£26.99
The TNS-4 makes it quick & easy to install star-fangled nuts used with 1” & 1-1/8” threadless headset systems. Using a durable steel driver & built-in guide, the TNS-4 perfectly aligns the star-fangled nut & sets it to the proper depth every time. The unique design virtually eliminates pinched fingers. Replaceable set screw (822). ...
Available
Park Tool TOOL Park Cone Wrench 14 mm
Park Tool TOOL Park
Cone Wrench 14 Mm
£8.49
The Park Tool Cone Wrench / Spanner offers a military grade finish with unmatched quality & performance & have become the standard of the bicycle industry.14mm cone wrench / spanner The Y-head design puts material where it is needed for strength & durability Military grade phosphate finish ensures an accurate fit & consistent quality Thin enough to be used on the narrowest of cones High strength tool steel Long vinyl dipped handle for leverage & comfort Made in the USA & covered by Park Tool's legendary limited lifetime warranty ...
Available
image missing
Park Tool TS-25 Repair
Stand Mounted Truing
Stand
£31.49
Small, lightweight & accurate, the TS-25 Truing Stand securely holds any wheel using a quick release or threaded axle & adjusts for any wheel diameter & rim width. Installs & removes quickly & easily. Fits PRS-25 & PCS-10 Repair Stands. Will also fit the PCS-1 & PCS-4-1, PCS-4-2, & PCS-4 Repair Stands when used with the adjustable height extension. For thru axle hubs, it is necessary to also use the TS-TA Thru Axle Adaptor to take the place of the quick release skewer. ...
Available
Park Tool TS-2EXT.2 Upright Extensions And Thru Axle Adapators
Park Tool TS-2EXT.2
Upright Extensions And
Thru Axle Adapators
£42.99
TS-2EXT.2 Truing Stand Upright Extensions install in seconds on any TS-2 Truing St&, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat & downhill bikes), as well as on wheels with a 29” mountain bike tire installed. In addition, specially sized bosses on the TS-2EXT.2 serve as adaptors so the TS-2 Truing Stand can be used with wheels using 12mm, 15mm, 20mm or 25mm thru-axle hubs with removable axles. NOTE: The TS-2.2 does not require this adaptor to accommodate 29 wheels but does require it to fit hub widths from 180mm to 200mm. ...
Available
Park Tool TS-8 Home Mechanic Wheel Truing Stand
Park Tool TS-8 Home
Mechanic Wheel Truing
Stand
£89.99
Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16” to 29”, with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the st&. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability. ...
Available
Park Tool TS-TA Thru Axle Adaptors
Park Tool TS-TA Thru
Axle Adaptors
£44.99
The TS-TA makes it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, & 25mm thru axle front wheels, as well as Cannondale Lefty wheels. The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 & TS-3. The TS-TA when used in the TS-8, TS-25, TS-15, TS-7 or TS-5 will work with all rear thru axle hubs. ...
Available
Park Tool TS2-EXT TS2 Truing Stand Upright Extension
Park Tool TS2-EXT TS2
Truing Stand Upright
Extension
£34.99
Extensions to enable the TS2 wheel truing stand to take 20 mm thru-axle, extra wide hubs & very large diameter rim & tyre combinations. TS-2EXT Truing Stand Upright Extensions install in seconds on any TS-2 Truing St&, allowing the stand to be used on wheels with 160 mm width hubs including tandem & downhill bikes, as well as on 700C wheels with a 29 inch mountain bike tyre installed. In addition, specially sized bosses on the TS-2EXT serve as adaptors so the TS-2 Truing Stand can be used with wheels using 20 mm through axle hubs. ...
Available
Park Tool TW-5 Ratcheting Torque Wrench
Park Tool TW-5
Ratcheting Torque
Wrench
£89.99
With todays lightweight components, torque wrench use in the shop is no longer an option—its a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure & apply the proper amount of torque to a components threaded fastener (s). It is designed for lower torque settings that a shop or consumer would use for proper seat post, seat clamp & handlebar / stem applications. Comes with its own protective case. ...
Available
Park Tool TW-6 Big Clicker Ratcheting Torque Wrench
Park Tool TW-6 Big
Clicker Ratcheting
Torque Wrench
£109.99
With today’s lightweight components, torque wrench use in the shop is no longer an option—it’s a must for every mechanic. The TW-6 is a high quality, ratcheting, click type torque wrenches that accurately measure & apply the proper amount of torque to a component’s threaded fastener (s). Designed for higher torque settings for repairs & installation in the bottom bracket, cassette lockring & other areas that use a higher torque settings. For lower torque setting, see the TW-5 or TW-1. Comes with its own protective case. ...
Available
Park Tool TWS2C - Fold-Up Torx Wrench Set
Park Tool TWS2C -
Fold-Up Torx Wrench
Set
£19.99
Park Tool TWS2C
- Fold-Up Torx Wrench Set. The TWS2C
- Fold-Up Torx Wrench Set is a selection of essential wrenches in a fold

...
Available

Park Tool TS-RK TS-2 Professional Rebuilt Kit

The TS-RK is a complete rebuild kit for the TS-2 truing stand. It is complete with the most commonly replaced small parts and the instructions needed to get your stand back into top working condition. In addition to making the stand more accurate and reliable, once installed, the new parts also allow the stand to be readjusted much more easily, should it be thrown out of adjustment. This is a great addition to the older TS-2 stands. If your stand has silver-colored shaft collars, upgrade with the TS-RK.
Buy
Availability: In Stock
£31.49
cycling 252
Description Reviews / Comments Add New

Product Description

The TS-RK is a complete rebuild kit for the TS-2 truing st&. It is complete with the most commonly replaced small parts & the instructions needed to get your stand back into top working condition. In addition to making the stand more accurate & reliable, once installed, the new parts also allow the stand to be readjusted much more easily, should it be thrown out of adjustment. This is a great addition to the older TS-2 stands. If your stand has silver-colored shaft collars, upgrade with the TS-RK.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Silver - A colour based on the colour of the metal
Silver - A chemical element, metalic. Has the highest elctrical conductance of any element. Also known for its exceptional anitmicrobal properties
professional - A term used to describe products or people which may be focused on specialist educational training
Small - something that takes up less space than normal.
Condition - The quality of a product or service.
Accurate - A measurement of precision when all elements are correct.
Professional - A person that is trained within a profession.
Instructions - An informative direction to take.
Reliable - Something that is consistently good and can be trusted.

Supplier Information

Rutland Cycling
Page Updated: 2021-08-13 03:14:02

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu