The HP NC112T is a low-priced Gigabit Ethernet server adapter that features single-port, copper, single lane (x 1) PCI Express capability, with 32KB onboard memory that provides 10/100/1000T auto-negotiated speed & duplex. It makes use of the Intel 82574L silicon & is suitable for both standard & low profile slots. ...

The HP NC360m is a HP Blade System c-Class network adapter providing two Gigabit Ethernet ports on a single mezzanine card. With the addition of the NC360m, HP Blade System c-Class customers now have the choice of an HP network adapter that uses either an Intel or Broadcom controller. The NC360m is designed for applications requiring additional Gigabit Ethernet ports than those provided on the server. It is ideal for virtualization, security, server consolidation, network segmentation & other Blade System applications requiring additional network port density. ...

The HP NC365T 4-port Ethernet server adapter is a four lanes (x 4) PCI Express (PCIe) high performing single-chip, low-power quad port adapter. The NC365T is PCIe Gen 2.0 compliant adapter that supports TCP checksum & segmentation, Large Send & Receive offload capability, Message Signal Interrupt Extension (MSI-X), IEEE 1588, Receive Side Scaling (RSS), VLAN tagging, 9.5KB jumbo frames & IPv 6. The NC365T ships with support for an advanced server virtualization feature called Virtual Machine Data queue (VMDq), which improves I/O performance by reducing I/O overhead in a virtualized environment. ...

In today's resource constrained environments, there is a predominant need to simplify infrastructure, improve manageability, optimize network performance & lower the cost of computing. The NC375T helps achieve performance scalability for consolidated server environments at an optimum price. NC375T offers four 10/100/1000T Gigabit Ethernet ports on a single card, saving valuable server I/O slots for other purposes. The NC375T is a low-profile card with both full height & half height brackets included in the kit & its x 4 PCI Express interface is compatible with x 4, x 8, & x 16 PCI slots. ...

The HP NC382m is a multifunction adapter that combines standard Gigabit Ethernet networking, TCP/IP offload engine (TOE) accelerations for Microsoft Windows, & i SCSI boot into a single mezzanine card. This x 4 PCI Express dual-port adapter is supported on all HP Blade System Pro Liant c-Class servers in all mezzanine slots. Multiple adapters can be installed per server. In addition to its multifunction capabilities, the NC382m adapter ships with advanced server features that Pro Liant customers have come to expect, such as support for failover & load balancing, TCP/IP checksum offloading, large send offloading, PXE, jumbo frames, VLAN tagging, Qo S, & much more. ...

The NC523SFP is an eight lane (x 8) PCI Express (PCIe) 10 Gigabit network solution offering superior bandwidth in a Pro Liant Ethernet adapter. This dual port PCI Express Gen 2 adapter supports SFP+ (Small Form-factor Pluggable) connectors, requiring either Direct Attach Cable (DAC) for copper environments, or fiber transceivers & fiber cables for fiber optic environments. The NC523SFP ships with advanced server features that Pro Liant customers have come to expect, such as support for TCP checksum & segmentation (LSO) offload capability, VLAN tagging, jumbo frames, IPv 6, & more. Flexible to order & install, the NC523SFP can be used in either standard or low profile slots. ...

The NC532m is a Flex-10 enabled 10 Gigabit Ethernet network adapter for the Pro Liant c-Class Blade System. The adapter is a dual port 10 Gb E mezzanine, that when paired with the new 10 Gb Virtual Connect Module provides up to eight physical function NICs that can be configured to operate at any speed from 100 Mbs to 10 Gbs. The NC532m will also support 10 Gb connections when paired with the 6120XG Blade Switch. The adapter ships support for VLAN tagging, Qo S, teaming (bonding), Receive Side Scaling (RSS) & PXE. ...

The NC550SFP is an eight lane (x 8) PCI Express (PCIe) 10 Gigabit network solution offering optimal throughput for a Pro Liant Ethernet adapter. This PCI Express Gen 2 adapter ships with two SFP+ (Small Form-factor Pluggable) cages suitable for connecting to Direct Attach Cable (DAC) or fiber modules supporting SR fiber optic cabling. ...

The NC552SFP is an eight lane PCI Express (PCIe) 10 Gigabit network solution offering optimal throughput. This PCI Express adapter ships with two SFP+ (Small Form-factor Pluggable) cages suitable for connecting to Direct Attach Cable (DAC) or an SR fiber module supporting fiber optic cabling. ...

HPE Next Business Day Hardware Exchange & Software Support
- extended service agreement
- 3 years
- shipment ...