This highest-performing family of access points improves productivity & is the first in the industry to offer three spatial stream MIMO technology, bringing IEEE 802.11n near Gigabit Ethernet performance to 900 Mbps & enhancing coverage areas with beamforming technology. These APs deliver the highest performance in 802.11n AP technology in the market today with the best price & performance in the industry. Each dual radio 802.11n access point operates in the 2.4 G Hz & 5 G Hz bands, providing backward compatibility for IEEE 802.11a/b/g legacy technologies. These APs can operate with or without a wireless controller & support all the same enterprise features as the prior HP E-series MSM wireless products, in addition to more features, such as beamforming, bandsteering, & concurrent 5 G Hz operation. ...

This highest-performing family of access points improves productivity & is the first in the industry to offer three spatial stream MIMO technology, bringing IEEE 802.11n near Gigabit Ethernet performance to 900 Mbps & enhancing coverage areas with beamforming technology. These APs deliver the highest performance in 802.11n AP technology in the market today with the best price & performance in the industry. Each dual radio 802.11n access point operates in the 2.4 G Hz & 5 G Hz bands, providing backward compatibility for IEEE 802.11a/b/g legacy technologies. These APs can operate with or without a wireless controller & support all the same enterprise features as the prior HP E-series MSM wireless products, in addition to more features, such as beamforming, bandsteering, & concurrent 5 G Hz operation. ...

This high-performance access point improves productivity. This brings IEEE 802.11n near Gigabit Ethernet performance to 900 Mbps & enhances coverage areas with beamforming technology. The AP delivers the high performance in 802.11n AP technology with outstanding price & performance. The dual radio 802.11n access point operates in the 2.4 GHz & 5 GHz bands, providing backward compatibility for IEEE 802.11 a/b/g legacy client devices. The AP can operate with or without a wireless controller & support all the same enterprise features as the prior HP MSM wireless products, in addition to the features, such as beamforming, bandsteering, & concurrent 5 GHz operation. The MSM466-R access point also supports a range of MIMO antennas, while the MSM466-R access point is in an outdoor enclosure & is designed to work under adverse conditions. ...

The HP A-MSR20 series features a modular design that delivers unmatched flexibility for small branch offices & small to medium-sized businesses, while reducing complexity, simplifying management, & increasing control. The A-MSR20 routers provide a full-featured, resilient routing platform. They offer lasting investment protection, & help reduce capital & operating expenses. These routers enable an agile, flexible network infrastructure that offers the ability to quickly adapt to changing business requirements, while delivering integrated, concurrent services on a single, easy-to-manage platform. ...

Featuring advanced software & an industry-leading hardware platform, the HP A-MSR 900 series multi-service routers provide enhanced performance, security, & reliability for enterprise networks. The perfect appliance for delivering converged network solutions, including data, voice & video, IPv 6 support, & robust quality of service (Qo S), help ensure that these routers can not only handle the enterprise networking applications of today, but future connectivity & capacity demands as well. in addition, a standards-based design provides complete interoperability in multi-vendor environments. ...

The HP NC360m is a HP Blade System c-Class network adapter providing two Gigabit Ethernet ports on a single mezzanine card. With the addition of the NC360m, HP Blade System c-Class customers now have the choice of an HP network adapter that uses either an Intel or Broadcom controller. The NC360m is designed for applications requiring additional Gigabit Ethernet ports than those provided on the server. It is ideal for virtualization, security, server consolidation, network segmentation & other Blade System applications requiring additional network port density. ...

The HP NC365T 4-port Ethernet server adapter is a four lanes (x 4) PCI Express (PCIe) high performing single-chip, low-power quad port adapter. The NC365T is PCIe Gen 2.0 compliant adapter that supports TCP checksum & segmentation, Large Send & Receive offload capability, Message Signal Interrupt Extension (MSI-X), IEEE 1588, Receive Side Scaling (RSS), VLAN tagging, 9.5KB jumbo frames & IPv 6. The NC365T ships with support for an advanced server virtualization feature called Virtual Machine Data queue (VMDq), which improves I/O performance by reducing I/O overhead in a virtualized environment. ...

In today's resource constrained environments, there is a predominant need to simplify infrastructure, improve manageability, optimize network performance & lower the cost of computing. The NC375T helps achieve performance scalability for consolidated server environments at an optimum price. NC375T offers four 10/100/1000T Gigabit Ethernet ports on a single card, saving valuable server I/O slots for other purposes. The NC375T is a low-profile card with both full height & half height brackets included in the kit & its x 4 PCI Express interface is compatible with x 4, x 8, & x 16 PCI slots. ...

The HP NC382m is a multifunction adapter that combines standard Gigabit Ethernet networking, TCP/IP offload engine (TOE) accelerations for Microsoft Windows, & i SCSI boot into a single mezzanine card. This x 4 PCI Express dual-port adapter is supported on all HP Blade System Pro Liant c-Class servers in all mezzanine slots. Multiple adapters can be installed per server. In addition to its multifunction capabilities, the NC382m adapter ships with advanced server features that Pro Liant customers have come to expect, such as support for failover & load balancing, TCP/IP checksum offloading, large send offloading, PXE, jumbo frames, VLAN tagging, Qo S, & much more. ...

The NC522SFP is an eight lane (x 8) PCI Express (PCIe) 10 Gigabit network solution offering the highest bandwidth available in a Pro Liant Ethernet adapter. This PCI Express Gen 2 adapter ships with two SFP+ (Small Form-factor Pluggable) cages suitable for connecting to Direct Attach Cable (DAC) or fiber modules supporting SR, LR, & LRM fiber optic cabling. The NC522SFP allows customers both flexibility & the ability to provision their Pro Liant servers with bandwidth for every need. ...