More From Contributor

£11.04
Universal backing pads suitable for Angle Disc grinders. These flexible pads are used with resin fibre discs & are supplied complete with a locknut. Abrasive Disc Size. 178 mm x 22 mm (7.1/2in). Machines Fitted. M14, Internal Thread & quick release lock nut. Bosch High Frequency machines Bosch 1323, 1328, Black & Decker LEM/LUM. Type. 171
- XM. To suit. 178 mm Angle Grinders. Thread. M14 x 2. Pin Spanner
- Blue

...
Archived Product
£8.51
Monument have produced Autocut copper pipe cutters that are specially designed for cutting copper pipes in awkward places. It also only cuts in one direction so you get the perfect cut edge, all the time, every time, so this will help to solve leaks & uneven joints. It will only cut the exact size of copper pipe specified & is NOT for use on stainless steel. Ratchet handles 15R & 22R will fit 15mm, 22mm & 21mm Monument Autocuts. Size. 15mm. Spare wheel to fit is available (MON269). ...
Archived Product
£10.15
Monument have produced Autocut copper pipe cutters that are specially designed for cutting copper pipes in awkward places. It also only cuts in one direction so you get the perfect cut edge, all the time, every time, so this will help to solve leaks & uneven joints. It will only cut the exact size of copper pipe specified & is NOT for use on stainless steel. Ratchet handles 15R & 22R will fit 15mm, 22mm & 21mm Monument Autocuts. Size 21mm ...
Archived Product
£9.35
Monument have produced Autocut copper pipe cutters that are specially designed for cutting copper pipes in awkward places. It also only cuts in one direction so you get the perfect cut edge, all the time, every time, so this will help to solve leaks & uneven joints. It will only cut the exact size of copper pipe specified & is NOT for use on stainless steel. Ratchet handles 15R & 22R will fit 15mm, 22mm & 21mm Monument Autocuts. Size 22mm. Spare wheel to fit is available (MON269). ...
Archived Product
£17.33
Monument have produced Autocut copper pipe cutters that are specially designed for cutting copper pipes in awkward places. It also only cuts in one direction so you get the perfect cut edge, all the time, every time, so this will help to solve leaks & uneven joints. It will only cut the exact size of copper pipe specified & is NOT for use on stainless steel. Ratchet handles 15R & 22R will fit 15mm, 22mm & 21mm Monument Autocuts. Size 28mm. ...
Archived Product
£26.90
Feeler gauges are used to adjust tappets, spark plugs, distributor points, checking bearing clearances & gear play, fitting pistons, rings & pins & gauging narrow slots. Leaves are tempered steel, easily removed & replaced. There are locking device on all sets. Inch Reading Gauges with Tapered leaves 1/2-1/4 x 6 in No. of leaves: 8 Range: 0.002
- 0.015 in (0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015 in).
...
Archived Product
£20.17
Feeler gauges are used to adjust tappets, spark plugs, distributor points, checking bearing clearances & gear play, fitting pistons, rings & pins & gauging narrow slots. Leaves are tempered steel, easily removed & replaced. There are locking device on all sets. Millimetre Reading Gauges with Tapered leaves 12.7-7 x 114mm No. of leaves: 9 Range 0.04
- 0.3mm (0.04-0.08 by 0.01mm steps, 0.10, 0.15, 0.20 & 0.30mm).
...
Archived Product
£55.82
For removing stiff backnuts Rapid tap installation for 1/2-inch BSP & 3/4-inch BSP Taps Tool stays in position on the tap tail Complete with 3/8-inch cordless drill adaptor, 1/2-inch square drive Extension tube The Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps & to make tap installation a more rapid process, this tool is for 1/2-inch. BSP & 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand & uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Ideal for 1/2-inch & 3/4-inch BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. The MON173 is complete with 3/8-inch cordless drill adaptor, 1/2-inch square drive, extension tube & full user instructions. For removing stiff backnuts & rapid tap installation for 1/2-in CH. BSP & 3/4-inch. BSP Taps. Tool stays in position on the tap tail. Uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Monument Stiffnuts Professional Boxed Kit. 1/2-inch. & 3/4-inch. BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. Complete with 3/8-inch. Cordless drill adaptor, 1/2-inch. Square Drive; Extension tube & full instructions. ...
Archived Product
£20.17
Feeler gauges are used to adjust tappets, spark plugs, distributor points, checking bearing clearances & gear play, fitting pistons, rings & pins & gauging narrow slots. Leaves are tempered steel, easily removed & replaced. There are locking device on all sets. Millimetre Reading Gauges with Straight leaves 12.7 x 77mm No. of leaves: 13 Range: 0.03
- 0.5mm (0.03- 0.10 by 0.01 mm steps, 0.15, 0.20 to 0.50 by 0.1 mm steps)
...
Archived Product
£21.84
Feeler gauges are used to adjust tappets, spark plugs, distributor points, checking bearing clearances & gear play, fitting pistons, rings & pins & gauging narrow slots. Leaves are tempered steel, easily removed & replaced. There are locking device on all sets. Millimetre Reading Gauges with Tapered leaves 12.7-7 x 77mm, No. of leaves: 13 Range 0.03
- 0.5mm (0.03 to 0.10 by 0.01mm steps, 0.15, 0.20, 0.30, 0.40 & 0.50mm).
...
Archived Product

172AT Feeler Gauge 9 Piece Set 0.0015-0.015

Feeler gauges are used to adjust tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There are locking device on all sets. Inch Reading Gauges with Tapered leaves 1/2-1/4 x 3 1/32 in No. of leaves: 9 Range: 0.0015 - 0.015 in (0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015 in).
RIP - This product is no longer available on our network. It was last seen on 03.07.2013

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£16.14

Product Description

Feeler gauges are used to adjust tappets, spark plugs, distributor points, checking bearing clearances & gear play, fitting pistons, rings & pins & gauging narrow slots. Leaves are tempered steel, easily removed & replaced. There are locking device on all sets. Inch Reading Gauges with Tapered leaves 1/2-1/4 x 3 1/32 in No. of leaves: 9 Range: 0.0015
- 0.015 in (0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015 in).

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Steel - An alloy made predominately of Iron combined with <2% carbon
Inch - Equivalent to approximately 2.5cm
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.

Supplier Information

Page Updated: 2012-12-03 20:01:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu