Flat Angle Coil Pattern Ring Coil Nails To Suit: N71C-1-E, N75C-2-E, N80CB-1ML, N89C-1P-E, N89C-2K-E Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet & crate, fencing, garden furniture & the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation Angle Bright finish is without any form of protection & is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped & is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. 2.8 mm Ring Coil Nails Nail Finish. Galvanised Nail Length. 50 mm Qty. Box of 7500 ...

Flat Angle Coil Pattern Ring Coil Nails To Suit: N71C-1-E, N75C-2-E, N80CB-1ML, N89C-1P-E, N89C-2K-E Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet & crate, fencing, garden furniture & the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation Angle Bright finish is without any form of protection & is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped & is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. 2.8 mm Ring Coil Nails Nail Finish. Galvanised Nail Length. 65 mm Qty. Box of 5000 ...

This latest evolution of the best selling N88WW framer brings even more power to job with a 5% increase in driving power together with a weight reduction. The wasted body design gives a much enhanced sightline to the tool nose. The handle has been lowered to improve balance & comfort in use; along with other design improvements these features will keep this tool firmly at no 1 in the pneumatic framing market. Its use of 28 degree wire collated nails keeps consumable costs to a minimum. Use for all your framing & first fix applications. Operating pressure PSI 70
- 120 BAR 4.8
- 8.3 Air consumption L per shot @ 5.6 bar 2.47 Noise LPA 1sd 96.3 LWA 1sd 100.1 LPA 1s, 1m 87.1 Vibration m/s 2 2.47 Driving Power: 1050 inch/lbs Magazine Capacity: 90 Weight: 3.5kg

...

Dormer circular split dies can be used by hand or machine. Because the die has a split it can be adjusted slightly to provide a thread slightly smaller or larger than the norm. Metric Coarse Adjustable Dies. Application: For Production of components less than three times diameter in length. Tolerance: 6g Adjustable Chamfer Lead: Two Threads Surface treatment: Bright

Material: HSS
- High Speed Steel BS1127:1950 Thread 10mm x 1.50 Diameter 1 5/16 in


...

Dormer circular split dies can be used by hand or machine. Because the die has a split it can be adjusted slightly to provide a thread slightly smaller or larger than the norm. Metric Coarse Adjustable Dies. Application: For Production of components less than three times diameter in length. Tolerance: 6g Adjustable Chamfer Lead: Two Threads Surface treatment: Bright

Material: HSS
- High Speed Steel BS1127:1950 Thread 10mm x 1.50 Diameter 1 1/2 in


...

Dormer circular split dies can be used by hand or machine. Because the die has a split it can be adjusted slightly to provide a thread slightly smaller or larger than the norm. Metric Coarse Adjustable Dies. Application: For Production of components less than three times diameter in length. Tolerance: 6g Adjustable Chamfer Lead: Two Threads Surface treatment: Bright

Material: HSS
- High Speed Steel BS1127:1950 Thread 16mm x 2.00 Diameter 1 1/2 in


...

Dormer circular split dies can be used by hand or machine. Because the die has a split it can be adjusted slightly to provide a thread slightly smaller or larger than the norm. Metric Coarse Adjustable Dies. Application: For Production of components less than three times diameter in length. Tolerance: 6g Adjustable Chamfer Lead: Two Threads Surface treatment: Bright

Material: HSS
- High Speed Steel BS1127:1950 Thread 20mm x 2.50 Diameter 1 1/2 in


...

Dormer circular split dies can be used by hand or machine. Because the die has a split it can be adjusted slightly to provide a thread slightly smaller or larger than the norm. Metric Coarse Adjustable Dies. Application: For Production of components less than three times diameter in length. Tolerance: 6g Adjustable Chamfer Lead: Two Threads Surface treatment: Bright

Material: HSS
- High Speed Steel BS1127:1950 Thread 4mm x 0.70 Diameter 13/16 in


...

Dormer circular split dies can be used by hand or machine. Because the die has a split it can be adjusted slightly to provide a thread slightly smaller or larger than the norm. Metric Coarse Adjustable Dies. Application: For Production of components less than three times diameter in length. Tolerance: 6g Adjustable Chamfer Lead: Two Threads Surface treatment: Bright

Material: HSS
- High Speed Steel BS1127:1950 Thread 5mm x 0.80 Diameter 13/16 in


...

Dormer circular split dies can be used by hand or machine. Because the die has a split it can be adjusted slightly to provide a thread slightly smaller or larger than the norm. Metric Coarse Adjustable Dies. Application: For Production of components less than three times diameter in length. Tolerance: 6g Adjustable Chamfer Lead: Two Threads Surface treatment: Bright

Material: HSS
- High Speed Steel BS1127:1950 Thread 6mm x 1.00 Diameter 1 in


...