Kingston Value RAM's 1G x 64-bit (8GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2 Rx 8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDE standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 204-pin DIMM uses gold contact fingers. The electrical & mechanical specifications are as follows:
- JEDEC standard 1.35V (1.28V ~1.45V) & 1.5V (1.425V ~ 1.575V) Power Supply
- VDDQ = 1.35V (1.28V ~ 1.45V) & 1.5V (1.425V ~ 1.575V)
- 800 M Hz f CK for 1600 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- 8 -bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C TCASE 95°C
- Asynchronous Reset
- PCB: Height 1.18” (30mm), double sided component















...

An essential for your mobile lifestyle. This mobile-ready reader eliminates the need to carry additional USB (Universal Serial Bus) transfer cables & the typical wait associated with slow Bluetooth file transfers between phones & PCs. It also replaces your SD card adapter, since the micro SD card fits directly into the reader. When in use, the micro SD Card Reader appears as a drive letter (i.e. E:) & data transfer is as simple as drag & drop. Use the reader with a micro SD/micro SDHC/micro SDXC card to get the storage capacity for a variety of helpful transfers, or acquire content to side load to your phone, including:
- Backing up your friends’, relatives’ or business contact information when you change phones
- Moving the digital music library stored on your PC for use on your phone
- Transferring a video captured on your camera phone to upload to the web without using additional network minutes
- Downloading new mobile applications on your PC for use on your phone without using network time. The reader is backed by a two-year warranty & Kingston’s legendary service & support. It has an included keychain, so you can hang it from your phone for the convenient solution you need to complement your mobile lifestyle. Store your entire mobile life
- photos, songs, text messages, video clips, personal information on a micro SD/micro SDHC/micro SDXC card, then work with it across device platforms seamlessly with the micro SD Card Reader.




...

Kingston’s Mobile Lite Duo 3C is a micro SD card reader that works well with the latest devices that have limited USB (Universal Serial Bus) Type-C ports, as well as notebooks that use USB (Universal Serial Bus) Type-A. This versatile device has a small metallic form factor so it easily fits in a pocket, handbag or backpack & is ideal for personal or professional use. Offload files & photos quicker using the USB (Universal Serial Bus) Type-C port which supports up to 10mb/s transfer speeds¹ & has a universal connector that plugs in easily. This versatile device reads micro SD/SDHC/SDXC, UHS-I & supports the latest card speeds. Mobile Lite Duo 3C is compliant with the USB (Universal Serial Bus) 3.1 Gen 1 ¹ (USB 3.0)

Specification & delivers incredible performance to save time when transferring videos, photos & other large file sizes. It is backwards compatible with USB (Universal Serial Bus) 2.0 ports to allow users to migrate to USB (Universal Serial Bus) 3.0 in the future, using one card reader. Mobile Lite Duo 3C is backed by free technical support & legendary Kingston reliability. Dual interface Works with older & newer systems thanks to the USB (Universal Serial Bus)-A & USB (Universal Serial Bus)-C interfaces. Compact The lightweight storage solution that’s easy to throw in a pocket or backpack. Rugged portability Thanks to the metal casing, you can bring it wherever your adventure takes you. USB (Universal Serial Bus) 3.1 Gen 1 (USB 3.0) support Download photos & videos quickly to share online.

...

Kingston’s Mobile Lite Duo 3C is a micro SD card reader that works well with the latest devices that have limited USB (Universal Serial Bus) Type-C ports, as well as notebooks that use USB (Universal Serial Bus) Type-A. This versatile device has a small metallic form factor so it easily fits in a pocket, handbag or backpack & is ideal for personal or professional use. Offload files & photos quicker using the USB (Universal Serial Bus) Type-C port which supports up to 10mb/s transfer speeds¹ & has a universal connector that plugs in easily. This versatile device reads micro SD/SDHC/SDXC, UHS-I & supports the latest card speeds. Mobile Lite Duo 3C is compliant with the USB (Universal Serial Bus) 3.1 Gen 1 ¹ (USB 3.0)

Specification & delivers incredible performance to save time when transferring videos, photos & other large file sizes. It is backwards compatible with USB (Universal Serial Bus) 2.0 ports to allow users to migrate to USB (Universal Serial Bus) 3.0 in the future, using one card reader. Mobile Lite Duo 3C is backed by free technical support & legendary Kingston reliability. Dual interface Works with

...

Kingston’s Mobile Lite Wireless G3 Pro charges smartphones & tablets faster, with a 2A output charging maximum, & charges phones up to 2x from a single, fully charged MLWG3. Mobile Lite Wireless Pro adds 64GB of built-in storage, extendable via USB (Universal Serial Bus) drives & SD cards, & up to 2.5x charge via its 6, 700 m Ah battery. Both G3 & G3 Pro drives have premium Japanese battery cells that make the battery more reliable & longer lasting than their competitors’ Access USB (Universal Serial Bus) Flash drives & SD cards wirelessly from smartphones & tablets to free up space, make backup copies of important photos, videos, contact & calendar entries & transfer files to a new phone or tablet without using a PC. Save by not paying monthly fees for cloud-based backup services. MLWG3 & MLW Pro have an SD card slot & a USB (Universal Serial Bus) port & come with a micro SD to SD card adapter. MLWG3 & MLW Pro work with Android, Amazon & i OS devices. Extend your storage Make room for your library of movies, music & photos & use your device’s strongest features without fear of running out of space. 6, 700 m Ah smartphone charger Charge your smartphone up to 2.5x & enjoy up to 20 extra hours of video playback or talk time. MLWG3 Pro is a great option for travelling, when wall outlets can be hard to find. Media streaming Stream movies, listen to music & view different photos on multiple mobile devices at once. With up to 13 hours of battery life, MLWG3 has plenty of power to keep the kids entertained on long journeys. Versatile media reader Back up photos & videos from your camera roll to free up space on your smartphone. Easily read SD cards & USB (Universal Serial Bus) Flash drives from your mobile device or your PC. Wi-Fi access point Create a Wi-Fi hotspot for your smartphone, tablet & PC, all from a single wired Internet connection. Avoid paying for Wi-Fi when there’s a free wired connection nearby. Key

Features: Extend your storage by up to 2TB 6700 m Ah smartphone charger Multi-user portable media streaming Versatile media reader Portable Wi-Fi access point

Specification Free up valuable space on your smartphone or tablet Share data with three users simultaneously via Wi-Fi Post & share photos & videos on social media Portable charger for smartphones & tablets Free app for i OS, Android & Kindle Fire Camera Roll support allows users to move photos from their mobile device to Mobile Lite Wireless in order to free up space Features Ethernet port for broadband Internet on the go Unload content to a card or USB (Universal Serial Bus) drive Send pictures to your favourite social media platform Two-year warranty, free technical support Supported File Systems: FAT, FAT32, NTFS, ex FATAudio: MP3, WAV Video: m 4V, mp 4 (H. 264 video codec) Image: jpg, tif Document: pdf Dimensions: 129.14mm x 79.09mm x 19.28mm Weight: 171g Inputs for Storage: USB (Universal Serial Bus) & SD – reads SD, SDHC, SDXC & micro SD/micro SDHC/micro SDXC (with included adapter) Rechargeable Battery: up to 13 hours of continuous use; built-in Li-ion 4640 m Ah 3.8v battery Compatible with: Windows 8.1, Windows 8, Windows 7 (SP1), Windows Vista (SP2), Mac OS X v.10.6.x+, Linux v.2.6.x+



...

Next-Level Speed & Performance Kingston’s Mobile Lite Plus micro SD Reader features USB (Universal Serial Bus) 3.2 Gen 1 speeds along with maximum performance for UHS-II supported micro SD cards & backwards compatibility with UHS-I supported micro SD cards. Use with Kingston’s UHS-II supported micro SD cards for optimal performance & reliability. Increase the efficiency of your workflow with incredible UHS-II speeds for faster file transfers & processing times. It comes in a minimal & compact design for portability, making it the perfect travel companion to take your workflow on the road. The reader is best paired with Kingston Canvas Go! Plus or Canvas React Plus micro SD cards. USB (Universal Serial Bus) 3.2 Gen 1 speeds Peak performance for UHS-II & support for UHS-I cards Designed for optimal performance with Kingston micro SD cards Portable, stylish & minimalist design Durable Specification: Interface: USB (Universal Serial Bus) 3.2 Gen 1 Connector: USB (Universal Serial Bus)-A Standard/ Class: UHS-II Format: ex FAT Operating temperature: 0°C~60°C Storage temperature: -20°C~70°C Compatible with: Windows 10, Windows 8.1, Windows 8, Mac OS X v. 10.10.x+, Linux v.2.6.x+, Chrome OS Warranty: 2 Years ...

Next-Level Speed & Performance Kingston’s Mobile Lite Plus micro SD Reader features USB (Universal Serial Bus) 3.2 Gen 1 speeds along with maximum performance for UHS-II supported micro SD cards & backwards compatibility with UHS-I supported micro SD cards. Use with Kingston’s UHS-II supported micro SD cards for optimal performance & reliability. Increase the efficiency of your workflow with incredible UHS-II speeds for faster file transfers & processing times. It comes in a minimal & compact design for portability, making it the perfect travel companion to take your workflow on the road. The reader is best paired with Kingston Canvas Go! Plus or Canvas React Plus micro SD cards. USB (Universal Serial Bus) 3.2 Gen 1 speeds Peak performance for UHS-II & support for UHS-I cards Designed for optimal performance with Kingston micro SD cards Portable, stylish & minimalist design Durable Specification: Interface: USB (Universal Serial Bus) 3.2 Gen 1 Connector: USB (Universal Serial Bus)-A Standard/ Class: UHS-II Format: ex FAT Operating temperature: 0°C~60°C Storage temperature: ...

Access all your data
- on the go Mobile Lite Wireless works as a portable card reader to give you unlimited access to all of your
...

The Nucleum USB (Universal Serial Bus)-C Hub has you covered whether you want to connect to a larger monitor or need to offload footage from the latest photo shoot. With the Nucleum you can power up your Apple Mac Book while also connecting to a USB (Universal Serial Bus) Flash drive & charging an iPhone. The compact size & built-in cable also make the Nucleum a perfect travel companion to take with you on location. Product Features
- 7 ports of potential from one USB (Universal Serial Bus)-C connection
- Power pass through to charge your connected devices
- Designed for content creators with the included SD & micro SD slots
- Add more pixels using the 4K HDMI output
- Small & light, easy to take with you

Specification Ports: USB (Universal Serial Bus)-C (power input) USB (Universal Serial Bus)-C (data) HDMI (x 2) USB (Universal Serial Bus)-A SD micro SD HDMI Standard: v 1.4 (Supports 4K) USB (Universal Serial Bus)-C: Data: USB (Universal Serial Bus) 3.1 Gen 1 (5 Gb/s) USB (Universal Serial Bus)-A: Data: USB (Universal Serial Bus) 3.1 Gen (5 Gb/s) Power: 55V/1.5A SD Card Reader: SD/SDHC/SDXC UHS I-II micro SD Card Reader: micro SD/micro SDHC/micro SDXC UHS I Power Delivery Pass through: Up to 60W 2 Year Warranty






...

. .. on eighteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. Features Power Supply: VDD=1.2VVDDQ = 1.2VVPP
- 2.5VVDDSPD=2.25V to 2.75 V Functionality & operations comply with the DDR4 SDRAM datasheet 16 internal banks Bank Grouping is applied, & CAS to CAS latency (t CCD_L, t CCD_S) for the banks in the same or different bank group accesses are available Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600 Bi-directional Differential Data Strobe 8-bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Supports ECC error correction & detection On-Die Termination (ODT) Temperature sensor with integrated SPDThis product is in compliance with the Ro HS directive Per DRAM Addressability is supported Internal Vref DQ level generation is available Write CRC is supported at all speed grades CA parity (Command/ Address Parity) mode is supported Extra Info Memory

Size: 16384MBModule

Size: 16384MBMemory Type: DDR4 Memory Package: DIMMPin Configuration: 288 pins Main

Colour: Green






...