About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Stuart Models 10H
Unmachined Set Of
Castings (34-50-71195)
£85.99
The Stuart 10H is a development from the popular 10V Engine. It is more than capable of 'doing work' & can easily power a small dynamo or pump. This small horizontal engine offers both power when run at high speed & visual interest when operated at slow crankshaft speeds. To assist the beginner the book Building a Vertical Steam Engine. is available. It describes in detail the machining of all the components, & is full of advice for the more challenging operations. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart 10H Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications: Length: 6 Inches. Flywheel Diameter: 3 Inches Diameter. Bore: 3/4 Inch Diameter. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, cylinder, valve chest & cover, top & bottom cylinder covers, flywheel. Brass: Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: 10H Unmachined Set of Castings (34-50-71195) ...
Archived Product
image missing
Stuart Models 10V
Machined Kits
(34-50-71185)
£403.00
The Stuart 10V has for many years been the most popular engine in our range. It is powerful enough to drive a 48 inch model steam boat. As with all Stuart Models machined kits it is supplied complete with a hand numbered certificate of authentication. Engine Description: Stuart 10V Fully Machined Kit Specifications:

Height: 6 Inches. Flywheel Dia.: 3 Inches Diameter. Bore: 3/4 Inch. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, standard, cylinder, valve chest & cover, top & bottom cylinder covers, flywheel. Brass: Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: 10V Machined Kits (34-50-71185)

...
Archived Product
image missing
Stuart Models 10V
Ready To Run Models
(34-50-71187)
£589.85
The Stuart 10V has for many years been the most popular engine in our range. It is powerful enough to drive a 48 inch model steam boat. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Ready to Run Stuart 10V. Specifications:
Height: 6 Inches. Flywheel Diameter: 3 Inch Diameter. Cylinder Bore: 3/4 Inch. Cylinder Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, standard, cylinder, valve chest & cover, top & bottom cylinder covers, flywheel. Brass: Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings, Oil Cups & Drain Cocks. Steel: Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: 10V Ready to Run Models (34-50-71187)
...
Archived Product
image missing
Stuart Models 10V
Unmachined (34-50-71183)
£85.99
The Stuart 10V is the most popular engine in our range. The attractive design, & the fact that it can be built on a 3 1/2 in. lathe, make it an ideal project for the novice. To assist the beginner the book " Building a Vertical Steam Engine" is available. It describes in detail the machining of all the components, & is full of advice for the more challenging operations. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart 10V Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications:
Height: 6 Inches. Flywheel Diameter: 3 Inches Diameter. Bore: 3/4 Inch Diameter. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, standard, cylinder, valve chest & cover, top & bottom cylinder covers, flywheel. Brass: Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: 10V Unmachined (34-50-71183)
...
Archived Product
image missing
Stuart Models 5A
Unmachined Set Of
Castings (34-50-71161)
£867.15
The Stuart 5A is a powerful engine from which you would expect many years of hard work. The engine is capable of producing 1 1/2 bhp at 100 psi pressure whilst running at 800 rpm. Its reputation for hard work has led it into many demanding situations for example driving dynamos, pumps, compressors & other machinery. An optional discwheel, feed pump & reverse gear are available which would enable you to use this model as a marine engine. Please note that we only supply this engine as a set of castings & drawings, there are no materials or fixings in the kit. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart 5A Castings & Drawings only. Specifications:
Height: 15 Inches. Flywheel Diameter: 7 1/2 Inches. Cylinder Bore: 2 1/4 Inch Diameter. Cylinder Stroke: 2 Inches. Contents: Cast Iron: Boxbed, soleplate, standard, cylinder, valve chest & cover, top & bottom cylinder covers, piston, eccentric sheave, bearing caps, flywheel. Gunmetal: Slide valve, eccentric strap, connecting rod bearings, glands, crankshaft bearings. Steel: Connecting rod, eccentric rod, piston rod & crosshead. Sundries: Detailed drawings, cylinder lagging. Manufacturer: Stuart Models Model / Part No: 5A Unmachined Set of Castings (34-50-71161)
...
Archived Product
image missing
Stuart Models 7A
Unmachined Set Of
Castings (34-50-71170)
£233.75
The Stuart 7A can be completed using only a small lathe making it suitable for the beginner. The book Building a Vertical Steam Engine will be very useful for anyone making this model. Please note that this picture shows the optional Reverse Gear fitted to the model, this is available as an optional accessory. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart 7A Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications:
Height: 7 1/2 Inches. Flywheel Diameter: 3 1/2 Inches. Cylinder Bore: 1 Inch Diameter. Cylinder Stroke: 1 Inch. Contents: Cast Iron: Boxbed & soleplate, standard, cylinder, valve chest & cover, top & bottom cylinder covers, piston, eccentric sheave, flywheel. Gunmetal: Slide valve, eccentric strap, connecting rod, valve operating block, glands, crosshead, crankshaft bearings. Steel: Crankshaft, piston & valve rods, all materials for valve gear. Sundries: Detailed drawings, cylinder lagging, gasket material, piston rings, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: 7A Unmachined Set of Castings (34-50-71170)
...
Archived Product
image missing
Stuart Models Beam
Machined Kits
(34-50-71391)
£1108.00
The Stuart Beam is a relatively simple engine to construct. The use of Watts parallel motion makes this engine fascinating to watch, particularly at slow speeds. As with all Stuart Models machined kits the Stuart Beam is supplied complete with a hand numbered certificate of authentication. Engine Description: Stuart Beam Machined Kit Specifications: Length: 13 Inches. Flywheel Diameter: 7 Inches Diameter. Bore: 1 Inch Diameter. Stroke: 2 Inches. Contents: Cast Iron: Bedplate, column, beam, pedestal, pulley, crank, cylinder, valve chest & cover, top & bottom cylinder covers, piston, flywheel. Brass: Slide valve, eccentric strap, valve opperating block, glands, conrod bush, crankshaft bearings, beam bearings, entablature bearings, valve gear bearings. Steel: Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, crankpin, beam shaft, entablatures, piston & valve rods, valve gear & parallel motion. Sundries: Detailed drawings, gaskets, viton "O" ring, gland packing, fixing pack. Manufacturer: Stuart Models Model / Part No: Beam Machined Kits (34-50-71391) ...
Archived Product
image missing
Stuart Models Beam
Ready To Run Models
(34-50-71392)
£1722.55
The Stuart Beam is a relatively simple engine to construct. The use of Watts parallel motion makes this engine fascinating to watch, particularly at slow speeds. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Stuart Beam Finished Engine Specifications: Length: 13 Inches. Flywheel Diameter: 7 Inches. Bore: 1 Inch Diameter. Stroke: 2 Inches. Contents: Cast Iron: Bedplate, column, beam, pedestal, pulley, crank, cylinder, valve chest & cover, top & bottom cylinder covers, piston, flywheel. Brass: Slide valve, eccentric strap, valve opperating block, glands, conrod bush, crankshaft bearings, beam bearings, entablature bearings, valve gear bearings. Steel: Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, crankpin, beam shaft, entablatures, piston & valve rods, valve gear & parallel motion. Sundries: Detailed drawings, gaskets, viton "O" ring, gland packing, fixing pack. Manufacturer: Stuart Models Model / Part No: Beam Ready to Run Models (34-50-71392) ...
Archived Product
image missing
Stuart Models Beam
Unmachined Set Of
Castings (34-50-71390)
£275.99
The Stuart Beam is a relatively simple engine to construct. The use of Watts parallel motion makes this engine fascinating to watch, particularly at slow speeds. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart Beam Engine Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications: Length: 13 Inches. Flywheel Diameter: 7 Inches. Bore: 1 Inch Diameter. Stroke: 2 Inches. Contents: Cast Iron: Bedplate, column, beam, pedestal, pulley, crank, cylinder, valve chest & cover, top & bottom cylinder covers, piston, flywheel. Brass: Slide valve, eccentric strap, valve opperating block, glands, conrod bush, crankshaft bearings, beam bearings, entablature bearings, valve gear bearings. Steel: Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, crankpin, beam shaft, entablatures, piston & valve rods, valve gear & parallel motion. Sundries: Detailed drawings, gaskets, viton "O" ring, gland packing, fixing pack. Manufacturer: Stuart Models Model / Part No: Beam Unmachined Set of Castings (34-50-71390) ...
Archived Product
image missing
Stuart Models Compound
Launch Unmachined Set
Of
Castings (34-50-71385)
£275.99
The Compound & Twin Launch are, with the exception of the cylinders, essentially the same engine. The advantage of the Compound is that the steam consumption is much more efficient than that of the Twin Launch. This model is supplied as a set of castings complete with reverse gear, piston rings, fixings & fittings & will power between a four & a half & six foot boat. Engine Description: Stuart Compound Launch Set of Unmachined Castings, Fixings & Drawings. Specifications:
Height: 5 1/2 Inches. Discwheel Diameter: 1 3/4 Inch. Cylinder Bores: 3/4 Inch & 1 1/4 Inch. Cylinder Stroke: 7/8 Inch. Contents: Cast Iron: Cylinder casting, valve chests & covers, top & bottom cylinder covers, pistons, eccentric sheaves, discwheel. Gunmetal: Soleplate, slider bracket, connecting rods, eccentric rods, slide valves, flanges, glands, crossheads, crankshaft bearings. Sundries: Detailed drawings, cylinder lagging, gasket material, piston rings, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Compound Launch Unmachined Set of Castings (34-50-71385)
...
Archived Product

Stuart Models 6A Unmachined Set Of Castings (34-50-71449)

The Stuart 6A is the largest engine in our range, being capable of producing approximately 4 bhp at 120 psi whilst running at 750 rpm. This is enough power to drive an eighteen to twenty two foot boat. This engine is fitted with a boiler feed pump as standard to keep the water supply constant. A condenser is also fitted together with an Edwards style pump to keep it clear of condensate. The Stuart 6A is only supplied as a full set of castings and drawings, we do not supply any fixings or materials. Please remember our sets of castings require the use of a lathe and milling machine to turn them into a working steam engine. Engine Description: Stuart 6A Castings and Drawings only. Specifications:Height: 20 Inches.Width: 14 7/8 Inches.Length: 17 5/8 Inches.Cylinder Bore: 2 1/2 Inches and 4
Inches.Cylinder Stroke: 3 Inches. Contents: Cast Iron: Soleplate, standards, cylinder block, valve chest and covers, top and bottom cylinder covers, pistons, eccentric sheaves, main bearing caps, balance weights, slide valves, discwheel.Gunmetal: Eccentric straps, glands, flanges, connecting rod bearings, crankshaft bearings, crosshead pin bearings, valve gear anchor trunion, air pump drive trunion, air pump inlet chamber, air pump cylinder, air pump gland, air pump delivery valve chamber, boiler feed pump body, valve spindle guide.Sundries: Detailed drawings.
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£2178.99
creative toys Creative Toys
Description Reviews / Comments Add New

Product Description

The Stuart 6A is the largest engine in our range, being capable of producing Approx. 4 bhp at 120 psi whilst running at 750 rpm. This is enough power to drive an eighteen to twenty two foot boat. This engine is fitted with a boiler feed pump as standard to keep the water supply constant. A condenser is also fitted together with an Edwards style pump to keep it clear of condensate. The Stuart 6A is only supplied as a full set of castings & drawings, we do not supply any fixings or materials. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart 6A Castings & Drawings only. Specifications:
Height: 20 Inches.
Width: 14 7/8 Inches. Length: 17 5/8 Inches. Cylinder Bore: 2 1/2 Inches & 4 Inches. Cylinder Stroke: 3 Inches. Contents: Cast Iron: Soleplate, standards, cylinder block, valve chest & covers, top & bottom cylinder covers, pistons, eccentric sheaves, main bearing caps, balance weights, slide valves, discwheel. Gunmetal: Eccentric straps, glands, flanges, connecting rod bearings, crankshaft bearings, crosshead pin bearings, valve gear anchor trunion, air pump drive trunion, air pump inlet chamber, air pump cylinder, air pump gl&, air pump delivery valve chamber, boiler feed pump body, valve spindle guide. Sundries: Detailed drawings.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Engine - A machine designed to convert fuel into motion
Foot - A part of the body at the bottom end of the leg
Foot - or Feet - a measurement equivilent to 30cm
water - A chemical substance. Chemical formula H2O.
iron - An electrical deviced used for removing creases from fabrics
iron - A chemical element (FE). The most common element on earth
Steam - Steam - water in gas form, water vapour. Commonly seen coming from a kettle
delivery - The method by which something is delivered from one location to another
RPM - Revolutionss per minute, the number of rotations per minute around a fixed axel.
Weights - Weights are used for meaasuring, exercise and many other applications. Each weight has a value as a measurement of how heavy it is.
running - A sport or hobbie of moving rapidly on foot. Can also refer to the running of equipment or run time refering to the length of time an applicance can run or the quiet running of an applicance.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Width - The measurement of something from one side to the other.
Balance - Something that is evenly weighted to keep something upright.
Bearings - A direction or a way someone moves around.
Gunmetal - A dark grey colour, or can also be related to a corrosion resistant bronze.
Valve - An opening and closing to control the movement of fluid through pipes.
Fixings - An action of sticking an item to another surface.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

"stuart 6a" (1 person tagged the product this way)
Menu