Want a sports aerobatic model that is economic to buy, economic to operate & stunning to fly? Youve just found it! The ST Models MX-2 is based on the full size, aerobatic aircraft of the same name & then modified for model flying characteristics. Supplied complete with powerful 920 Kv brushless motor, 12 x 6 propeller, 4 channel 2.4g Hz AFHSS radio, a 30A brushless ESC, four powerful new 9g servos & with them all pre-installed. All that is needed is 30 minutes of final assembly & applying the stunning colour decals. Setups are provided for both sports & 3D flying (even mixes). For serious 3D pilots, the movements make maneouvres like static loops, rolls & the waterfall & parachute quite within your reach. To provide that 3D control power with precision has been achieved with a totally new servo amplifier to give high resolution & holding power combined with strong torque. The control pushrods are kept short by placing each servo close to the surface it is operating. Using a 3S 2100-2500m Ah Li-Po, there is enough power to hover vertically with ease & then punch out straight up! The choice of a 12 x 6 propeller limits the torque turn effect & eases current consumption by matching the load & motor power/ Kv rating effectively. Torque rolls are possible in both directions. Access to the battery is via a clip-in underside hatch, simple! Like all ST models, the airframe is moulded accurately in ding resistant EPO foam. The wings are removable by removing the two quick turn locking screws & sliding out of the fuselage, great for compact transportation. Access to the radio compartment requires pulling off the clip-on canopy moulding. The tough, aluminium undercarrige soaks up those landings on our club patches so well, but the model is hardly moving forward anyway! As a model to hone your aerobatic skills or just cruise around on a Sunday afternoon, the ST Models MX-2 is hard to beat. & it looks cool too! Specification Wingspan: 1210mm (47.6in) Length: 1106mm (43.5in) Weight: 960g (33.8oz) Typical Radio System: ST 2.4 G Hz Tx & Rx (Included) Wing Loading: 35.16 g/dm 2 (11.5 oz.sq.in) Wing Area: 27.3dm 2 (423.2 sq.in) Li Po: Intellect 3S 2100m Ah 20C Recommended Manufacturer: Ripmax Model / Part No: ST Model MX2 EP ARTF 2.4G (A-STM050)